FREE ENGLISH AUTOMATIONDIRECT C-MORE EA9-T7CL-R (01) PDF DOCUMENT.
FREE ENGLISH AUTOMATIONDIRECT C-MORE EA9-T7CL-R (01) PDF USER GUIDE.
FREE ENGLISH AUTOMATIONDIRECT C-MORE EA9-T7CL-R (01) PDF USER MANUAL.
FREE ENGLISH AUTOMATIONDIRECT C-MORE EA9-T7CL-R (01) PDF OWNER GUIDE.
FREE ENGLISH AUTOMATIONDIRECT C-MORE EA9-T7CL-R (01) PDF OWNER MANUAL.
FREE ENGLISH AUTOMATIONDIRECT C-MORE EA9-T7CL-R (01) PDF REFERENCE GUIDE.
FREE ENGLISH AUTOMATIONDIRECT C-MORE EA9-T7CL-R (01) PDF INSTRUCTION GUIDE.
FREE ENGLISH AUTOMATIONDIRECT C-MORE EA9-T7CL-R (01) PDF REFERENCE MANUAL.
FREE ENGLISH AUTOMATIONDIRECT C-MORE EA9-T7CL-R (01) PDF INSTRUCTION MANUAL.
FREE ENGLISH AUTOMATIONDIRECT C-MORE EA9-T7CL-R (01) PDF OPERATING INSTRUCTIONS.
CLICK HERE TO DOWNLOAD AUTOMATIONDIRECT C-MORE EA9-T7CL-R (01) PDF DOCUMENT
If this is not the document you want for this product, click here to see if we have any other documents for this product.
How to use the PDF below:
* Touchscreen: Swipe up/down with-in the PDF to scroll and pinch or spread with two fingers to zoom.
* Mouse: While your mouse is hovering over the PDF, use the mouse wheel to scroll and click on the – / + buttons at the bottom of the PDF to zoom.
What should I do when I unpack my AUTOMATIONDIRECT C-MORE EA9-T7CL-R?
You should inspect all equipment for completeness. The package should include the following items:
• Quick Start Guide
• C-more Panel
• Gasket
• DC power connector
• Mounting Clips
If anything is missing or damaged, you should immediately contact the AutomationDirect returns department.
How do I provide power to the AUTOMATIONDIRECT C-MORE EA9-T7CL-R?
There are two methods to provide power to the AUTOMATIONDIRECT C-MORE EA9-T7CL-R panel: AC wiring or DC wiring.
AC Wiring
1. Install a C-more AC/DC Power Adapter (p/n EA-AC) to the rear of the touch panel.
2. Wire an AC voltage source of 100-240 VAC, 50/60 Hz, to its AC connector.
3. It is recommended to use a 3.0A time delay AC supply fuse (ADC p/n: MDL3).
4. Turn on the power source and check the LED status indicators on the front and rear of the panel for proper indication.
The tightening torque specifications for the EA-AC adapter are as follows:
| Part | Torque Specification |
|---|---|
| Power supply cable torque | 71-85 oz-in (0.5-0.6 Nm) |
| Power connector mounting torque | 71-85 oz-in (0.5-0.6 Nm) |
| Mounting flange screw torque | 57-71 oz-in (0.4-0.5 Nm) |
DC Wiring
1. Wire a dedicated 12-24 VDC power source to the DC connector on the rear of the panel.
2. Include wiring for the ground terminal to a proper equipment ground.
3. The recommended DC supply fuse for 6″ – 10″ panels is 2.5 A (ADC p/n: MDL2-5).
4. Turn on the power source and check the LED status indicators.
Note: Use 60 / 75°C copper conductors only, 12 – 24 AWG.
The tightening torque specifications for the DC connector are as follows:
| Part | Torque Specification |
|---|---|
| Power connector screw torque | 70.4 oz-in (0.5 Nm) |
| Power connector mounting torque | 56 oz-in (0.4 Nm) |
What do the status LEDs on the AUTOMATIONDIRECT C-MORE EA9-T7CL-R indicate?
The LEDs on the rear and front of the AUTOMATIONDIRECT C-MORE EA9-T7CL-R indicate its operational status.
