PYLE PSBVSUB20 (01) PDF Document

The key features of the PYLE PSBVSUB20 include:

LED display

Digital Amplifier with DSP Inside

Designed to Sit Under Your Television

Home Theater Tabletop TV Stand Mount

Powerful and Compact Speaker Sound Bar System

Built-in BT for Instant Wireless Music Streaming

Works with All of Your Favorite BT-Enabled Devices (iPhone, Smartphone, iPod, MP3 Player, iPad, Tablet, PC, etc.)

Digital Optical Audio Connector Jacks, USB Port, HDMI/ARC, COAX

System Doubles as TV Speaker Base Entertainment System

Ported Tube Design for Extended Bass Performance

Full-Range Audio Spectrum Stereo Sound Reproduction

Convenient Source Selection with LED Indicators

Easy Touch Button Audio Select Control Center

Aux (3.5mm) Input Connector Jack

Easy-to-Use and Easy-to-Setup

The technical specifications for the PYLE PSBVSUB20 are:

RMS Power Output: 30 Watt (15 x 2) + 60-Watt x 1

Audio Output: 2.1CH

Wireless BT Version: 5.0

Wireless BT Range: 50 Feet

Speaker Impedance: 8Ω x 2 + 4Ω x 1

Inputs: 3.5mm (AUX), Digital Optical Audio Connector Jacks, USB Port, HDMI/ARC, COAX

Power Supply: Soundbar: AC100-240V~50/60Hz, DC22V/2A

Subwoofer: AC100-240V~50/60Hz

Frequency Response: 45Hz – 20kHz (+/- 6dB)

Input Sensitivity: 450mV

S/N: 63dB

THD: 1%

Soundbar Dimensions: 34.84 ” x 3.39″ x 2.20″ -inches

Subwoofer Dimensions: 4.72″ x 8.66″ x 15.75″ -inches

The box for the PYLE PSBVSUB20 contains:

2.1 TV Soundbar

Audio Connection Cables

Remote Control

Optical Cable

22V/2A Power Adapter

Power Cable

Important safety instructions include:

Read these instructions.

Keep these instructions.

Heed all warnings.

Follow all instructions.

Do not use this apparatus near water.

Clean only with dry cloth.

Do not block any ventilation openings. Install in accordance with the manufacturer’s instructions.

Do not install near any heat sources such as radiators, heat registers, stoves, or other apparatus (including amplifiers) that produce heat.

Do not defeat the safety purpose of the polarized or grounding-type plug. A polarized plug has two blades with one wider than the other. A grounding type plug has two blades and a third grounding prong. The wide blade or the third prong are provided for your safety. If the provided plug does not fit into your outlet, consult an electrician for replacement of the obsolete outlet.

Protect the power cord from being walked on or pinched particularly at plugs, convenience receptacles, and the point where they exit from the apparatus.

Only use attachments/accessories specified by the manufacturer.

Unplug this apparatus during lightning storms or when unused for long periods of time.

Refer all servicing to qualified service personnel. Servicing is required when the apparatus has been damaged in any way, such as power-supply cord or plug is damaged, liquid has been spilled or objects have fallen into the apparatus, the apparatus has been exposed to rain or moisture, does not operate normally, or has been dropped.

To reduce the risk of fire or electric shock, do not expose this device to rain, moisture, dripping, or splashing, and no objects filled with liquids, such as vases, shall be placed on it.

Placement guidelines for the PYLE PSBVSUB20 are:

Some older TVs and computer monitors are magnetically sensitive devices and as such are likely to suffer discoloration or picture distortion when conventional speakers are placed nearby. If discoloration problems persist, try moving the soundbar away from your TV or monitor.

Sensitive to extreme temperatures and humidity. Do not put it in locations subject to direct sunlight or in humid places, such as near an air conditioner, humidifier, bathroom, or kitchen.

Do not put water or other liquids close to the soundbar. If liquid is spilled over the soundbar, it may be damaged.

The soundbar should be placed on a sturdy, flat surface that is free from vibration, or mounted on a wall. Do not put the soundbar on an uneven or unstable surface, where it may fall and cause damage.

