Free English PYLE PDISTPDL54 (01) PDF document. Download the PDF, use the online viewer, or browse the FAQs for easy troubleshooting.
CLICK HERE TO DOWNLOAD PYLE PDISTPDL54 (01) PDF DOCUMENT
If this is not the document you want for this product, click here to see if we have any other documents for this product.
How to use the PDF below:
* Touchscreen: Swipe up/down with-in the PDF to scroll and pinch or spread with two fingers to zoom.
* Mouse: While your mouse is hovering over the PDF, use the mouse wheel to scroll and click on the – / + buttons at the bottom of the PDF to zoom.
What are the main features of the PYLE PDISTPDL54 Heavy Metal Guitar Distortion Pedal?
The PYLE PDISTPDL54 includes the following features:
- 2 Modes: Extreme and Classic
- Easy Control
- Volume Knob: Adjust the volume
- Contour Knob: Adjust the tone
- Optimal Circuit Design
- High-Quality Electronic Components and Circuit Design
- Reliable Aluminum Alloy Casing
- LED Indicator shows the Working State
What is included in the box with the PYLE PDISTPDL54 Heavy Metal Guitar Distortion Pedal?
What’s in the Box:
- Effect Pedal
- Adapter
- Velcro
What are the technical specifications for the PYLE PDISTPDL54 Heavy Metal Guitar Distortion Pedal?
Technical Specs:
- Construction Material: Metal
- Delay Time: 20ms-300ms
- Input Impedance: 1M Ohms
- Output Impedance: 470 Ohms
- Power Supply: AC Adapter 9V DC
- Current Draw: 20mA
- Input & Output Jack: 1/4″ Mono Audio Jack
- Product Dimensions: 3.7″ x 1.7″ x 1.9″ -inches
How do I use the DC IN on the PYLE PDISTPDL54?
Use a 9-volt DC regulated AC adapter (plug polarity is positive on the barrel and negative in the center).
What is the function of the MODE Switch on the PYLE PDISTPDL54?
The MODE Switch allows you to switch between Classic mode and Extreme mode.
How do I adjust the tone color on the PYLE PDISTPDL54?
Adjust the tone color using the CONTOUR Knob.
What is the purpose of the VOLUME Knob on the PYLE PDISTPDL54?
The VOLUME Knob is used to adjust the volume.
What is the purpose of the DIST Knob on the PYLE PDISTPDL54?
The DIST Knob is used to adjust the gain.
What is the OUTPUT Jack used for on the PYLE PDISTPDL54?
The OUTPUT Jack is a 1/4″ mono audio jack used for signal output.
What is the INPUT Jack used for on the PYLE PDISTPDL54?
The INPUT Jack is a 1/4″ mono audio jack used for connecting a guitar.
What does the ON/OFF LED indicate on the PYLE PDISTPDL54?
The ON/OFF LED indicates the effects or bypass status of the PYLE PDISTPDL54. When the LED is lit up, the effect is on.
How do I use the True Bypass Footswitch on the PYLE PDISTPDL54?
Push down the footswitch to switch between effects and bypass status.
What is the purpose of the lever next to the footswitch on the PYLE PDISTPDL54?
The lever is designed to prevent stamping on operation knobs.
CLICK HERE TO DOWNLOAD PYLE PDISTPDL54 (01) PDF DOCUMENT