Free English LOST VAPE URSA NANO 2 POD KIT (01) PDF document. Download the PDF, use the online viewer, or browse the FAQs for easy troubleshooting.
CLICK HERE TO DOWNLOAD LOST VAPE URSA NANO 2 POD KIT (01) PDF DOCUMENT
If this is not the document you want for this product, click here to see if we have any other documents for this product.
How to use the PDF below:
* Touchscreen: Swipe up/down with-in the PDF to scroll and pinch or spread with two fingers to zoom.
* Mouse: While your mouse is hovering over the PDF, use the mouse wheel to scroll and click on the – / + buttons at the bottom of the PDF to zoom.
What are the basic parameters for the LOST VAPE URSA NANO 2 POD KIT?
The basic parameters for the LOST VAPE URSA NANO 2 POD KIT are as follows:
| Dimension | 83.7*25.5*16.05mm |
| Net Weight | 85±5g |
| Battery Capacity | 900mAh (built-in) |
| Pod Capacity | 2.5ml (Standard/2ml TPE) |
| Power Range | 9W-22W |
| Charging Support | Supports 5V/1A charger |
| Body Material | Zinc Alloy + Plastic |
How do I check the charging indication status on the LOST VAPE URSA NANO 2 POD KIT?
Vape slowly when charging. The LED panel indicator shows the charging status as follows:
- Red Light: <3.7V
- Blue Light: 3.7V-3.9V
- Green Light: 3.9V-4.2V (Full Charged, about 4.2V)
What are the warning descriptions indicated by the LED panel on the LOST VAPE URSA NANO 2 POD KIT?
The LED panel provides the following warning descriptions:
- Low Battery: LED panel indicator will flash red 5 times when the battery is low.
- Open Circuit: LED panel indicator will flash 3 times when there is an open circuit, meaning no output.
- Short Circuit: LED panel indicator will flash white 3 times when a short circuit occurs.
- Over 10s: LED panel indicator will flash 5 times when taking a puff longer than 10 seconds while you vape.
What is the recommended procedure for filling the pod with E-Liquid in the LOST VAPE URSA NANO 2 POD KIT before first use?
Before using the pod for the first time, you must fill the oil tank with e-liquid and let it sit for at least 5 minutes. This will allow the cotton inside your new coil to absorb plenty of e-liquid, preventing dry burn of the coil.
What are the components overview for the LOST VAPE URSA NANO 2 POD KIT?
The components of the LOST VAPE URSA NANO 2 POD KIT include:
- Drip Tip
- Pod
- E-liquid Filling Plug
- Airflow Control
- LED Panel
- Type-C Port
- Built-in 900mAh Battery
What should be done if the LED panel indicator on the LOST VAPE URSA NANO 2 POD KIT flashes red 5 times when vaping?
If the LED panel indicator flashes red 5 times while you are vaping, it indicates a low battery condition on the LOST VAPE URSA NANO 2 POD KIT.
What does it mean when the LED panel indicator flashes white 3 times on the LOST VAPE URSA NANO 2 POD KIT?
The LED panel indicator flashing white 3 times on the LOST VAPE URSA NANO 2 POD KIT indicates a short circuit.
CLICK HERE TO DOWNLOAD LOST VAPE URSA NANO 2 POD KIT (01) PDF DOCUMENT