SONY MEX-BT3750U (01) PDF Document

Free English SONY MEX-BT3750U (01) PDF document. Download the PDF, use the online viewer, or browse the FAQs for easy troubleshooting.

CLICK HERE TO DOWNLOAD SONY MEX-BT3750U (01) PDF DOCUMENT

If this is not the document you want for this product, click here to see if we have any other documents for this product.

How to use the PDF below:
* Touchscreen: Swipe up/down with-in the PDF to scroll and pinch or spread with two fingers to zoom.
* Mouse: While your mouse is hovering over the PDF, use the mouse wheel to scroll and click on the – / + buttons at the bottom of the PDF to zoom.

How do I cancel the demonstration display on the SONY MEX-BT3750U?

Step 1. Press and hold the select button to enter the setup display.

Step 2. Press the select button repeatedly until DEMO appears.

Step 3. Rotate the control dial to select DEMO-OFF.

Step 4. Press and hold the select button to complete the setup and return to normal play or reception mode.

How do I reset the SONY MEX-BT3750U?

Detach the front panel and press the RESET button with a pointed object, such as a ball-point pen. Note that pressing the RESET button will erase the clock setting and some stored contents.

How do I set the clock on the SONY MEX-BT3750U?

Step 1. Press and hold the select button.

Step 2. Press the select button repeatedly until CLOCK-ADJ appears.

Step 3. Press SEEK + to make the hour indication flash.

Step 4. Rotate the control dial to set the hour and minute. Use SEEK + or – to move between the hour and minute indicators.

Step 5. After setting the minute, press the select button to start the clock.

How do I detach the front panel of the SONY MEX-BT3750U?

Step 1. Press the OFF button to turn the unit off.

Step 2. Press the release button and pull the panel off towards you.

How do I search for a track by name using the Quick-BrowZer feature on the SONY MEX-BT3750U?

Step 1. Press the BROWSE button to enter the Quick-BrowZer mode.

Step 2. Rotate the control dial to select the desired search category, then press it to confirm.

Step 3. Repeat step 2 until the desired track is selected. Playback will start automatically.

How does the ZAPPIN feature work on the SONY MEX-BT3750U?

Step 1. Press the ZAP button during playback. ZAPPIN appears in the display, and playback starts from a passage of the next track.

Step 2. The passage is played for the set time. Press the select button or the ZAP button when you hear a track you want to listen to. The unit returns to normal playback mode from the beginning of that track.

How do I store radio stations automatically on the SONY MEX-BT3750U using BTM?

Step 1. Press the SOURCE button repeatedly until TUNER appears. Press MODE repeatedly to select the band (FM1, FM2, FM3, AM1, or AM2).

Step 2. Press and hold the BTM button until BTM flashes. The unit stores stations in order of frequency on the number buttons.

What repeat and shuffle options are available for CDs on the SONY MEX-BT3750U?

You can press the 3 (REP) or 4 (SHUF) buttons repeatedly during playback to cycle through the following options:

Select	To play
TRACK	track repeatedly
ALBUM	album repeatedly
SHUF ALBUM	album in random order
SHUF DISC	disc in random order

How do I play back a USB device on the SONY MEX-BT3750U?

Step 1. Connect the USB device to the USB terminal. If a cable is required, use the one supplied with your USB device.

Step 2. If the unit is already on, press the SOURCE button repeatedly until USB appears in the display.

Step 3. To remove the device, stop playback first, then remove the USB device.

How do I pair a Bluetooth device with the SONY MEX-BT3750U?

Step 1. Place the Bluetooth device within 1 meter of the SONY MEX-BT3750U.

Step 2. Press and hold the BT button until the Bluetooth icon flashes for about 5 seconds to enter pairing standby mode.

Step 3. Set the Bluetooth device to search for the SONY MEX-BT3750U, which will be displayed as XPLOD.

Step 4. If a passcode is required on your device, input 0000.

Step 5. Once paired, set the Bluetooth device to connect to the SONY MEX-BT3750U.

How do I make a handsfree call on the SONY MEX-BT3750U?

Step 1. Press the SOURCE button repeatedly until BT PHONE appears.

Step 2. Press and hold the handsfree (phone) button for 3 seconds or more to use the redial function.

How do I adjust the volume level of a Bluetooth audio device on the SONY MEX-BT3750U?

Step 1. Start playback on the Bluetooth audio device at a moderate volume.

Step 2. Set your usual listening volume on the SONY MEX-BT3750U.

Step 3. Press the select button repeatedly until BTA appears.

Step 4. Rotate the volume control dial to adjust the input level between -8 dB and +18 dB.

How do I customize the EQ3 equalizer on the SONY MEX-BT3750U?

Step 1. Select a source, then press the select button repeatedly to select EQ3.

Step 2. Rotate the control dial to select CUSTOM.

Step 3. Press the select button repeatedly to choose between LOW, MID, or HI.

Step 4. Rotate the control dial to adjust the level between -10 dB and +10 dB in 1 dB steps.

Step 5. Press the BACK button to finish and return to the normal display.

How do I delete the registration of all paired Bluetooth devices on the SONY MEX-BT3750U?

Step 1. Press OFF to turn the unit off.

Step 2. If the Bluetooth icon is lit, press and hold the BT button until it turns off.

Step 3. Press and hold the select button.

Step 4. Press the select button repeatedly until BT INIT appears.

Step 5. Press SEEK + to begin initialization. Do not turn off the power while INITIAL is flashing.