SONY BRAVIA KD-75X80K (03) PDF Document

To open the help guide, press the Input button on the remote control and select Help. If Help does not exist, select Edit and add Help.

When moving your SONY BRAVIA KD-75X80K, please consider the following: Disconnect all cables when carrying the TV. Two or more persons are needed to transport a large TV set. Correct hand placement while carrying the TV is very important for safety and to avoid damage.

Avoid moving the TV from a cold area to a warm area. Sudden room temperature changes may cause moisture condensation, which may cause the TV to show poor picture or poor color. Should this occur, allow moisture to evaporate completely before powering the TV on.

You should take measures to prevent the SONY BRAVIA KD-75X80K from toppling over. You can secure the TV to a wall or a stand. Do not allow children to play or climb on furniture and TV sets, and avoid placing or hanging items on the TV. Never install the TV on slippery, unstable, or uneven surfaces, or furniture that can easily be used as steps. Route all AC power cords and connecting cables so that they are not accessible to curious children.

To secure the SONY BRAVIA KD-75X80K to a stand, first secure the stand itself. Make sure the stand can adequately support the weight of the TV and use two angle braces to secure the stand to a wall stud. Then, secure the TV to the stand using M6 machine screws to attach to the TV’s rear cover, and use a rope or chain that is strong enough to support the weight of the TV, ensuring there is no excess slack.

For general issues like black screen, no sound, frozen picture, or network loss, first restart your TV by pressing the power button on the remote control for about five seconds. If the TV does not recover, try unplugging the AC power cord, press the power button on the TV, release it, wait for two minutes, and plug in the AC power cord. Alternatively, press the power button on the TV for about 40 seconds until the TV turns off. You should also refer to the on-screen help menu, ensure your software is updated, and perform a factory data reset if necessary.

You can reset the SONY BRAVIA KD-75X80K to factory settings by selecting Factory data reset in the settings menu. To force a factory data reset, unplug the AC power cord. Press and hold the power button on the TV, then plug in the AC power cord while holding the button.

If you have forgotten the parental lock password for your SONY BRAVIA KD-75X80K, enter 4357 for the PIN and then enter your new PIN.

The wall-mount hole patterns for the SONY BRAVIA KD-75X80K models are as follows:

To detach the Table-Top Stand from the SONY BRAVIA KD-75X80K, remove one side of the Table-Top Stand at a time. Firmly hold the Table-Top Stand securely with both hands while other people lift up the TV. Repeat the step to remove the other side. Three or more people are required to detach the Table-Top Stand. Ensure the TV is vertical before turning it on, as powering on with the LCD panel facing down may cause uneven picture uniformity.