Free English LOST VAPE URSA BABY 2 POD KIT (01) PDF document. Download the PDF, use the online viewer, or browse the FAQs for easy troubleshooting.
CLICK HERE TO DOWNLOAD LOST VAPE URSA BABY 2 POD KIT (01) PDF DOCUMENT
If this is not the document you want for this product, click here to see if we have any other documents for this product.
How to use the PDF below:
* Touchscreen: Swipe up/down with-in the PDF to scroll and pinch or spread with two fingers to zoom.
* Mouse: While your mouse is hovering over the PDF, use the mouse wheel to scroll and click on the – / + buttons at the bottom of the PDF to zoom.
What are the basic parameters of the LOST VAPE URSA BABY 2 POD KIT?
The basic parameters for the LOST VAPE URSA BABY 2 POD KIT are as follows:
| Feature | Value |
| Battery Voltage | 3.0V – 4.2V |
| Pod Capacity | 3ml |
How is the charging status indicated on the LOST VAPE URSA BABY 2 POD KIT?
The LED panel indicator shows the battery status while charging according to the following criteria:
| Light Status | Voltage Indication |
| Red Light | < 3.7V |
| Blue Light | 3.7V – 3.9V |
| Stay Green Full Charged | About 4.2V |
What do the flashing light patterns on the LED panel of the LOST VAPE URSA BABY 2 POD KIT signify regarding warnings or faults?
The LED panel indicator displays warnings and fault conditions as described below:
| Condition | LED Behavior |
| Low Battery | LED panel indicator flashes red 5 times and output will stop using, or lower than 3.0V when vaping. |
| Open Circuit | LED indicator will flash 3 times when no atomizer is detected or the heating wire of the atomizer is broke. |
| Short Circuit | LED panel indicator flashes 8 times. |
What are the steps to fill the pod cartridge with e-liquid in the LOST VAPE URSA BABY 2 POD KIT?
To fill the pod cartridge with e-liquid on the LOST VAPE URSA BABY 2 POD KIT, follow these steps:
Step 1. Take out the Pod Cartridge.
Step 2. Open the silicone plug.
Step 3. Fill the e-liquid into the hole.
Step 4. Plug the silicone plug back in.
Step 5. Insert the Pod Cartridge into the device.
What are the main components overview of the LOST VAPE URSA BABY 2 POD KIT?
The components overview for the LOST VAPE URSA BABY 2 POD KIT includes the following parts:
LED Panel Indicator
Airflow
E-liquid Refill Hole
Mouthpiece
Pod Cartridge
Type-C Port
CLICK HERE TO DOWNLOAD LOST VAPE URSA BABY 2 POD KIT (01) PDF DOCUMENT