SONY BRAVIA KD-43XG80XX (01) PDF Document

When the SONY BRAVIA KD-43XG80XX is off, press the Power button () to power it on.

When the SONY BRAVIA KD-43XG80XX is on, press and hold the Power button () to power it off.

Press the Power button () repeatedly to change the function, then press the + or – button to adjust the volume, select the channel, or select the input source of the TV.

Item 2 on the SONY BRAVIA KD-43XG80XX is the Remote Control sensor*, Light sensor*, and Illumination LED. The illumination LED lights up or blinks according to the status of the TV.

Restart your SONY BRAVIA KD-43XG80XX by pressing the power button on the remote control until a message appears. The TV will restart. If the TV does not recover, try unplugging the mains lead. Then press the power button on the TV and wait for two minutes, and plug in the mains lead.

Count how many times it flashes (the interval time is three seconds) on the SONY BRAVIA KD-43XG80XX.

Reboot the TV by disconnecting the mains lead until the illumination LED stopped flashing in red, then turn on the TV.

If the problem persists, disconnect the mains lead, and contact your dealer or Sony service centre with the number of times the illumination LED flashes.

Check the antenna (aerial)/cable connection and booster settings on the SONY BRAVIA KD-43XG80xx.

Select terrestrial/cable service by pressing DIGITAL/ANALOG on the remote control. If the broadcasting service is not displayed, press TV and then press DIGITAL/ANALOG.

Terrestrial signal might be suppressed if there is a strong signal supplied nearby.

After moving to a new house or trying to receive new services, attempt a service search by selecting [Digital tuning].

The specifications for the Wireless LAN (IEEE 802.11ac/a/b/g/n) on the SONY BRAVIA KD-43XG80XX are listed in the table below:

The specifications for Bluetooth on the SONY BRAVIA KD-43XG80XX are listed in the table below:

Press HELP on the remote control to know the software version for your SONY BRAVIA KD-43XG80XX.

Alternatively, press HOME, then select [Settings]  [Voice Remote Control]  [Software version].

The output rating for USB 1/2 is 5 V , 500 mA MAX on the SONY BRAVIA KD-43XG80XX.

The output rating for USB 3 is 5 V , 900 mA MAX on the SONY BRAVIA KD-43XG80XX.

Press the Power button () repeatedly to change the function, then press the + or – button to adjust the volume on the SONY BRAVIA KD-43XG80XX.

Press the Power button () repeatedly to change the function, then press the + or – button to select the channel on the SONY BRAVIA KD-43XG80XX.

Press the Power button () repeatedly to change the function, then press the + or – button to select the input source of the TV on the SONY BRAVIA KD-43XG80XX.

Use voice search by pressing the Microphone button () (e.g., Search various content by voice) on the remote control for the SONY BRAVIA KD-43XG80XX. The voice search requires an Internet connection.

Display the connected External Box (cable/satellite box) menu by pressing the EXT.BOX MENU button on the remote control for the SONY BRAVIA KD-43XG80XX.

For models with a supplied IR Blaster, connect and set up the IR Blaster.

The External Box menu may be displayed for some HDMI CEC compatible devices when the IR Blaster is not supplied or connected.

Use the Navigation D-Pad (////) on the remote control for menu navigation and selection on the screen of the SONY BRAVIA KD-43XG80XX.

Switch to a TV channel or input and display the TV Menu Bar by pressing the TV button on the remote control for the SONY BRAVIA KD-43XG80XX.

In TV mode, display and select the input source by pressing the Input select/Text hold button (/) on the remote control for the SONY BRAVIA KD-43XG80XX.

In Text mode, hold the current page by pressing the Input select/Text hold button (/) on the remote control for the SONY BRAVIA KD-43XG80XX.

Turn on or turn off the SONY BRAVIA KD-43XG80XX (standby mode) by pressing the TV standby button () on the remote control.

Switch between digital and analogue input by pressing the DIGITAL/ANALOG button on the remote control for the SONY BRAVIA KD-43XG80XX.

Switch between TV or RADIO broadcasts by pressing the TV/RADIO button on the remote control for the SONY BRAVIA KD-43XG80XX.

Return to the previous screen or exit from the menu by pressing the EXIT button on the remote control for the SONY BRAVIA KD-43XG80XX. When an Interactive Application service is available, press EXIT to exit from the service.

