LOST VAPE MIRAGE DNA75C (01) PDF Document

The main features of the LOST VAPE MIRAGE DNA75C are:

■ Powered by Evolv DNA 75C Board

■ Wattage Control / Temperature Protection

■ Full Color TFT Screen

■ Theme Designer Software

■ Customizable User Interface

■ Escribe Software / Firmware Upgradable

■ Onboard Programmable Multicolor LED

■ Stainless Steel 510 Atomizer Connector

■ Anodized Aluminum Frame

■ Resin-Wood or Resin-Only Body

■ Single 18650/20700/21700 Convertible

■ Flip-Open Battery Sled

■ Temperature Limit: 200°F-600°F

■ Output Power: 1-75 Watts

■ Integrated 1Amp On-board Balanced Charger

■ Dimensions: 43.5mm*28mm*93mm

The standard package for the LOST VAPE MIRAGE DNA75C includes:

1 x Mirage DNA 75C Device

1 x USB Charging Cable

1 x Mirage Gift Box

1 x Mirage USER Manual

1 x 18650 Battery Adapter

The main components are:

• 510 Atomizer Connector

• Fire Button

• Programmable Multicolor LED Indicator

• Full Color TFT Screen Display

• Up Button

• Select Button

• Down Button

• USB Port (Charging & Firmware Update)

• 18650 Battery Adapter

• Flip-Open Battery Sled (18650/20700/21700 Convertible)

Escribe is a software package used to configure, monitor and modify the operation of your LOST VAPE MIRAGE DNA75C. It installs on a Windows PC and connects to your device using the USB port. You must go to the Escribe and update the latest firmware before using the device.

The LOST VAPE MIRAGE DNA75C has a full color 80 x 160 px TFT screen.

To install the battery:

• If using a 18650 battery, put the included battery adapter cap on the negative side of the 18650 battery, then place the 18650 battery into the device.

• If using a 20700 or 21700 battery, just place the battery into the device.

There are two methods for charging the battery:

External charging (Recommended):

Remove the battery from the device. Follow the charging instructions provided with your external charger.

Internal charging:

The LOST VAPE MIRAGE DNA75C has a built-in 1A USB charger. It automatically detects the type of USB power supply it is connected to, so it can be plugged into standard PC USB ports or higher power chargers.

The LOST VAPE MIRAGE DNA75C will indicate a variety of error states:

Check Atomizer: The device does not detect an atomizer, the atomizer has shorted out, or the atomizer resistance is incorrect for the power setting.

Shorted: The atomizer or wiring are short circuited.

Weak Battery: The battery needs to be charged, or a higher amp rated battery needs to be used. If this happens, the device will continue to fire the atomizer, but will not be able to provide the desired wattage. The Weak Battery message will continue to display for a few seconds after the end of the puff.

Check Battery: The battery is deeply discharged and needs to be charged, or is damaged. If this happens, the device will not fire the atomizer. The Check Battery message will continue to display for a few seconds after attempting to fire the device. You should remove and replace the battery.

Temperature Protected: The heating coil reached the maximum allowed temperature during the puff. If this happens, the device will continue to fire, but will not be able to provide the desired wattage.

Ohms Too High: The resistance of the atomizer coil is too high for the current wattage setting. If this happens, the device will continue to fire, but will not be able to provide the desired wattage. The Ohms Too High message will continue to display for a few seconds after the end of the puff.

Ohms Too Low: The resistance of the atomizer coil is too low for the current wattage setting. If this happens, the device will continue to fire, but will not be able to provide the desired wattage. The Ohms Too Low message will continue to display for a few seconds after the end of the puff.

Too Hot: The device has onboard temperature sensing. It will shut down and display this message if the internal board temperature becomes excessive.

Please adhere to the following safety recommendations:

1. This device is intended for users over the age of 18, and not by minors, women who are pregnant or breast feeding, or people with or at risk of heart disease, high blood pressure, hypertension, diabetes, or taking medicine for depression or asthma.

2. This product is sold purely for recreational purposes; it is not a smoking cessation product and has not been tested as such.

3. Please ensure this product is kept away from extreme high and low temperatures and moist environment while in use or stored.

4. The manufacturer is not responsible for any damage or personal injury caused by inappropriate, incorrect or irresponsible use of the device.

5. Do not over-tighten the atomizer onto the 510 connector; the atomizer should be snug, not tight. Over-tightening may cause damage to the threading and the delrin insulator.

6. This is a high-end and powerful device capable of providing a high voltage to the atomizer. We recommend only using the 18650/20700/21700 battery that are rated no less than 30A.

7. Due care and attention must be followed when using this mod. This is for experienced vapers with extensive knowledge of how electronic devices work along with access to the appropriate safety tools. Please ensure proper precautions are taken when using these devices as to not cause damage and/or harm to the atomizer, device, or yourself. Use at your own risk.

8. Battery safety is very important. If you remove the battery from the device, please store it in a dry place, at room temperature, and away from direct sunlight. The batteries should never be left unattended while charging. Please take extra care when you removing/replacing the battery. Always dispose of batteries in a safe manner, into a designated container for battery recycling.