The function descriptions for the buttons on the PYLE PSBVSUB20 soundbar are:

1. Play/Pause the music

2. Power: Press and hold to switch ON/OFF the sound bar. Mode: Short press to change between modes AUX IN/OPTICAL/BT/COAX.

3. VOL-/PREV: Press and hold to decrease the volume, and press to skip to previous track.

4. VOL+/PREV: Press and hold to increase the volume, and press to skip to next track.

The physical ports on the PYLE PSBVSUB20 soundbar are:

5. Optical Port.

6. COAX Port.

7. HDMI (arc) In Port.

8. USB Port.

9. AUX in Port.

10. DC In Port.

Note: The RC sensor is at the front of the sound bar.

The remote control functions for the PYLE PSBVSUB20 are:

1. Power: Switch ON/OFF the sound bar.

2. PAIR: Connects/disconnects Wireless BT

3. VOL +

4. Previous track

5. VOL –

6. TREB – : Reduce the amount of treble.

7. BASS – : Reduce the amount of bass.

8. Mute

9. INPUT: Input signal mode conversion.

10. Next track

11. Play/Pause

12. TREB + : Increase the amount of treble.

13. EQ: Equalizer button.

14. BASS +: Increase the amount of bass.

To connect the subwoofer to the soundbar of the PYLE PSBVSUB20 using Wireless BT Technology:

1. Plug power cable to subwoofer, red LED keeps flashing. Plug the DC port of the 22V/2A adapter into the sound bar, the display says “–“.

2. Press and hold the “O/M” key for 2 seconds, then release it. After 3 seconds, it will automatically enter BT mode with sound alerts. The LED displays “BT” and keeps flashing.

3. Press and hold the “►II” key for 3 seconds.

You will hear the sound “Left Channel”, “Right Channel” which means the bar and subwoofer is successfully connected by wireless BT. Now You can play music by USB, AUX, BT etc.

For the second time turning ON the subwoofer and soundbar:

Press the “O/M” key for 2 seconds and then release it.

After 10 seconds, you will hear the sound “Left Channel”, “Right Channel”. Sound bar will automatically connect to subwoofer.

To establish a Wireless BT Connection with the PYLE PSBVSUB20:

1. Put the sound bar near the BT device, iPhone, Smartphone, iPod, MP3 Player, iPad, Tablet, PC, etc.

2. Turn ON the BT function of the device, search for “Pyle”. Connect to it once found. If code is needed, press “0000”. An alert will appear when connected, and the The LED display BT lights up and stops flashing.

3. The sound bar will automatically reconnect to the last paired device when switched ON, If it doesn’t connect, the sound bar will enter pairing mode.

To use the OPTICAL FUNCTION on the PYLE PSBVSUB20:

1. Plug the optical cable into the optical port and the other side to TV or other device with optical/digital port.

2. Short press “O/M” into optical mode, LED lights (white) will light indicating “OP”, music will start playing.

To use the COAX FUNCTION on the PYLE PSBVSUB20:

1. Plug the COAX cable into the COAX port and the other side to your TV or other device with COAX/digital port.

2. Short press “O/M” key into “COAX” mode, LED lights (white) indicating “CO”, music will start playing.

To use the AUX IN FUNCTION on the PYLE PSBVSUB20:

1. Put the 3.5mm cable into the AUX-in port and the other side into the mobile device.

2. Short press “O/M” into “AU IN” mode, with indication of AU.

3. Hold the “VOL-/PREV” on the sound bar to decrease the volume.

4. Hold the “VOL+/NEXT” on the sound bar to increase the volume.

To use the USB FUNCTION on the PYLE PSBVSUB20:

1. Directly insert the USB card.

2. Press “►II” on Soundbar or “►/II” on remote control to play/pause.

3. Press “I/◄◄/V-” or “I/►►/V+” or “I/◄◄◄/I” to go to previous/next song.

For ARC IN FUNCTION on the PYLE PSBVSUB20, use a Connection with HDMI (ARC) cable, e.g. to the HDMI ARC connection of the television set, DVD player.