Display information by pressing the Info/Text reveal button (/) on the remote control for the SONY BRAVIA KD-43XG80XX.

Display text information by pressing the Text button () on the remote control for the SONY BRAVIA KD-43XG80XX.

Access the “Google Play” online service by pressing the Google Play button on the remote control for the SONY BRAVIA KD-43XG80XX.

Access the “NETFLIX” online service by pressing the NETFLIX button on the remote control for the SONY BRAVIA KD-43XG80XX. This is only available on limited regions/countries/TV models.

Execute the corresponding function at that time by pressing the Colour buttons on the remote control for the SONY BRAVIA KD-43XG80XX.

Display a list of contextual functions by pressing the ACTION MENU button on the remote control for the SONY BRAVIA KD-43XG80XX.

Display the digital programme guide, or EPG of External Box (cable/satellite box) after setting [IR Blaster setup] by pressing the GUIDE button on the remote control for the SONY BRAVIA KD-43XG80XX (IR Blaster compatible models only).

Access various services and applications by pressing the APPS button on the remote control for the SONY BRAVIA KD-43XG80XX.

Return to the previous screen by pressing the BACK button on the remote control for the SONY BRAVIA KD-43XG80XX.

Display the TV Home Menu by pressing the HOME button on the remote control for the SONY BRAVIA KD-43XG80XX.

Adjust the volume by pressing the +/- (Volume) buttons on the remote control for the SONY BRAVIA KD-43XG80XX.

Jump back and forth between two channels or inputs by pressing the Jump button () on the remote control for the SONY BRAVIA KD-43XG80XX. The TV alternates between the current channel or input and the last channel or input that was selected.

Mute the sound by pressing the Mute button () on the remote control for the SONY BRAVIA KD-43XG80XX. Press again to restore the sound.

In TV mode, select the channel by pressing PROG +/- on the remote control for the SONY BRAVIA KD-43XG80XX.

In Text mode, select the next () or previous () page by pressing the corresponding buttons.

Select the sound of a multilingual source or dual sound for the programme currently being viewed by pressing the AUDIO button on the remote control for the SONY BRAVIA KD-43XG80XX (depending on the programme source).

Operate media contents on the SONY BRAVIA KD-43XG80XX and connected BRAVIA Sync-compatible device by using the playback/control buttons (//////) on the remote control.

Turn subtitles on or off by pressing the Subtitle setting button () on the remote control for the SONY BRAVIA KD-43XG80XX (when the feature is available).

Display the Help menu by pressing the HELP button on the remote control for the SONY BRAVIA KD-43XG80XX. The Help Guide can be accessed from here.

Record the currently viewed programme on the USB HDD by pressing the REC button on the remote control for the SONY BRAVIA KD-43XG80XX.

Display the Title list by pressing the TITLE LIST button on the remote control for the SONY BRAVIA KD-43XG80XX.

Use the Wall-Mount Bracket SU-WL450 (not supplied) to install the SONY BRAVIA KD-43XG80XX to the wall. When installing the Wall-Mount Bracket, also refer to the Operating Instructions and Installation Guide supplied with the Wall-Mount Bracket.

Be sure to store the removed screws in a safe place, keeping them away from children.

For instructions on Wall-Mount Bracket installation, see the Installation Information (Wall-Mount Bracket) on the product page for your TV model.

The torque specification for securing the Wall-Mount Bracket on the SONY BRAVIA KD-43XG80XX is 1.5 N·m {15 kgf·cm}, using the M6 screw (not supplied) and the screw (not supplied) with the cord (not supplied).

The screws used should be 8 mm – 12 mm in length, measured from the attaching surface of the Wall-Mount Bracket to the TV’s rear cover.

Three or more people are required to detach the Table-Top Stand from the SONY BRAVIA KD-43XG80XX.

Be careful not to use excessive force while detaching the Table-Top Stand from the TV as it may cause the TV set to fall resulting in personal injury or physical damage to the TV.

Take care when handling the Table-Top Stand to prevent damage to the TV.

Be careful when lifting the TV as the Table-Top Stand is detached, the Table-Top Stand may topple over and cause personal injury.

Take care when removing the Table-Top Stand from the TV to prevent it from falling over and damaging the surface that the TV is sitting on.