DYSON PURE COOL DP04 (01) PDF Document

When using your DYSON PURE COOL DP04, basic precautions should always be followed. These warnings apply to the appliance, and also where applicable, to all tools, accessories, chargers or mains adaptors.

TO REDUCE THE RISK OF FIRE, ELECTRIC SHOCK, OR INJURY:

1. This Dyson appliance can be used by children aged from 8 years and above and persons with reduced physical, sensory or reasoning capabilities, or lack of experience and knowledge, only if they have been given supervision or instruction by a responsible person concerning use of the appliance in a safe way and understand the hazards involved. Cleaning and user maintenance should not be performed by children without supervision.

2. Ensure that the appliance is fully assembled in line with the instructions before use.

3. Do not allow to be used as a toy. Close attention is necessary when used by or near children. Children should be supervised to ensure that they do not play with the appliance.

4. Use only as described in this Dyson Operating Manual. Do not carry out any maintenance other than that shown in this manual.

5. Suitable for dry location ONLY. Do not use outdoors or on wet surfaces and do not expose to water or rain.

6. Do not handle any part of the plug or appliance with wet hands.

7. Do not operate any appliance with a damaged cable or plug. If the supply cable is damaged it must be replaced by Dyson, its service agent or similarly qualified person in order to avoid a hazard.

8. If the appliance is not working as it should, has received a sharp blow, has been dropped, damaged, left outdoors, or dropped into water, do not use it.

9. Do not stretch the cable or place the cable under strain. Keep cable away from heated surfaces.

10. Do not route the cable under furniture or appliances. Do not cover cable with throw rugs, runners or similar coverings. Arrange cable away from traffic area and where it will not be tripped over.

11. Do not unplug by pulling on the cable. To unplug, grasp the plug, not the cable. The use of an extension cable is not recommended.

12. Do not put any object into openings or the inlet grille. Do not use with any opening blocked; keep free of dust, lint, hair, and anything that may reduce airflow.

13. Do not use any cleaning agents or lubricants on this appliance. Unplug before cleaning or carrying out any maintenance.

14. Always carry the appliance by the base, do not carry it by the loop amplifier.

15. Turn off all controls before unplugging. Unplug from socket when not in use for extended periods. To avoid a tripping hazard, safely coil the cable.

16. Do not use near furnaces, fireplaces, stoves or other high temperature heat sources.

17. Do not use in conjunction with or directly next to an air freshener or similar products. Do not spray or apply perfumes directly on or near the filter. Keep essential oils and chemicals away from the appliance.

18. WARNING: Chemical Burn and Choking Hazard. Keep batteries away from children. This product contains a lithium button/coin cell battery. If a new or used lithium button/coin cell battery is swallowed or enters the body, it can cause severe internal burns and can lead to death in as little as 2 hours. Always completely secure the battery compartment. If the battery compartment does not close securely, stop using the product, remove the batteries, and keep it away from children. If you think batteries might have been swallowed or placed inside any part of the body, seek immediate medical attention.

19. This appliance is only to be used with the power supply unit provided with it.

MAGNET WARNINGS:

The appliance and the remote control both contain magnets.

1. Pacemakers and defibrillators may be affected by strong magnetic fields. If you or someone in your household has a pacemaker or defibrillator, avoid placing the remote control in a pocket or near to the device.

2. Credit cards and electronic storage media may also be affected by magnets and should be kept away from the remote control and the top of the appliance.

USAGE CAUTIONS:

• Do not pull on the cable.

• Do not store near heat sources.

• Do not use near naked flames.

• Do not carry by the air loop amplifier. The air loop amplifier is not a handle.

• Do not spray scented products such as air freshener or perfume near the filter or the appliance.

1. Use both hands to lift the appliance out of the box, holding it by the base only. Do not lift it out by the amplifier loop.

2. Take the carbon filters out of the box, remove their protective packaging, and attach both carbon filters to the appliance.

3. Remove the glass HEPA filters from their protective packaging and push them into the shrouds until they are secure.

4. Position the shrouds onto the base and push gently until they click securely into place.

5. Place the remote control on the top of the appliance with the buttons facing down.

6. Plug in and switch on.

The DYSON PURE COOL DP04 can be operated using the remote control or the power button on the appliance itself. The remote control functions are:

• Power ON/OFF: Toggles the appliance on and off.

• Information menu: Press to scroll through the monitoring options.

• Auto mode: Activates Auto mode.

• Airflow speed: Increases or decreases the airflow speed.

• Airflow direction: Changes the direction of airflow from front to back.

• Oscillation ON/OFF: Starts and stops oscillation and scrolls through the angle options.

• Night mode: Activates Night mode.

The appliance can also be tilted manually for directional airflow.

Press the Power ON/OFF button on the appliance body or on the remote control to start or stop the purifying fan. When you stop the fan, the appliance will continue to monitor the air quality.

The continuous monitoring function is active by default unless Standby is selected. When active, it will:

• Collect extensive environmental information (viewable in the “Information menu” section).

• Allow historical air quality information to be displayed on the screen and in the Dyson Link app.

To stop continuous monitoring, press and hold the Auto mode button for 5 seconds.

When the appliance is in Standby mode, continuous monitoring is turned off. To exit standby and reactivate the appliance, press the Power ON/OFF button on the appliance or remote control.

The Dyson Link app allows you to control, schedule, monitor, and customise settings for your appliance from your mobile device.

