BABYLISS PRO 4RTISTS FXBDG1E (01) PDF Document

The BABYLISS PRO 4RTISTS FXBDG1E is a professional digital dryer featuring high-speed EDM Technology and the following specifications:

Additional features include a central ion generator, cold shot button, turbo function, hanging hook, and a removable silencer rear filter.

To dry hair using the BABYLISS PRO 4RTISTS FXBDG1E, follow these steps:

Step 1. Shampoo and condition the hair, then rinse thoroughly. Towel-blot hair to remove excess moisture and section the hair.

Step 2. Use the dryer along with a styling brush and direct hot air through one section of hair at a time.

Step 3. Move the dryer steadily across each section so that the hot air passes through the hair. Direct the airflow at the hair, not the scalp.

Step 4. Keep the dryer’s air intake vents unobstructed and free from hair while drying.

Step 5. To avoid over-drying or damage, do not concentrate heat on one section for any length of time. Keep the dryer moving as you style.

Step 6. When creating curls or waves, dry hair almost completely on a warmer temperature setting, then finish styling with cooler air.

The BABYLISS PRO 4RTISTS FXBDG1E includes a snap-on beard pic as an attachment for the 6 x 75 mm nozzle to allow for beard care.

It is recommended to set the dryer to temperature I and speed I for beard care. If you wish to decrease the temperature level further, you can use speed II. These settings can be used with or without the turbo function every time you style your beard.

To keep the BABYLISS PRO 4RTISTS FXBDG1E operating properly, it must be kept clean:

Step 1. When cleaning is needed, unplug the cord and allow the unit to cool.

Step 2. Clean dust and lint from the air intake openings using a small brush or the brush attachment of a vacuum cleaner.

Step 3. The outer surface of the dryer should be wiped clean with a dry cloth only.

Step 4. Ensure that the filter is cleaned regularly to prevent blocked air intake vents, which can cause the dryer to overheat and decrease performance.

Cleaning the filter on your BABYLISS PRO 4RTISTS FXBDG1E is essential for maintaining performance:

Step 1. Remove the intake filter from the back of the dryer by twisting it counterclockwise.

Step 2. Reach through the opening and press the mesh screen to release it from the filter.

Step 3. Visually inspect the filter to ensure no hair is caught. Rinse the mesh screen ONLY under running water to clear debris.

Step 4. If there is difficult buildup, use a stiff bristle brush to remove it.

Step 5. Ensure the mesh screen is free from debris and completely dry before placing the screen back into the bottom part of the removable intake filter.

Step 6. Press with your finger around the edge of the screen to lock the mesh screen back in place.

The BABYLISS PRO 4RTISTS FXBDG1E is equipped with an automatic safety device that will shut the dryer or the heat off if overheating occurs. If the unit or the heat cycles off, follow these steps:

Step 1. Turn the dryer off and unplug the power cord.

Step 2. Allow the dryer to cool for 10 to 15 minutes before attempting to restart it.

Step 3. Before turning it back on, make sure the air vents are clean and unobstructed by following the standard filter cleaning procedure.

The EDM Technology in the BABYLISS PRO 4RTISTS FXBDG1E provides several professional advantages:

Long lifespan: The motor lasts up to 10,000 hours, which is up to 10 times longer than standard AC engines.

Steadiness: The motor is electronically driven for optimum output, and airflow is constantly controlled for maximum stability.

Less vibrations: The electronics driven motor with double ball bearings significantly reduces vibrations, reducing muscular tension and providing better comfort.

More silence: Electronics control the motor’s rotation at a rate of 4 million times per second to soften noise sequences.

The BABYLISS PRO 4RTISTS FXBDG1E features a central negative ion generator that produces millions of ions per cm3. Hair is naturally positively charged, and this charge increases during drying, creating static electricity. The negative ions neutralise this positive charge to remove static, leaving the hair shiny and easy to style. Additionally, ionic technology acts as a catalyst for hair care products.

The BABYLISS PRO 4RTISTS FXBDG1E includes several specialized accessories:

6mm x 60mm Straight Nozzle: This narrow nozzle is perfect for straightening as it allows you to achieve required tension on the hair.

4mm x 70mm Ultra-thin Nozzle: Designed for optimal, controlled air pressure and increased efficiency.

6mm x 75mm Beveled Nozzle: A large nozzle for smoother blow-drying; its diagonal shape hugs the brush perfectly. This nozzle also supports the snap-on beard pic for beard styling.

Silencer: Included for increased comfort during use for both the stylist and the client.

Diffuser: Used for drying curly and wavy hair without adding unwanted volume.

The turbo function on the BABYLISS PRO 4RTISTS FXBDG1E allows the user to increase air speed and airflow without increasing the temperature. This makes drying faster and helps emphasize the finishing touches on specific locks of hair while maintaining hair protection.

When using the BABYLISS PRO 4RTISTS FXBDG1E, do NOT press the air inlet directly against hair. Doing so can cause damage to the internal parts of the appliance. You must always ensure that the air openings are never blocked and are kept free of buildup from lint, hair, and other debris.