Free English PYLE PRMC820 (01) PDF document. Download the PDF, use the online viewer, or browse the FAQs for easy troubleshooting.
CLICK HERE TO DOWNLOAD PYLE PRMC820 (01) PDF DOCUMENT
If this is not the document you want for this product, click here to see if we have any other documents for this product.
How to use the PDF below:
* Touchscreen: Swipe up/down with-in the PDF to scroll and pinch or spread with two fingers to zoom.
* Mouse: While your mouse is hovering over the PDF, use the mouse wheel to scroll and click on the – / + buttons at the bottom of the PDF to zoom.
What are the functions of the RESTART key on the PYLE PRMC820?
The RESTART key on the PYLE PRMC820 is used to start counting operations in the following cases:
a. To resume counting after an error is cleared.
b. To clear the displayed counted number.
c. Press to start counting.
How do the UV, MG, and IR keys work on the PYLE PRMC820?
UV KEY: Press the CF key, then press this key. The machine will stop in case a counterfeit note is detected. Without UV or unconspicuous speciality.
MG KEY: Press the CF key, then press this key. The machine will stop in case a counterfeit note is detected. Without MG or unconspicuous speciality.
IR KEY: Press the CF key, then press this key. The machine will stop in case a chain note is detected.
What is the function of the DD KEY on the PYLE PRMC820?
By pressing the DD key on the PYLE PRMC820, the size of the first counted note is memorized. In case a smaller or larger size note is detected, the machine will stop.
How do I turn on the counterfeit detect function using the CF KEY on the PYLE PRMC820?
Press the CF key to turn on the counterfeit detect function. After pressing CF, you can press the UV, MG, IR, or DD keys to turn on or off the specific function you want.
What does the BATCH KEY do on the PYLE PRMC820?
Every time the BATCH key is pressed, one of the preset batch amounts (10, 20, 25, 50, 100, and infinity) will be displayed and selected by rotation on the Batch Number Display.
How do I switch between manual and automatic counting on the PYLE PRMC820?
Press the CF key, then press the AUTO KEY to switch between Manual or Automatic counting functions.
How do I use the ADD function on the PYLE PRMC820?
To add counted numbers one after another, press the ADD Key to activate the ADD function. This will make the addition lamp light up.
How do I select the counting speed on the PYLE PRMC820?
Counting speed is selected by pressing the SPEED KEY. Every time this key is pressed, one of the preset rates (600, 1000, 1200, 1900 notes/min) will be displayed by rotation on the Counting Number Display.
What precaution should I take when switching on the PYLE PRMC820?
“0” will be displayed on the Counted Number Display. When the lamp of the machine is set to the AUTO position, a proper threshold is set automatically. When dirty notes are mixed, do not use the AUTO position as there is a possibility that the detection function does not work correctly.
How do I set an optional batch number on the PYLE PRMC820?
Set the batch number by pressing the BATCH Key. Every time this is pressed, one of the preset values (10, 20, 25, 50, 100, or infinity) will be displayed by rotation on the Batch Number Display. Counting operation will stop when the counting number reaches the set batch number. Any optional batch number (1-999) other than the preset values can be set by pressing the Ten Keys Pad.
How does the Different Denomination (DD) detection function work on the PYLE PRMC820?
Through this function, the size of the first counted note is memorized. If a note whose size is different from the memorized value is detected, the machine will stop.
1. Press the DD key to set the “DD detection function” (DD lamp will be lit).
2. Difference between note sizes of different dimensions is detected by checking the width of each note to be counted. The machine is set up so that it can detect notes of different dimensions when the size difference is 5mm or more.
3. When the machine stops after detecting a different dimensions note, remove the detected one from the Stacker and press the RESTART KEY to restart counting.
How can I adjust the size dimension settings for the DD function on the PYLE PRMC820?
The size of dimensions can be adjusted. Press the “DD” Button for 3 seconds, the batch display will show the current size “DXX” then press the numeric Key to choose the desired size (range from 0-9). After choosing the size, press the “RESTART” button to confirm.
How do I clear the memory of dimensions for the DD function on the PYLE PRMC820?
In case the Addition Lamp is not lit: Remove the notes from the Stacker. The memorized value will be cleared when the number on the Counting number Display becomes “0”.
