BABYLISS PRO 4RTISTS FXBDB1E (01) PDF Document

The BABYLISS PRO 4RTISTS FXBDB1E is a high-performance professional dryer designed with the following technical specifications:

Additional features include a central ion generator, 2 speed settings, 2 temperature settings, a cold shot button, a turbo function, and a removable silencer rear filter. The unit also includes a hanging hook for easy storage.

To achieve optimal results with the BABYLISS PRO 4RTISTS FXBDB1E, follow these standard drying procedures:

1. Shampoo and condition the hair, then rinse thoroughly and towel-blot to remove excess moisture.

2. Section the hair and use the dryer along with a styling brush, directing hot air through one section at a time.

3. Move the dryer steadily across each section so that the hot air passes through the hair. Direct the airflow at the hair itself, not the scalp.

4. Ensure the air intake vents of the BABYLISS PRO 4RTISTS FXBDB1E remain unobstructed and free from hair during the process.

5. To avoid over-drying or damage, do not concentrate heat on one section for an extended period; keep the dryer moving as you style.

6. If creating curls or waves, dry the hair almost completely on a warmer temperature setting, then finish the styling with cooler air.

The BABYLISS PRO 4RTISTS FXBDB1E includes a snap-on beard pic designed to be attached to the 6 x 75 mm nozzle. For proper beard care, it is recommended to set the dryer to temperature I and speed I. If you wish to decrease the temperature level further, you may use speed II. This can be performed with or without the turbo function enabled.

The BABYLISS PRO 4RTISTS FXBDB1E comes with several specialized attachments to provide various styling options:

Straight, narrow 6mm x 60mm nozzle: This attachment is perfect for straightening as it allows you to achieve the required tension on the hair.

Ultra-thin 4mm x 70mm nozzle: This nozzle provides optimal, controlled air pressure for increased efficiency.

Beveled 6 x 75 mm large nozzle: This nozzle is designed for smoother blow-drying. Its diagonal shape hugs the contours of a styling brush perfectly.

Beard pic: A snap-on attachment for the 6 x 75 mm nozzle used for drying and styling beards.

Diffuser: Used for drying curly and wavy hair without adding unwanted volume.

Silencer: Attached to the rear to provide a more comfortable and quieter experience for the user and client.

The new nozzles with fins for the BABYLISS PRO 4RTISTS FXBDB1E are designed to decrease the high temperature on the sides of the nozzle. This feature allows the nozzle to be touched with hands even when the dryer is in operation. Additionally, it reduces the risk of damaging surfaces when the dryer is laid down while still hot. These nozzles can also be used as a pic to better control hair strands during styling.

The EDM (Electronics Driven Motor) Technology in the BABYLISS PRO 4RTISTS FXBDB1E offers several benefits:

Long Lifespan: The motor lasts up to 10,000 hours, which is up to 10 times longer than standard AC engines.

Steadiness: Electronics drive the motor for optimum output, ensuring the air flow is constantly controlled for maximum stability.

Less Vibration: The double ball bearing system significantly reduces vibrations, which helps reduce muscular tension during use.

More Silence: The electronics control the motor’s rotation at 4 million times per second, which softens the rotation sequence to reduce noise.

The Turbo function provides a power and care booster by increasing speed and air flow without increasing the temperature. This allows for faster drying and emphasizes finishing touches on specific locks while maintaining hair protection.

To keep the BABYLISS PRO 4RTISTS FXBDB1E operating correctly, the unit must be kept clean. Follow these steps for filter maintenance:

1. Unplug the cord and allow the dryer to cool completely.

2. Remove the intake filter from the back of the dryer by twisting it counterclockwise.

3. Reach through the opening and press the mesh screen to release it from the filter housing.

4. Visually inspect the filter to ensure no hair is caught. Rinse the mesh screen ONLY under running water to clear debris. For difficult buildup, you may use a stiff bristle brush.

5. Ensure the mesh screen is completely dry and free of all debris before proceeding.

6. Place the screen back into the bottom part of the removable intake filter and press around the edges with your finger to lock it into place.

7. Wipe the outer surface of the dryer with a dry cloth only.

The BABYLISS PRO 4RTISTS FXBDB1E is equipped with an automatic safety device that will shut the unit or the heat off if overheating occurs. If the unit cycles off, turn the dryer off and unplug the cord. Allow the dryer to cool for 10 to 15 minutes before attempting to restart it. Before turning it back on, ensure that the air vents are clean and unobstructed.

When using the BABYLISS PRO 4RTISTS FXBDB1E, observe the following safety warnings:

Do NOT use the dryer with the air inlet pressed directly against hair, as this will cause damage to internal parts.

Never block the air openings of the appliance.

Keep the filter intake free of buildup from lint, hair, and other debris. A blocked filter decreases performance, shortens the life of the dryer, and risks voiding the warranty.

Always unplug the unit before cleaning it.

The BABYLISS PRO 4RTISTS FXBDB1E features a central negative ion generator that produces millions of ions per cm3. Hair naturally carries a positive charge, which is increased during drying and creates static electricity. The negative ions generated by the dryer neutralise this positive charge, removing static electricity. This process causes the scales of the hair to close, making the hair shiny, easy to style, and acting as a catalyst for hair care products.