Free English SONY BRAVIA KD-65X80CK (01) PDF document. Download the PDF, use the online viewer, or browse the FAQs for easy troubleshooting.
CLICK HERE TO DOWNLOAD SONY BRAVIA KD-65X80CK (01) PDF DOCUMENT
If this is not the document you want for this product, click here to see if we have any other documents for this product.
How to use the PDF below:
* Touchscreen: Swipe up/down with-in the PDF to scroll and pinch or spread with two fingers to zoom.
* Mouse: While your mouse is hovering over the PDF, use the mouse wheel to scroll and click on the – / + buttons at the bottom of the PDF to zoom.
How do I open the Help Guide on my SONY BRAVIA KD-65X80CK?
To open the Help Guide on your SONY BRAVIA KD-65X80CK, press the Input button on the remote control and select Help. If Help does not exist, select Edit and add Help.
What are the recommended steps for securing my SONY BRAVIA KD-65X80CK to prevent it from toppling?
You should secure your SONY BRAVIA KD-65X80CK to a wall and or a stand. Do not allow children to climb on furniture or the TV. Avoid placing items on the TV. Never install the TV on slippery, unstable, or uneven surfaces, or on furniture that can be used as steps. Route cables so they are not accessible to children.
How can I secure my SONY BRAVIA KD-65X80CK to a stand using an angle brace?
First, ensure the stand can support the weight of your SONY BRAVIA KD-65X80CK. Use two angle braces (not supplied) to secure the stand. For each angle brace, attach one side to a wall stud and the other side to the stand. Then, use M6 machine screws (not supplied) to secure the TV to the stand using a rope or chain that is strong enough to support the weight of the TV, ensuring there is no excess slack.
What should I do if my SONY BRAVIA KD-65X80CK does not turn on immediately?
When you plug in the SONY BRAVIA KD-65X80CK, it may not turn on for a while even if you press the power button, as it takes time to initialize the system. Please wait for about one minute and then operate it again.
How do I reset my SONY BRAVIA KD-65X80CK to factory settings?
You can reset the SONY BRAVIA KD-65X80CK to factory settings by selecting Factory data reset in the menu. To force a factory reset, unplug the AC power cord. Press and hold the power button on the TV, then plug in the AC power cord while continuing to hold the button.
What should I do if I forget the parental lock password on my SONY BRAVIA KD-65X80CK?
If you have forgotten the parental lock password for your SONY BRAVIA KD-65X80CK, enter 4357 for the PIN and then enter the new PIN.
What should I do if the remote control for my SONY BRAVIA KD-65X80CK does not function?
First, replace the batteries. Ensure that you are pointing the remote control directly at the IR sensor on your SONY BRAVIA KD-65X80CK and that no objects are blocking the path. Fluorescent lamps may interfere with the signal; try turning them off.
How do I detach the Table-Top Stand from my SONY BRAVIA KD-65X80CK?
Three or more people are required to detach the Table-Top Stand from your SONY BRAVIA KD-65X80CK. Remove one side of the Table-Top Stand at a time, holding it firmly with both hands while other people lift the TV. Then repeat for the other side. Take care when handling to prevent the TV from falling.
What is the wall-mount hole pattern for the SONY BRAVIA KD-65X80CK?
The wall-mount hole pattern for the SONY BRAVIA KD-65X80CK is 300 x 300 mm.
How do I perform general troubleshooting for my SONY BRAVIA KD-65X80CK?
If you experience issues like a black screen, no sound, frozen picture, or network loss, follow these steps: First, restart your SONY BRAVIA KD-65X80CK by pressing the power button on the remote for about five seconds. If it does not recover, unplug the AC power cord, then press the power button on the TV and release it. Wait for two minutes and plug it back in. Alternatively, press the power button on the TV for about 40 seconds until it turns off. You can also perform a software update or a factory data reset.
CLICK HERE TO DOWNLOAD SONY BRAVIA KD-65X80CK (01) PDF DOCUMENT