In case the Addition Lamp is lit: Remove the notes from the Hopper and Stacker, and press the “RESTART” KEY; memory will be cleared with the indication on the counting Number Display at “0”.
How do I activate and adjust the UV (ultraviolet) detection function on the PYLE PRMC820?
This function is available for the model with UV detection and is used to check most banknotes which contain UV features.
When the machine stops and sounds after detecting a counterfeit note, the display will show the message “A” and the UV indicator will blink. The dubious bill will always be the last one on the stacker. Remove the detected note from the Stacker and recount all the other notes in the Stacker.
The sensitivity of UV detection can be adjusted. Press “UV” button for 3 seconds. The batch display will show the current sensitivity level “AXX”. Then press a numeric Key to choose the desired sensitivity level (range from 0-9). After choosing the level, press “RESTART” button to confirm.
How do I activate and adjust the MG (magnetic) detection function on the PYLE PRMC820?
This function is available for the model with UV & MG detection and is used to check most banknotes which contain MG features.
When the machine stops and sounds after detecting a counterfeit note, the display will show the message “b” and the MG indicator will blink. The dubious bill will always be the last one on the stacker. Remove the detected note from the Stacker and recount all the other notes in the Stacker.
The sensitivity of MG detection can be adjusted. Press “MG” button for 3 seconds. The batch display will show the current sensitivity level “BXX”. Then press a numeric Key to choose the desired sensitivity level (range from 0-9). After choosing the level, press “RESTART” button to confirm.
How do I activate and adjust the IR (infra-red) detection function on the PYLE PRMC820?
This function is available for the model with UV&MG&IR detection.
When the machine stops and sounds after detecting a counterfeit note, the display will show the message “db” and the IR indicator will blink. The dubious bill will always be the last one on the stacker. Remove the detected note from the Stacker and recount all the other notes in the Stacker.
The sensitivity of IR detection can be adjusted. Press “IR” button for 3 seconds. The batch display will show the current sensitivity level “rXX”. Then press a numeric Key to choose the desired sensitivity level (range from 0-9). After choosing the level, press “RESTART” button to confirm.
How does the Double-notes detection function work on the PYLE PRMC820?
This function is used to check all kinds of banknotes with double notes problems. By default, serving as a supplementary function, this detection can be activated when the unit is powered up.
When the machine stops and the alarm sounds after detecting a double-note bill, the display will show the message “Ed”. The double-note bill will always be the last one on the stacker. Remove the detected note from the Stacker and press “RESTART” button to continue.
How does the Half-note detection function work on the PYLE PRMC820?
This function is used to check half-note of all the banknotes. By default, serving as a supplementary function, this detection can be activated when the unit is powered up.
When the machine stops and the alarm sounds after detecting a half-note bill, the display will show the message “EH”. The half-note bill will always be the last one on the stacker. Remove the detected note from the Stacker and recount all the other notes in the Stacker, press “RESTART” button to continue.
How does the Chained-note detection function work on the PYLE PRMC820?
This function is used to check chained-note of all banknotes. By default, serving as a supplementary function, this detection can be activated when the unit is powered up.
When the machine stops and alarm sounds after detecting a chained-note bill, the display will show the message “EC”. The chained-note will always be the last one on the stacker. Remove the detected note from the Stacker and recount all the other notes in the stacker, press “RESTART” button to continue.
What are the error messages and solutions related to detection systems on the PYLE PRMC820?
| Message | Error | Solution |
|---|---|---|
| A0 (A) | Suspicious bill detected by UV system; Problem in the UV system | Remove the last bill from the stacker, press “RSTART” to continue; lower the UV sensitivity. |
| A1 (A) | Suspicious bill detected by UV system; Problem in the UV system | Remove the bill before last from the stacker, press “RSTART” to continue; lower the UV sensitivity. |
| b (b) | Suspicious bill detected by MG system; Problem in the MG system | Remove the suspicious bill from the stacker, press “RESTART” to continue; Lower the MG sensitivity |
| r (r) | Suspicious bill detected by IR system; Problem in the IR system | Remove the suspicious bill from the stacker, press “RESTART” to continue; Lower the IR sensitivity |
What do the general troubleshooting error codes mean on the PYLE PRMC820?