CPU Status LED (Green, Orange & Red) – Rear Panel
| LED State | Status |
|---|---|
| Off | Power Off |
| Green | Normal – CPU Run State |
| Red | Memory Error |
| Blinking Red | Watchdog Timer Error |
| Blinking Orange | OS Error |
| Blinking Green | Power Loss Detection |
Power LED – Front Panel
| Color | On | Off |
|---|---|---|
| Green | Power On | Power Error |
What are the technical specifications for the AUTOMATIONDIRECT C-MORE EA9-T7CL-R?
| Specification | Value |
|---|---|
| Power Consumption | 18.0 W (1.50A @ 12 VDC, 0.75A @ 24 VDC) |
| Internal Fuse (non-replaceable) | 6.3A |
| Altitude | Up to 2000m (6562 ft) |
| Operating Temperature | 0 to 50 °C (32 to 122 °F) |
| Storage Temperature | -20 to +60 °C (-4 to +140 °F) |
| Humidity | 5-95% RH (non-condensing) |
| Environment | For use in Pollution Degree 2 environment, no corrosive gases permitted |
| Withstand Voltage | 1000 VAC, 1 min. (FG to Power supply) |
| Insulation Resistance | > 10M ohm @ 500V DC (FG to Power supply) |
| Vibration | IEC60068-2-6 (Test Fc) |
| Shock | IEC60068-2-27 (Test Ea) |
| Emission | EN55011 Class A (Radiated RF emission) |
| Enclosure | NEMA 250 type 4/4X indoor use only UL50 type 4X indoor use only IP65 indoor use only (not tested by UL) (When mounted correctly) |
| Agency Approvals | UL61010, E157382 CE (EN61131-2), RoHS (2011/65/EU) CUL Canadian C22.2 |
How do I mount the AUTOMATIONDIRECT C-MORE EA9-T7CL-R panel into an enclosure?
To mount the AUTOMATIONDIRECT C-MORE EA9-T7CL-R, you must first create a cutout in your enclosure according to the dimensions below. Then, secure the panel using the provided mounting clips.
Cutout Dimensions
| Model | A | B | D (Cutout) | E (Cutout) | J |
|---|---|---|---|---|---|
| EA9-T7CL-R | 8.08 in [205.2 mm] | 6.13 in [155.8 mm] | 7.46 in [189.5 mm] | 5.51 in [140.0 mm] | 0.31 in [7.9 mm] |
Mounting Clip and Torque Information
| Touch Panel Size | Enclosure Thickness Range | Mounting Clip Screw Torque | Material |
|---|---|---|---|
| 7″ | 0.039 – 0.20 inch [1 – 5 mm] | 63 – 77 oz-in [0.45 – 0.55 Nm] | Metal |
What are the installation clearance and orientation requirements for the AUTOMATIONDIRECT C-MORE EA9-T7CL-R?
Clearance: The mounting clearances when installing the touch panel in an enclosure or cabinet shall be a minimum of 4 inches from the top, bottom and sides and 1.72 inches from the rear.
Orientation/Derating: The AUTOMATIONDIRECT C-MORE EA9-T7CL-R may be mounted at any angle without derating consideration.
How should I clean and operate the touchscreen of the AUTOMATIONDIRECT C-MORE EA9-T7CL-R?
Cleaning Instructions
The display screen should be cleaned periodically by wiping it with a lint-free damp cloth using a mild soap solution. Use a dry or slightly dampened cloth to wipe any dirt from the labels on the back of the panel. Dry all surfaces with a lint-free cloth. Do not clean with ammonia-based products which are solvents and will damage the face of the panel and the labels.
Touchscreen Operation
The touchscreen is designed to respond to a single touch. If it is touched at multiple points at the same time, an unexpected object may be activated.
What are the UL Satisfaction Input Ratings for the AUTOMATIONDIRECT C-MORE EA9-T7CL-R?
The UL satisfaction ratings and related requirements are as follows:
• Input Rating: 12 – 24 VDC, Class 2, SELV or LEC, Maximum 18.0W
• Terminal connecting wire size: 12 – 24 AWG
• Connecting torque: 71 – 85 oz-in (5 – 7 lbf-in) (0.5 – 0.6 Nm)
• Surrounding Air Temperature rating: 0 to 50°C (32 to 122°F)
• For use in Pollution Degree 2 environment
• All interface ports are intended to be directly connected to an isolated secondary circuit
• For use on a flat surface of a type 4X Indoor Use Only enclosure
What are the primary safety warnings I should be aware of when installing and operating the AUTOMATIONDIRECT C-MORE EA9-T7CL-R?
To minimize the risk of potential safety problems, you should follow all applicable local and national codes that regulate the installation and operation of your equipment. It is your responsibility to determine which codes should be followed and to verify that the equipment, installation, and operation are in compliance with the latest revision of these codes.
Failure to follow all applicable codes and standards can result in equipment damage or serious injury to personnel.
If the equipment is used in a manner not specified by the manufacturer, the protection provided by the equipment may be impaired.
CLICK HERE TO DOWNLOAD AUTOMATIONDIRECT C-MORE EA9-T7CL-R (01) PDF DOCUMENT