Free English PYLE BLUE TECH PBT55D (01) PDF document. Download the PDF, use the online viewer, or browse the FAQs for easy troubleshooting.
CLICK HERE TO DOWNLOAD PYLE BLUE TECH PBT55D (01) PDF DOCUMENT
If this is not the document you want for this product, click here to see if we have any other documents for this product.
How to use the PDF below:
* Touchscreen: Swipe up/down with-in the PDF to scroll and pinch or spread with two fingers to zoom.
* Mouse: While your mouse is hovering over the PDF, use the mouse wheel to scroll and click on the – / + buttons at the bottom of the PDF to zoom.
How do I open and wear the PYLE BLUE TECH PBT55D?
First, unfold the folded headset until they are fully extended to the opened position. Second, rotate the earcups until they are in the locked position. Finally, wear the headset with the headband behind your head and adjust the position until you feel the most comfort.
How do I charge the battery of the PYLE BLUE TECH PBT55D?
Before first time use, it is important to charge the battery for 6 hours. During recharging, the LED shows a steady red light. When the battery is fully charged, the red LED is off. You can use the provided AC adaptor or connect the USB charging cable to a computer USB port providing 500 mA.
How can I tell if the battery of the PYLE BLUE TECH PBT55D is low?
When the battery is low, the LED of the headset or the audio adaptor will flash red instead of green. When the battery level is too low, the device will automatically power off.
How do I turn the PYLE BLUE TECH PBT55D headset or audio adaptor on and off?
To turn the device on, press and hold the button until the LED flashes green. To turn the device off, press and hold the button until the LED turns red and then turns off.
How do I pair the PYLE BLUE TECH PBT55D with a Bluetooth mobile phone?
While the headset is powered off, press and hold the button for 4 seconds until the LED flashes red and green alternately to indicate it is in pairing mode. Use your mobile phone to search for new Bluetooth devices. When the phone finds the name “PBT55D”, select it and enter the passkey “0000”.
How do I answer, reject, or end calls on the PYLE BLUE TECH PBT55D?
When an incoming call is present, press the play button to answer or press the designated button to reject the call. To end a call that is in session, press the button. If the headset is connected to another transmitter like the audio adaptor, press the stop button to end the call.
How do I use the last number redial feature on the PYLE BLUE TECH PBT55D?
While the headset is in standby mode, press and hold the button for 2 seconds to redial the last dialed number. If the headset is connected to another transmitter simultaneously, press and hold the button for 2 seconds to perform the redial.
How do I adjust the speaker volume on the PYLE BLUE TECH PBT55D?
While a call is in session or while playing music, press and release the VOL+ or VOL- buttons to adjust the speaker volume.
How do I activate voice dialing on the PYLE BLUE TECH PBT55D?
When in standby mode, press and hold the button for 2 seconds until a long beep is heard. The headset will then connect to your mobile phone for the voice dialing function. If playing music, you can continuously press the button until a long beep is heard to stop music and initiate the voice dialing function.
How do I transfer a call to my mobile phone from the PYLE BLUE TECH PBT55D?
If the mobile phone is enabled with the hands-free profile, press the button while the call is in session to transfer it to your mobile phone.
What are the accessories included with the PYLE BLUE TECH PBT55D?
The following table lists the accessories for the device:
| Description | Status |
|---|---|
| A/C Switching Adaptor | Provided |
| USB Charging cable | Optional |
CLICK HERE TO DOWNLOAD PYLE BLUE TECH PBT55D (01) PDF DOCUMENT