DYSON PURIFIER HOT+COOL (HOTPLUSCOOL) HP2 DE-NOX (01) PDF Document

To assemble your DYSON PURIFIER HOT+COOL (HOTPLUSCOOL) HP2 DE-NOX, please follow these steps:

1. Use both hands to lift your machine out of the box by its base. Do not lift it out by the loop amplifier.

2. Your machine is supplied with a permanent catalytic filter and a HEPA+K-Carbon filter. You will not need to change the catalytic filter.

3. Push the catalytic filter into position on the machine.

4. Push the HEPA+K-Carbon filter into the outer cover and position it on the base.

5. Push firmly until both outer covers click into place.

Place the remote control on top of the machine with the buttons facing down. Plug in and switch on the machine.

The remote control for your DYSON PURIFIER HOT+COOL (HOTPLUSCOOL) HP2 DE-NOX has the following functions:

Standby on/off: Turns the machine on or off.

Information menu: Scrolls through the information being monitored by the machine.

Airflow speed: Increases or decreases the airflow speed.

Heating control: Sets the required room temperature in heating mode.

Auto mode: Activates Auto mode, where the machine intelligently adjusts settings based on air quality.

Cooling mode: Switches the machine to cooling mode.

Oscillation on/off: Starts or stops the machine from oscillating.

Airflow direction: Changes the direction of airflow from front to back.

Sleep timer: Sets a timer for the machine to automatically turn off.

Night mode: Activates Night mode for quieter operation with a dimmed screen.

To connect your DYSON PURIFIER HOT+COOL (HOTPLUSCOOL) HP2 DE-NOX to the MyDyson™ app, first download the app. Then, open the app and follow the on-screen instructions to create a new account and set up your machine. The app allows for full control, step-by-step setup and support, monitoring of air quality, and access to the latest software updates.

You can control your DYSON PURIFIER HOT+COOL (HOTPLUSCOOL) HP2 DE-NOX using various smart home assistants:

Using Amazon Alexa: Ask Alexa to enable the Dyson skill to control your purifier. You can also set a routine that automates how your machine works with other devices in your home.

Using Google Assistant: Control all of your connected purifiers with Google. You can set a routine to automate how your machine works with other devices in your home. Just say “Hey Google” to get started.

Using Siri: Connect your Dyson machines to Siri Shortcuts to control them with your voice on your Apple device.

Press the Standby on/off button on your DYSON PURIFIER HOT+COOL (HOTPLUSCOOL) HP2 DE-NOX or the remote control to stop your machine. It will continue to monitor the air quality while in standby mode.

Continuous monitoring is turned off by default. When turned on, your DYSON PURIFIER HOT+COOL (HOTPLUSCOOL) HP2 DE-NOX will gather air quality, temperature, and humidity information, which is displayed on the LCD screen and in the MyDyson™ app. This feature remains active until you turn it off again.

To turn continuous monitoring on, press and hold the Auto mode button on the remote control for five seconds. The LCD screen will indicate when continuous monitoring is on or off.

Wi-Fi is on by default on your DYSON PURIFIER HOT+COOL (HOTPLUSCOOL) HP2 DE-NOX. To turn the Wi-Fi on or off, press and hold the Standby on/off button on your machine for five seconds.

Press the Information menu button on the remote to scroll through the information being monitored by your DYSON PURIFIER HOT+COOL (HOTPLUSCOOL) HP2 DE-NOX. The LCD screen displays the following:

Indoor air quality – 12 seconds: A graph showing the last 12 seconds of air quality data.

Particulate matter (PM2.5): Microscopic particles up to 2.5 microns in size, such as smoke and allergens.

Particulate matter (PM10): Larger microscopic particles up to 10 microns in size, such as dust and pollen.

Volatile organic compounds (VOCs): Potentially harmful odours from cleaning products, paints, and furnishings.

Nitrogen dioxide and other oxidising gases: Potentially harmful gases released by combustion from cooking or vehicle exhaust.

Indoor temperature: The current ambient room temperature.

Indoor humidity: The amount of water vapor in the air, shown as a percentage.

Filters: The remaining filter life.

Formaldehyde (HCHO): A common indoor pollutant released from furnishings, floorings, and glue.

Wi-Fi: The current status of the Wi-Fi network connection.

When you set your DYSON PURIFIER HOT+COOL (HOTPLUSCOOL) HP2 DE-NOX to Auto mode, the on-board sensors will intelligently adjust the machine’s settings according to the air quality.

Air quality: Your machine will pause when the target air quality has been reached and will switch on again when the air quality levels drop.

Airflow speed: The airflow speed will increase until the target air quality and temperature have been reached.

To adjust the airflow speed, press the Airflow speed button on the remote to increase or decrease the speed.

To change the airflow direction, press the Airflow direction button to switch the airflow from front to back. For personal comfort, you can select the Fan mode for airflow from the front, which provides purifying, cooling, and heating.

Press the Oscillation button on the remote control to circulate the air around the room. You can scroll through the oscillation settings from 0° to 350°. You can also customise your oscillation setting in the MyDyson™ app.

In Night mode, your DYSON PURIFIER HOT+COOL (HOTPLUSCOOL) HP2 DE-NOX will continue to monitor and respond to changes in air quality, but it will only use its quietest settings and its LCD screen will be dimmed.

The Sleep timer will turn off your DYSON PURIFIER HOT+COOL (HOTPLUSCOOL) HP2 DE-NOX automatically after a selected amount of time.

To set the time: Press the Sleep timer button to scroll through the time options.

To check the selected time: Once activated, press the Sleep timer button once to see the time selected.

To cancel the Sleep timer: Press the Sleep timer button twice.

For heating: Press the Heating control button (red) to set the required room temperature. Your machine will pause when the set temperature has been reached.

For cooling: Press the Cooling mode button (blue) to switch your machine from heating mode to cooling mode.

Before changing your filter, switch off and unplug your DYSON PURIFIER HOT+COOL (HOTPLUSCOOL) HP2 DE-NOX. The remaining filter life is displayed on the screen and will indicate when your non-washable filters need replacing. Your machine comes with a permanent catalytic filter that you won’t need to change.

1. To change your HEPA+K-Carbon filter, push down on the buttons on either side of your machine to release the outer cover.

2. Push down on the tabs to remove the filter.

3. Push the replacement filter into the outer cover and make sure the tabs click into place.

4. Put the outer covers into position on your machine and push firmly until they both click securely into position.

5. Plug in and switch your machine on, and then reset your filter life.

It is important to reset your filter life after you have replaced the filter. To reset the HEPA+K-Carbon filter life on your DYSON PURIFIER HOT+COOL (HOTPLUSCOOL) HP2 DE-NOX, press and hold the Night mode button on your remote control. The display on your machine will countdown from five, the filter life will be reset, and your machine will be ready to use.

To get the best performance from your DYSON PURIFIER HOT+COOL (HOTPLUSCOOL) HP2 DE-NOX, it is important to regularly clean it and check for blockages.

Cleaning your machine: If your machine is dusty, wipe it with a damp lint-free cloth. Do not use detergents or polishes to clean your machine.

Checking for blockages: Look for blockages in the air inlet holes on the filter and the small aperture inside the loop amplifier. Use a soft brush to remove any dust and debris.

If your DYSON PURIFIER HOT+COOL (HOTPLUSCOOL) HP2 DE-NOX shows an error code, try turning it off and then on again.