1. Plug your appliance into the mains electricity supply and turn on the power.

2. Check your mobile device is compatible with the app, switched on, connected to a Wi-Fi network and has Bluetooth enabled.

3. If you do not already have the Dyson Link app, you will need to download it.

4. Open the Dyson Link app and follow the instructions to create a new account if you do not already have one.

5. Follow the on-screen instructions to pair your appliance to the Dyson Link app.

Wi-Fi is enabled by default. To disable or enable the Wi-Fi on the appliance, press and hold the ON/OFF button on the appliance for 5 seconds.

You can scroll through the options using the information menu button on the remote to monitor the performance of your appliance. The menu provides information about pollutants in the air, temperature, and humidity levels.

• Indoor air quality – 12 seconds: Monitors the current air quality with a graph showing the last 12 seconds of data.

• Particulate matter (PM2.5): Shows levels of microscopic particles up to 2.5 microns in size, such as smoke, bacteria and allergens.

• Particulate matter (PM10): Shows levels of larger microscopic particles up to 10 microns in size, such as dust, mould and pollen.

• Nitrogen dioxide and other oxidising gases: Shows levels of potentially harmful gases released by combustion, such as from cooking or vehicle exhaust.

• Volatile organic compounds (VOCs): Shows levels of typically odours that may be potentially harmful, found in cleaning products, paints, and new furnishings.

• Indoor temperature: Monitors the ambient temperature.

• Indoor humidity: Shows the amount of water vapour in the air, as a percentage of the maximum possible humidity at the current temperature.

• Filters: The remaining filter life is shown in the display and will indicate when either filter needs replacing.

• Wi-Fi: Shows the current status of the connection to the Wi-Fi network.

When a particular type of pollutant causes air quality to decrease, the symbol for that pollutant will show in the display.

When Auto mode is selected, the on-board sensors will intelligently adjust the settings of the DYSON PURE COOL DP04 according to the air quality. The appliance will pause once the sensors detect that the target air quality level has been reached. The sensors will continue to monitor the air quality, switching the appliance back on when air quality levels have dropped. During auto mode the appliance is more sensitive to VOCs (such as odours) than normal.

Air will be purified continuously, whether the air is set to flow from the front or the back.

• Press the Airflow speed button to increase and decrease the airflow speed from 1 to 10.

• Press the Airflow direction button to switch the airflow between the front and the back.

• For purification and cool airflow, select the airflow direction to the front.

• For purification without cool airflow from the front, select the airflow direction to the back.

Activating Night mode will dim the display and the DYSON PURE COOL DP04 will run more quietly, making it ideal for use while sleeping.

• If Auto mode has been set, Night mode will reduce airflow speeds to a range from 1 to 4.

• You can also manually change the airflow from 1-10 while in Night mode.

Press the Oscillation button on the remote control to scroll through the oscillation options from 0° to 350°. You can also customise your oscillation settings in the Dyson Link app, and it will appear as an option as you scroll through.

Important: Always unplug the appliance before changing filters. The remaining filter life is shown on the display and will indicate when the non-washable glass HEPA filter needs replacing. Dispose of used filter units in accordance with local regulations.

1. Unplug the appliance from the mains electricity supply. Slide the buttons down on both sides of the shrouds.

2. The shrouds will release with the glass HEPA filters attached.

3. Empty the glass HEPA filters directly into the bin by pushing in both the purple tabs on the shrouds.

4. Push the new glass HEPA filters into the shrouds until secure.

5. Push the shrouds until they click back into position in the base.

6. Plug the appliance in to the mains electricity supply and switch on.

7. Press and hold the Night mode button on the remote control. The display on the appliance will countdown from five, finishing with the default screen. The glass HEPA filter level will be reset and the appliance is ready to use.

Important: Always unplug the appliance before changing filters. The remaining filter life is shown in the display and will indicate when the non-washable carbon filter needs replacing. Dispose of used filter units in accordance with local regulations.

1. Unplug the appliance from the mains electricity supply. Slide the buttons down on both sides of the shrouds.

2. The shrouds will release with the glass HEPA filters attached.

3. To remove the carbon filters: pull the tabs on both sides of the filters. Dispose of the carbon filters in the bin.

4. Push the new carbon filters onto the base until secure.

5. Push the shrouds until they click back into position in the base.

6. Plug the appliance in to the mains electricity supply and switch on.

7. Press and hold the Oscillation button on the remote control. The display on the appliance will countdown from five, finishing with the default screen. The carbon filter level will be reset and the appliance is ready to use.

To ensure your appliance works efficiently, it is important to clean and check for blockages regularly. Unplug your appliance from the mains electricity supply before cleaning.

• Dust may accumulate on the surface of the machine. Wipe dust from the loop amplifier, filter unit and other parts with a dry or damp cloth.

• Look for blockages in the air inlet holes on the filter and the small aperture inside the loop amplifier.

• Use a soft brush to remove dust and debris.

• Do not use detergents or polishes to clean the appliance.

If the appliance has been used without a filter in place or the filters have not been changed when prompted, blockages may occur.

To remove a blockage:

1. Remove the filter shrouds and look for blockages in the air inlet holes under the filters.

2. Use a soft brush to remove dust and debris.

If an error code is displayed, first try unplugging the appliance and plugging it in again.

Use a CR2032 battery.

1. Unclip the battery compartment on the remote control. Loosen the base and pull to remove the battery.

2. Do not install backwards or short circuit the batteries.

3. Do not attempt to dismantle or charge the batteries. Keep away from fire.

4. Follow battery manufacturers’ instructions when installing new batteries.