BABYLISS PRO 4RTISTS FXBDW1E (01) PDF Document

The BABYLISS PRO 4RTISTS FXBDW1E is a professional digital dryer featuring advanced engineering and high-performance components. The following table details the core technical specifications:

Additional features include:

Central ion generator.

2 speed settings and 2 temperature settings.

Cold shot and Turbo function.

Removable silencer rear filter and hanging hook.

The BABYLISS PRO 4RTISTS FXBDW1E utilizes EDM (Electronic Driven Motors) TECHNOLOGY, which provides several performance advantages:

Long lifespan: The motor lasts up to 10,000 hours, which is up to 10 times longer than traditional AC engines.

Steadiness: The motor is driven by electronics for optimum output. Airflow is constantly controlled to provide maximum stability.

Less vibrations: Thanks to the double ball bearing system, vibrations are significantly reduced, which helps prevent muscular tension for the user.

More silence: Electronics control the motor rotation at a rate of 4 million times per second, softening the rotation sequence to reduce noise.

To achieve the best results with your BABYLISS PRO 4RTISTS FXBDW1E, follow these drying basics:

1. Shampoo and condition the hair, then rinse thoroughly. Towel-blot hair to remove excess moisture.

2. Section the hair. Using the dryer with a styling brush, direct hot air through one section of hair at a time.

3. Move the dryer steadily across each section so that hot air passes through the hair. Direct the airflow at the hair, not the scalp.

4. Keep the dryer intake vents unobstructed and free from hair during use.

5. To avoid over-drying or damage, do not concentrate heat on one section for any length of time. Keep the dryer moving as you style.

6. When creating curls or waves, dry the hair almost completely on a warmer setting, then finish the styling with cooler air.

The Turbo function on the BABYLISS PRO 4RTISTS FXBDW1E is a power and care booster. It has the twofold advantage of being able to increase speed and airflow without increasing the temperature. This makes drying faster and allows you to emphasize the finishing touches on specific locks of hair without compromising hair protection.

The BABYLISS PRO 4RTISTS FXBDW1E includes a snap-on beard pic that attaches to the 6 x 75 mm nozzle. For beard care, it is recommended to set the dryer to temperature I and speed I. If you wish to decrease the temperature level further, you can use speed II. This can be done with or without the turbo function active.

When using the BABYLISS PRO 4RTISTS FXBDW1E, observe the following safety precautions:

Do NOT use the air inlet against the hair, as this will cause damage to internal parts.

Never block the air openings of the appliance.

Keep the filter intake free of buildup from lint, hair, and other debris by cleaning it regularly.

A blocked filter will decrease performance, shorten the life of the dryer, and risk voiding the warranty.

The professional dryer is equipped with a cold air setting for finishing styles.

The BABYLISS PRO 4RTISTS FXBDW1E has a central negative ion generator that produces millions of ions per cm3. Hair is naturally positively charged, and this charge increases during drying, generating static electricity. The negative ions neutralise the positive charge to remove static. This results in hair that is shiny, easy to style, and more receptive to hair products.

The BABYLISS PRO 4RTISTS FXBDW1E comes with several specialised attachments:

One straight, narrow 6mm x 60mm nozzle: Perfect for straightening as it helps achieve the required tension on the hair.

One ultra-thin 4mm x 70mm nozzle: Designed for optimal, controlled air pressure and efficiency.

One 6 x 75 mm beveled, large nozzle: Used for smoother blow-drying; its diagonal shape hugs the brush perfectly.

Beard pic: A comb attachment that snaps onto the 6 x 75 mm nozzle for beard styling.

Silencer: Provided for increased comfort during use.

Diffuser: Included for drying curly and wavy hair without adding unwanted volume.

The BABYLISS PRO 4RTISTS FXBDW1E features new nozzles with fins that decrease the high temperature on the sides of the nozzle. This allows the nozzle to be touched with hands even when the dryer is on. Additionally, it reduces the risk of damaging surfaces when the dryer is laid down while still in use. The fins can also be used as a pic to help control hair strands during styling.

To maintain proper performance, the BABYLISS PRO 4RTISTS FXBDW1E must be kept clean. Follow these steps for filter maintenance:

1. Unplug the cord and allow the dryer to cool.

2. Remove the intake filter from the back of the dryer by twisting it counterclockwise.

3. Reach through the opening and press the mesh screen to release it from the filter.

4. Visually inspect the filter to ensure no hair is caught. Rinse the mesh screen ONLY under running water to clear debris.

5. Use a stiff bristle brush for any difficult buildup if necessary.

6. Ensure the mesh screen is completely dry, then place it back into the bottom part of the removable intake filter.

7. Press with your finger around the edge of the screen to lock it back into place.

8. The outer surface of the dryer should be wiped clean with a cloth only.

The BABYLISS PRO 4RTISTS FXBDW1E is equipped with an automatic safety device. If the air intake vents become blocked or clogged, the dryer may overheat, causing the safety device to shut the dryer or the heat off. If this occurs, turn the dryer off and unplug the cord. Allow the unit to cool for 10 to 15 minutes. Before restarting, ensure the air vents are completely clean and free of lint or hair.