BABYLISS PRO 4RTISTS FXBDR1E (01) PDF Document

The BABYLISS PRO 4RTISTS FXBDR1E is a professional digital dryer featuring a high-speed engine and ergonomic design. The primary features are as follows:

Additional features include a central ion generator, cold shot button, turbo function, hanging hook, and a removable silencer rear filter.

The BABYLISS PRO 4RTISTS FXBDR1E utilizes a new technology of electronics driven motors that provides several benefits:

Long Lifespan: The motor lasts up to 10,000 hours, which is up to 10 times longer than standard AC engines.

Steadiness: The motor is driven by electronics for optimum output. Airflow is constantly controlled to provide maximum stability.

Less Vibrations: Thanks to the electronics driven motor with double ball bearings, vibrations are significantly reduced. This reduces muscular tensions and provides optimum comfort for the user.

More Silence: Electronics control the rotation of the motor at a rate of 4 million times per second. This control softens each sequence of rotation that would otherwise generate noise.

The turbo function on the BABYLISS PRO 4RTISTS FXBDR1E has the twofold advantage of being able to increase speed and airflow without increasing the temperature. This makes drying faster and can be used to emphasize finishing touches on specific hair locks without compromising hair protection.

To dry hair effectively with the BABYLISS PRO 4RTISTS FXBDR1E, follow these steps:

1. Shampoo and condition the hair, rinse thoroughly, and towel-blot to remove excess moisture.

2. Section the hair. Using the dryer and a styling brush, direct hot air through one section of hair at a time.

3. Move the dryer steadily across each section so that hot air passes through the hair. Ensure the airflow is directed at the hair and not the scalp.

4. Keep the air intake vents unobstructed and free from hair during the process.

5. To avoid over-drying or damage, do not concentrate heat on one section for an extended period. Keep the dryer moving as you style.

6. When creating curls or waves, dry the hair almost completely on a warmer temperature setting, then finish the styling using the cooler air setting.

The BABYLISS PRO 4RTISTS FXBDR1E includes a snap-on beard pic attachment that fits onto the 6 x 75 mm nozzle. For beard care, it is recommended to set the dryer to temperature I and speed I. If you wish to decrease the temperature level further, use speed II. The beard can be styled with or without the turbo function active.

When operating the BABYLISS PRO 4RTISTS FXBDR1E, please observe the following warnings:

Do NOT use the dryer with the air inlet pressed directly against the hair, as this will cause damage to the internal parts.

Never block the air openings of the appliance.

Keep the filter intake free of buildup from lint, hair, and other debris by cleaning it regularly. A blocked filter decreases performance, shortens the lifespan of the dryer, and may void the warranty.

To avoid skin or hair damage, never concentrate the heat on a single section for any length of time.

The BABYLISS PRO 4RTISTS FXBDR1E features a central negative ion generator that produces millions of ions per cubic centimeter. Hair is naturally positively charged, and this charge increases during drying, generating static electricity. The negative ions neutralise the positive charge to remove static electricity. This results in hair that is shiny, easy to style, and better prepared for hair care products.

The BABYLISS PRO 4RTISTS FXBDR1E comes with the following accessories:

6mm x 60mm Straight Nozzle: A narrow nozzle perfect for straightening hair by allowing the user to achieve the required tension.

4mm x 70mm Ultra-thin Nozzle: Designed for optimal, controlled air pressure and high efficiency.

6 x 75mm Beveled Large Nozzle: Features a slightly diagonal shape that hugs the shape of a brush for smoother blow-drying.

Beard Pic: A comb attachment designed to be used with the 6 x 75 mm nozzle for beard grooming.

Silencer: Provides increased comfort for both the stylist and the client by reducing noise.

Diffuser: Used for drying wavy or curly hair without adding unwanted volume.

The BABYLISS PRO 4RTISTS FXBDR1E features new nozzles with fins designed to decrease high temperatures on the sides of the nozzle. These fins allow the nozzle to be touched with hands even while the dryer is in use and reduce the risk of damaging surfaces when the dryer is laid down. They can also be used as a pic to improve control over hair strands.

The BABYLISS PRO 4RTISTS FXBDR1E must be kept clean to ensure proper performance. To clean the unit:

1. Unplug the cord and allow the dryer to cool completely.

2. Use a small brush or a vacuum cleaner brush attachment to remove dust and lint from the air intake openings.

3. Wipe the outer surface with a cloth only.

4. To clean the internal mesh screen: Remove the intake filter from the back of the dryer by twisting it counterclockwise.

5. Reach through the opening and press the mesh screen to release it from the filter.

6. Visually inspect the filter for hair. Rinse the mesh screen ONLY under running water to clear debris. For difficult buildup, use a stiff bristle brush.

7. Ensure the mesh screen is completely dry and free of debris. Place the screen back into the bottom part of the removable intake filter.

8. Press with your finger around the edge of the screen to lock it back into place.

If the BABYLISS PRO 4RTISTS FXBDR1E overheats, an automatic safety device will shut the dryer or the heat off. If this happens, turn the dryer off and unplug the power cord. Allow the dryer to cool for 10 to 15 minutes before restarting. Always ensure the air vents are clean before turning the device back on.