BABYLISS PRO 4RTISTS S315A (01) PDF Document

The BABYLISS PRO 4RTISTS S315A professional digital dryer is designed with high-performance characteristics for salon use.

Additional features include a cold shot button, turbo function, removable silencer rear filter, hanging hook, and various attachments including three concentrator nozzles, a beard pic, and a diffuser.

The EDM TECHNOLOGY in the BABYLISS PRO 4RTISTS S315A uses electronics-driven motors to provide several advantages:

Long lifespan: The motor lasts up to 10,000 hours, which is up to 10 times longer than standard AC engines.

Steadiness: The motor is driven by electronics for optimum output, ensuring the air flow is constantly controlled for maximum stability.

Less vibrations: The electronics-driven motor features double ball bearings which significantly reduce vibrations. This reduces muscular tension for the user and provides optimum comfort.

More silence: The electronics control the motor’s rotation at a rate of 4 million times per second. This softens each sequence of rotation to reduce generating noise.

The turbo function on the BABYLISS PRO 4RTISTS S315A serves as a power and care booster. It offers the twofold advantage of increasing air speed and air flow without increasing the temperature. This allows for faster drying and can be used to emphasize the finishing touches on specific locks of hair without compromising hair protection.

To achieve the best results with your BABYLISS PRO 4RTISTS S315A, follow these drying procedures:

1. Shampoo and condition the hair. Rinse thoroughly and towel-blot to remove excess moisture.

2. Section the hair. Using the dryer with a styling brush, direct hot air through one section of hair at a time.

3. Move the dryer steadily across each section so that the hot air passes through the hair. Always direct the airflow at the hair, not the scalp.

4. Keep the air intake vents unobstructed and free from hair while drying.

5. To avoid over-drying or damage to hair and skin, do not concentrate heat on one section for any length of time. Keep the dryer moving as you style.

6. When creating curls or waves, dry the hair almost completely on a warmer temperature setting, then finish the styling with cooler air.

7. Use the included concentrator attachments when you need drying power in small areas or when you want to relax curly hair.

The BABYLISS PRO 4RTISTS S315A includes a snap-on beard pic as an attachment for the 6 x 75 mm nozzle to allow for beard drying and styling. It is recommended to set the dryer on temperature I and speed I for beard care. If you wish to decrease the temperature level further, you can use speed II. This can be done with or without the turbo function enabled.

The BABYLISS PRO 4RTISTS S315A features a central negative ion generator that produces millions of ions per cubic centimeter. Hair is naturally positively charged, and this charge increases during drying, generating static electricity that causes hair scales to move away from each other. The negative ions neutralise the positive charge, removing static electricity. This results in hair that is shiny, easy to style, and better prepared for hair care products.

The BABYLISS PRO 4RTISTS S315A comes with three different concentrator nozzles and additional accessories:

Straight, narrow 6mm x 60mm nozzle: Perfect for straightening as it helps achieve the required tension on the hair.

Ultra-thin 4mm x 70mm nozzle: Designed for optimal, controlled air pressure and increased efficiency.

Beveled 6mm x 75mm large nozzle: Ideal for smoother blow-drying with a diagonal shape that hugs the brush perfectly. This nozzle also supports the snap-on beard pic attachment.

New nozzles with fins: These are designed to decrease the high temperature on the sides of the nozzle. They can be touched with hands even when the dryer is on and reduce the risk of damaging surfaces when the dryer is laid down.

To maintain the performance of your BABYLISS PRO 4RTISTS S315A, keep the unit clean by following these steps:

1. Always unplug the cord and allow the dryer to cool before cleaning.

2. Use a small brush or the brush attachment of a vacuum cleaner to remove dust and lint from the air intake openings.

3. Wipe the outer surface of the dryer with a cloth only.

4. Regularly clean the filter intake to prevent buildup from hair, lint, and debris. Blocked air intake vents can cause the dryer to overheat.

5. If the dryer overheats, an automatic safety device will shut it off. If this happens, turn the dryer off, unplug the cord, and allow it to cool for 10 to 15 minutes before restarting. Ensure the air vents are clean before turning it back on.

Follow these steps to clean the filter intake of the BABYLISS PRO 4RTISTS S315A:

1. Remove the intake filter from the back of the dryer by twisting it counterclockwise.

2. Reach through the opening and press the mesh screen to release it from the filter housing.

3. Visually inspect the filter to ensure no hair is caught. Rinse the mesh screen ONLY under running water to clear any debris. For difficult buildup, you may use a stiff bristle brush.

4. Ensure the mesh screen is free from debris and completely dry before reassembling.

5. Place the screen into the bottom part of the removable intake filter and press with your finger around the edge of the screen to lock it back in place.

When using the BABYLISS PRO 4RTISTS S315A, adhere to these safety warnings to avoid damage or injury:

Do NOT use the dryer with the air inlet pressed against the hair. This will cause damage to internal parts.

Never block the air openings of the appliance.

Allowing the filter to become blocked will decrease performance, shorten the lifespan of the dryer, and risk voiding the warranty.

Avoid concentrating heat on one section of hair for too long to prevent damage to hair or skin.