| Error code | Type of error | Cause of error | Procedure for removing the cause of the error |
|---|---|---|---|
| EJ (EJ) | Jam | A note is jammed in the machine | 1. Remove notes from in the Hopper 2. Set all the removed notes into the Hopper again. 3. Restart counting operation by pressing the “RESTART” key. |
| Ed (Ed) | Double note detection | Abnormal notes in mixed in the bundle of notes to be counted. | Check all the notes on the Hopper. then set them again Press the “RESTART” key toStart counting operation. |
| Eh (EH) | Half note detection | ||
| EC (EC) | Chained note detection | ||
| St (St) | Note is in the Stacker | Note(s) is remains in the Stacker. | Remove the note(s) left in the stacker. |
What do the sensor and detection error codes mean on the PYLE PRMC820?
| Error code | Type of error | Cause of error | Procedure for removing the cause of the error |
|---|---|---|---|
| dd0 | DD notes detection | Different size notes are mixed. | Check the last note in the Stacker. |
| Abnormal notes are mixed | Check all notes in the Stacker, and then set them again. | ||
| dd1 | DD notes detection | Different size notes are mixed. | Check the note before last in the stacker |
| Abnormal notes are mixed | Check all the notes in the stacker, and then set them again. | ||
| EA3 (EA3) | Problem with speed sensor | Problem with speed sensor | Clean the sensor or replace it |
| EAr (EAr) | Problem with the right counting sensor | Problem with right counting sensor | Clean the sensor or replace it |
| EAl (EAl) | Problem with the left counting sensor | Problem with left counting sensor | Clean the sensor or replace it |
CAUTION: In case that many “dd” errors happen, remove all notes from the Hopper and Stacker, and make sure the condition of notes (holes, tear, fold, etc.) Then align and set notes again.
How should I set the bank notes in the PYLE PRMC820 to avoid errors?
Precautions related to proper setting of bank notes to be counted:
– Damp and/or badly stained notes should be avoided.
– Check that no foreign matter (piece of paper, paper clip, dust, etc.) is mixed in with bundle of notes.
– Folded or curled notes should be straightened before they are set in the Hopper.
– For brick notes (bundle of new notes which are stuck to each other by ink). Bend and flex the stack before it is set on the Hopper.
How do I align notes for counting on the PYLE PRMC820?
Align the long and short edges of the notes by lightly tapping the stack; Insufficient alignment may cause an operation error.
How do I perform daily cleaning on the PYLE PRMC820?
Sensors are used for the counting system of this machine. As these sensors are of optical construction, the system may cause miscounting should dust, dirt, etc. stick to the sensors. Clean the sensors with an accessory brush when counting operation is finished. This includes the length sensor, counting sensor, auto start sensor, and preset sensor.
Pieces of paper, dust and/or trash etc. accumulated in the Hopper and/or stacker may be taken into the machine; this may cause a malfunction of the machine. Clean the Hopper and Stacker in the same way as above.
What are the specifications of the PYLE PRMC820?
Dimensions: 242mm x 276mm x 245mm
Net Weight: 4.9kgs/pc
Gross Weight: 6.75kgs/pc
Size of countable note: 50mm x 110mm ~ 90mm x 190mm
Counting speed: 1900, 1200, 1000, 600 pcs/min. (Four step system)
Feed system: Roller friction system
Hopper capacity: 300 sheets
Stacker capacity: 200 sheets
Counting number display: 5 Digital LCD
Power source: AC100~240V 50/60Hz
Power consumption: 60W(max)
What safety cautions should be observed when using the PYLE PRMC820?
To use this machine safely:
– Avoid operation under direct sunlight.
– Don’t press the operation-keys with a pointed tip of pencil or anything pointed.
– Don’t make multi wiring from one socket.
– Three-prong plug which can be grounded to the building ground should be used for power supply.
– Use the power cable attached to the machine as accessories.
– Unplug the machine before it is moved.
– Don’t place tools, fingers, hair, loose clothing, etc. near any moving part.
– Don’t spill drink etc. on the machine.
– For maintenance, use specified parts; don’t make improper maintenance.
– Clean the machine after turning off the power switch.
– Do not use chemicals for cleaning the machine.
CLICK HERE TO DOWNLOAD PYLE PRMC820 (01) PDF DOCUMENT