DELONGHI XLM21LE (01) PDF DOCUMENT

The main components of the DELONGHI XLM21LE are:

A1. MAX power selection/deselection button

A2. Filter

A3. 0.5 L dust container

A4. Cover opening device for emptying

A5. Filter

A6. EPA filter

A7. ON/OFF button

A8. Rechargeable battery release button

A9. Rechargeable battery

A10. Charge and ON LED

The charge and ON LED (A10) on your DELONGHI XLM21LE indicates the following statuses:

Off: The appliance is off.

On green: The appliance is on and the battery is charged.

Flashing green: The appliance is on and the battery is nearly flat.

On orange: The battery charger is connected and the appliance is charging.

On green (when charging): The battery charger is connected and the appliance is fully charged.

The accessories for the DELONGHI XLM21LE include:

B1. Motorised brush for hard floors and short-pile carpet

B2. Release button

B3. Roller with bristles viewing window

B4. Roller with bristles

B5. 2-in-1 tool: crevice tool and furniture brush

B6. Flexible hose (*certain models only)

B7. Mini brush (*certain models only)

B8. Brush insert for mini brush (*certain models only)

B9. Suction hose

The wall mount for the DELONGHI XLM21LE consists of the following parts:

C1. Battery charger

C2. Wall mount

C3. Anchors for wall mount

C4. Tool holder base

C5. Screws for fixing the base to the mount

1. Insert the rechargeable battery (A9) into the main body of the vacuum until it clicks into place.

2. Connect the battery charger (C1) to the charging port on the appliance.

3. Plug the charger into a power outlet.

4. The charge indicator LED (A10) will turn orange to show it is charging.

5. Allow the appliance to charge for approximately 5.5 hours. When charging is complete, the LED will turn green.

1. Attach the suction hose (B9) to the main body of the vacuum.

2. Attach the desired accessory, such as the motorised brush (B1) or the 2-in-1 tool (B5), to the other end of the suction hose.

3. Press the ON/OFF button (A7) to start the vacuum.

4. For increased suction power, press the MAX power button (A1). Press it again to return to normal power.

5. Press the ON/OFF button (A7) again to turn the appliance off.

1. When the dust inside the container (A3) reaches the MAX line, it is time to empty it.

2. Hold the appliance over a dustbin.

3. Press the cover opening device (A4) to release the bottom lid of the dust container.

4. Allow the dust and debris to fall into the bin.

5. Close the lid securely until it clicks.

1. Ensure the appliance is unplugged and turned off.

2. Press the release button to detach the dust container (A3) from the main body.

3. Remove the filter assembly from the top of the dust container by twisting it.

4. Separate the filters (A2, A5, A6).

5. Wash the filters under running water. Do not use detergents or abrasive materials.

6. Allow the filters to air dry completely for at least 24 hours before reassembling them and placing them back into the appliance. Do not use a hairdryer or oven to dry them.

1. Turn the motorised brush head (B1) upside down.

2. Locate the lock on the side of the brush head and turn it to the “unlock” position to remove the side cover.

3. Slide the roller with bristles (B4) out from the housing.

4. Use scissors to carefully cut and remove any tangled hair, threads, or debris from the bristles.

5. Wipe the inside of the brush housing clean.

6. Reinsert the clean roller back into the housing.

7. Replace the side cover and turn the lock to the “lock” position until it clicks securely.

1. Assemble the tool holder base (C4) to the main wall mount (C2) using the provided screws (C5).

2. Choose a location on the wall near a power outlet. Mark two holes for drilling, ensuring the top of the mount will be approximately 950 mm from the floor and the holes are 120 mm apart horizontally.

3. Drill holes at the marked locations and insert the wall anchors (C3).

4. Screw the wall mount assembly securely to the wall.

5. You can now hang your DELONGHI XLM21LE on the mount for storage and charging, and place accessories on the holder.

Yes, you can charge the battery separately. Press the battery release button (A8) and slide the battery (A9) off the main unit. Connect the battery charger (C1) directly to the battery and plug it into a power outlet to charge.

If your DELONGHI XLM21LE does not turn on, the battery is likely completely discharged. Connect the appliance to the battery charger and allow it to charge fully. The LED indicator will be orange during charging and turn green when complete.

A flashing green LED light indicates that the appliance is on but the battery is nearly flat. You should charge the battery soon. A full charge takes approximately 5.5 hours.

If you notice low cleaning efficiency from the motorised brush, it is likely clogged with hair, threads, or debris. You should clean the brush roll by unlocking and removing it from the brush head, cutting away any tangled material, and reinstalling it.