Free English BABYLISS AS95E (01) PDF document. Download the PDF, use the online viewer, or browse the FAQs for easy troubleshooting.
CLICK HERE TO DOWNLOAD BABYLISS AS95E (01) PDF DOCUMENT
If this is not the document you want for this product, click here to see if we have any other documents for this product.
How to use the PDF below:
* Touchscreen: Swipe up/down with-in the PDF to scroll and pinch or spread with two fingers to zoom.
* Mouse: While your mouse is hovering over the PDF, use the mouse wheel to scroll and click on the – / + buttons at the bottom of the PDF to zoom.
How do I prepare my hair for using the BABYLISS AS95E?
Ensure hair is towel dried and combed through to remove excess water and any tangles. Divide the hair into sections ready for drying and styling.
How do I turn on the BABYLISS AS95E?
Slide the switch on the BABYLISS AS95E to the heat or airflow setting suitable for your hair type to turn on the appliance.
How do I switch off and store the BABYLISS AS95E?
After use, slide the switch on the BABYLISS AS95E to the 0 position to switch off and unplug the appliance. Always allow the BABYLISS AS95E to cool down completely before storing it away.
How does the Wet Mode work on the BABYLISS AS95E?
For first use, the BABYLISS AS95E will be set to wet mode, which is indicated by the wet mode symbol. The warm air vents will be open to dry and style the hair. In wet mode, air will be released from the entire surface of the dryer for a quick blow dry.
How do I get the best volumizing results with the BABYLISS AS95E in wet mode?
Place the BABYLISS AS95E head underneath a section of hair, close to the scalp, and hold for a few seconds to allow the large oval barrel to add volume at the roots.
How do I select Dry Mode on the BABYLISS AS95E?
To select dry mode on the BABYLISS AS95E, turn the dial on the top of the styler a quarter turn clockwise until the dry mode symbol is displayed. This will close the air vents for less direct heat on dry hair when you need a style boost.
What happens when the BABYLISS AS95E is in Dry Mode?
In dry mode, air will be released from the flatter straightening plates only of the BABYLISS AS95E for a gentle boost on dry hair.
How do I activate the Anti-Frizz Technology on the BABYLISS AS95E?
To activate the anti-frizz technology on the BABYLISS AS95E, press the ion button whilst the styler is on. This will illuminate the ionic blue light at the base of the brush head, activating the ion technology.
How do I turn off the Anti-Frizz Technology on the BABYLISS AS95E?
To turn off the anti-frizz technology on the BABYLISS AS95E for a more matte, textured result, press the ion button. The blue light will turn off.
How should I clean the exterior of the BABYLISS AS95E?
Ensure the BABYLISS AS95E is switched off, unplugged, and cool. Clean the outside of the appliance by wiping it with a damp cloth. Make sure no water enters the appliance and it is completely dry before use.
How do I clean the removable magnetic inlet filter of the BABYLISS AS95E?
To increase the lifespan of the BABYLISS AS95E, ensure it is switched off, unplugged, and cool. Gently slide the magnetic filter away from the appliance. Using a soft brush, clean any hair and other debris from the filter. Ensure to reattach the filter once cleaning is complete.
What is the purpose of the heat protective glove included with the BABYLISS AS95E?
The universal heat protective glove provided with the BABYLISS AS95E is designed to protect your hand from temporary contact with the barrel when wrapping hair around the appliance. Please note it is only designed for initial contact protection; prolonged contact with the hot surface will cause discomfort.
CLICK HERE TO DOWNLOAD BABYLISS AS95E (01) PDF DOCUMENT