Free English PYLE PLCMRV77WP (01) PDF document. Download the PDF, use the online viewer, or browse the FAQs for easy troubleshooting.
CLICK HERE TO DOWNLOAD PYLE PLCMRV77WP (01) PDF DOCUMENT
If this is not the document you want for this product, click here to see if we have any other documents for this product.
How to use the PDF below:
* Touchscreen: Swipe up/down with-in the PDF to scroll and pinch or spread with two fingers to zoom.
* Mouse: While your mouse is hovering over the PDF, use the mouse wheel to scroll and click on the – / + buttons at the bottom of the PDF to zoom.
What are the features of the PYLE PLCMRV77WP?
The PYLE PLCMRV77WP includes the following features: 1080p HD Quality, All View Angle IPS TFT LCD Panel, 2.4G Digital Wireless Transmit Solution, Wireless Transmit Range at About 300M, Camera With Microphone for Sound Wireless Transmit, Monitor Have Sound Mute Operation Button, Camera With License Plate, Easy Operation & Installation on Vehicles, and Single Cam View: Displays Picture from (1) Camera.
What is included in the box for the PYLE PLCMRV77WP?
The PYLE PLCMRV77WP box includes: a 7-inch Display Monitor, a Waterproof Camera, a Power & Wiring Harness, and a Sun Visor Monitor Hood.
How do I mount the monitor for the PYLE PLCMRV77WP?
To mount the monitor, follow these steps: First, find and take out the U shape bracket and Monitor from the box. Second, install the U shape Bracket on the dashboard of the vehicle. Third, put the Monitor onto the U shape Bracket and install the screws. Finally, adjust the best angle to allow optimum driver viewing comfort.
How do I pair the PYLE PLCMRV77WP monitor and camera if they are not already paired?
Normally, the monitor is paired with a backup camera before leaving the factory. If the PYLE PLCMRV77WP is not paired, simply press the monitor and camera pair button to match them.
How can I mute the sound on the PYLE PLCMRV77WP?
The wireless camera with microphone can transmit sound. If you want to mute the sound on the PYLE PLCMRV77WP, simply press and hold the monitor pair button.
What are the specifications for the PYLE PLCMRV77WP monitor?
The PYLE PLCMRV77WP monitor specifications are:
Panel: 7-inch Digital Panel Screen (IPS panel, Full Angle of View)
Resolution: 800*480
Power: DC12V & DC24V (MAX. to 36V)
Power Consumption: Less than 5W
Max. Current: Less 450mA
Storage temperature: -30°C to 80°C (22°F to 176°F)
Working temperature: -20°C to 70°C (-4°F to 158°F)
With Sound control button and built-in speaker
Operating frequency range: 2.4GHz to 2.4835GHz
Output Power: 17±1dBm (20dBm max)
Modulation Type: FSK/GFSK
RX Sensitivity: -89dBm (Typ.) @4MHz BER<1E-3
RF Bit Rate: 4MHz BER<1E-3
Spread Spectrum: FHSS
Distance: Over 984 ft.
What are the specifications for the PYLE PLCMRV77WP camera?
The PYLE PLCMRV77WP camera specifications are:
Image Sensor: 1/3 sensor
Effective Pixels: 720×576 pixel
System: AHD
Night vision visible distance: about 3 meters
IR Night Vision: with IR
Power: DC 12V & 24V
Power Consumption: Less than 5W
Max. Current: Less 450mA
Storage temperature: -30°C to 80°C (22°F to 176°F)
Working temperature: -20°C to 70°C (-4°F to 158°F)
Sound: With Microphone Built-in
Operating frequency range: 2.4GHz to 2.4835GHz
Output Power: 17±1dBm (20dBm max)
Modulation Type: FSK/GFSK
RX Sensitivity: -89dBm (Typ.) @4MHz BER<1E-3
RF Bit Rate: 4MHz BER<1E-3
Spread Spectrum: FHSS
Distance: Over 984 ft.
What are the button functions on the PYLE PLCMRV77WP?
The button functions for the PYLE PLCMRV77WP are as follows:
1. Pair Button (Press and hold to mute sound)
2. Distance Scale Line On/Off
3. Picture Reverse
4. Brightness +
5. Brightness –
6. Power
7. Camera Pair Button
CLICK HERE TO DOWNLOAD PYLE PLCMRV77WP (01) PDF DOCUMENT