DYSON PURIFIER COOL PC2 DE-NOX (01) PDF DOCUMENT

To assemble your DYSON PURIFIER COOL PC2 DE-NOX, please follow these steps:

1. Use both hands to lift your machine out of the box by its base. Do not lift it out by the loop amplifier.

2. Your machine comes with a permanent catalytic filter and a HEPA+K-Carbon filter. Push the catalytic filter into position on the machine.

3. Push the HEPA+K-Carbon filter into the outer cover and position it on the base.

4. Push firmly until both outer covers click into place.

To get started, place the remote control on top of the machine with the buttons facing down. Then, plug in and switch on the machine.

The remote control for your DYSON PURIFIER COOL PC2 DE-NOX has the following functions:

Standby on/off: Turns the machine on or off.

Information menu: Scrolls through the information being monitored by the purifier.

Auto mode: Activates Auto mode, where the machine intelligently adjusts settings based on air quality.

Airflow speed: Increases or decreases the airflow speed.

Airflow direction: Changes the direction of airflow from front to back.

Oscillation on/off: Starts or stops the machine from oscillating.

Night mode: Activates Night mode for quieter operation and a dimmed screen.

To connect your DYSON PURIFIER COOL PC2 DE-NOX to the app, first download the MyDyson™ app from the App Store or Google Play. Then, open the app and follow the on-screen instructions to create a new account and connect your machine. The app allows for full control, step-by-step setup and support, monitoring air quality, and receiving software updates.

Yes, you can connect your DYSON PURIFIER COOL PC2 DE-NOX to various smart home systems:

Using Amazon Alexa: Ask Alexa to enable the Dyson skill to control your purifier. You can also set up a routine that automates how your machine works with other devices.

Using Google Assistant: Control your connected purifier with Google. You can also set a routine to automate how your machine works with other devices in your home. Just say “Hey Google” to get started.

Using Siri: Connect your Dyson machine to Siri Shortcuts to control it with your voice on your Apple device.

Standby on/off: Press the Standby on/off button on your Dyson purifier or remote control to stop your machine. It will continue to monitor the air quality.

Continuous monitoring: This feature is turned off by default. Once turned on, it will always be active until you turn it off again. With continuous monitoring on, your purifier will gather air quality, temperature, and humidity information, which is displayed on the LCD screen and in the MyDyson™ app. To turn it on or off, press and hold the Auto mode button on the remote control for five seconds. The LCD screen will indicate when the feature is on or off.

Wi-Fi is on by default. To turn the Wi-Fi on or off, press and hold the Standby on/off button on your machine for five seconds.

Press the information button to scroll through the data monitored by your DYSON PURIFIER COOL PC2 DE-NOX. The LCD screen will show information about air quality, temperature, humidity, and filter levels. When a particular pollutant causes air quality to decrease, a symbol for that pollutant will appear on the screen. The following information is available:

Indoor air quality – 12 seconds: Shows a graph of the current air quality over the last 12 seconds.

Particulate matter (PM2.5): Measures microscopic particles up to 2.5 microns in size, such as smoke and allergens.

Particulate matter (PM10): Measures larger microscopic particles up to 10 microns in size, such as dust and pollen.

Volatile organic compounds (VOCs): These are typically odours that may be potentially harmful, found in cleaning products, paints, and furnishings.

Nitrogen dioxide and other oxidising gases: Potentially harmful gases released by combustion, such as from cooking with gas or vehicle exhaust.

Indoor temperature: Monitors the ambient room temperature.

Indoor humidity: Shows the amount of water vapor in the air as a percentage.

Formaldehyde (HCHO): A common indoor pollutant that can be released from furnishings, floorings, and glue.

Filters: Displays the remaining life of your filters and indicates when they need replacing.

Wi-Fi: Shows the current status of the connection to the Wi-Fi network.

When you set your DYSON PURIFIER COOL PC2 DE-NOX to Auto mode, the on-board sensors will intelligently adjust the machine’s settings according to the air quality.

Air quality: Your machine will pause when the target air quality has been reached and will switch on again when the air quality levels drop.

Airflow speed: The airflow speed will increase until the target air quality and temperature have been reached.

Press the Airflow speed button to increase and decrease the airflow speed.

Press the Airflow direction button to change the direction of airflow from the front to the back. Select the Airflow direction to Fan mode for airflow from the front for purifying and cooling.

Press the Oscillation button on the remote control to circulate the air around the room. You can scroll through the oscillation settings from 0° to 350°. You can also customise your oscillation setting in the MyDyson™ app.

In Night mode, your DYSON PURIFIER COOL PC2 DE-NOX will continue to monitor and respond to changes in air quality, but using only its quietest settings and with its LCD screen dimmed.

Press the Night mode and Sleep timer button on the remote control to scroll through the timer options.

Before changing your filter, switch off and unplug your purifier. The remaining filter life is displayed on the screen and will indicate when your non-washable filters need replacing.

Your DYSON PURIFIER COOL PC2 DE-NOX comes with a permanent catalytic filter that you will not need to change, and a HEPA+K-Carbon filter.

To change your HEPA+K-Carbon filter:

1. Push down on the buttons on either side of your machine to release the outer cover.

2. Push down on the tabs to remove the filter.

3. Push the replacement filter into the outer cover and make sure the tabs click into place.

4. Put the outer covers into position on your machine and push firmly until they both click securely into position.

5. Plug in and switch your machine on, and then reset your filter life.

It is important to reset your filter life after you have replaced your filter. To reset the HEPA+K-Carbon filter life, press and hold the Night mode button on your remote control. The display on your machine will countdown from five, the filter life will be reset, and your machine will be ready to use.

To get the best performance from your DYSON PURIFIER COOL PC2 DE-NOX, it’s important to regularly clean it and check for blockages.

Cleaning your machine: If your machine is dusty, wipe with a damp lint-free cloth. Do not use detergents or polishes to clean your machine.

Checking for blockages: Look for blockages in the air inlet holes on the filter and the small aperture inside the loop amplifier. Use a soft brush to remove dust and debris.

If your machine shows an error code, try turning it off and then on again. If this does not clear the error code, contact Dyson Customer Care.