FREE ENGLISH AUTOMATIONDIRECT C-MORE EA9-T12CL (01) PDF DOCUMENT.
FREE ENGLISH AUTOMATIONDIRECT C-MORE EA9-T12CL (01) PDF USER GUIDE.
FREE ENGLISH AUTOMATIONDIRECT C-MORE EA9-T12CL (01) PDF USER MANUAL.
FREE ENGLISH AUTOMATIONDIRECT C-MORE EA9-T12CL (01) PDF OWNER GUIDE.
FREE ENGLISH AUTOMATIONDIRECT C-MORE EA9-T12CL (01) PDF OWNER MANUAL.
FREE ENGLISH AUTOMATIONDIRECT C-MORE EA9-T12CL (01) PDF REFERENCE GUIDE.
FREE ENGLISH AUTOMATIONDIRECT C-MORE EA9-T12CL (01) PDF INSTRUCTION GUIDE.
FREE ENGLISH AUTOMATIONDIRECT C-MORE EA9-T12CL (01) PDF REFERENCE MANUAL.
FREE ENGLISH AUTOMATIONDIRECT C-MORE EA9-T12CL (01) PDF INSTRUCTION MANUAL.
FREE ENGLISH AUTOMATIONDIRECT C-MORE EA9-T12CL (01) PDF OPERATING INSTRUCTIONS.
CLICK HERE TO DOWNLOAD AUTOMATIONDIRECT C-MORE EA9-T12CL (01) PDF DOCUMENT
If this is not the document you want for this product, click here to see if we have any other documents for this product.
How to use the PDF below:
* Touchscreen: Swipe up/down with-in the PDF to scroll and pinch or spread with two fingers to zoom.
* Mouse: While your mouse is hovering over the PDF, use the mouse wheel to scroll and click on the – / + buttons at the bottom of the PDF to zoom.
What should I do when I first unpack my AUTOMATIONDIRECT C-MORE EA9-T12CL?
Upon unpacking your AUTOMATIONDIRECT C-MORE EA9-T12CL, you should inspect all equipment for completeness. The package should contain:
• Quick Start Guide
• Cutout Template*
• C-more Panel
• Gasket
• DC power connector
• Mounting Clips
• Logo Label*
*Not included with EA9-T7CL-R and EA9-T7CL.
If anything is missing or damaged, you should immediately contact the returns department.
How do I provide DC power to the AUTOMATIONDIRECT C-MORE EA9-T12CL?
To provide DC power to your AUTOMATIONDIRECT C-MORE EA9-T12CL, follow these steps:
1. Wire a dedicated 12-24 VDC power source to the DC connector on the rear of the C-more touch panel.
2. Include wiring for the ground terminal to a proper equipment ground.
3. Turn on the power source and check the LED status indicators on the front and rear of the C-more touch panel for proper indication.
Use 60 / 75°C copper conductors only, 12-24 AWG.
The recommended DC supply fuse for the 12″ & 15″ models is 4.0 A (ADC p/n: MDL4).
DC-CON Tightening Torque:
| Power connector screw torque | 70.4 oz-in (0.5 Nm) |
| Power connector mounting torque | 56 oz-in (0.4 Nm) |
How do I provide AC power to the AUTOMATIONDIRECT C-MORE EA9-T12CL?
To provide AC power, you must use the optional C-more AC/DC Power Adapter (p/n EA-AC). Follow these steps:
1. Install the C-more AC/DC Power Adapter to the rear of the touch panel.
2. Wire an AC voltage source of 100-240 VAC, 50/60 Hz, to its AC connector.
3. Turn on the power source and check the LED status indicators on the front and rear of the panel for proper indication.
The recommended AC supply fuse is a 3.0A time delay fuse (ADC p/n: MDL3).
EA-AC Tightening Torque:
| Power supply cable torque | 71-85 oz-in (0.5-0.6 Nm) |
| Power connector mounting torque | 71-85 oz-in (0.5-0.6 Nm) |
| Mounting flange screw torque | 57-71 oz-in (0.4-0.5 Nm) |
What do the CPU Status LED colors indicate on the AUTOMATIONDIRECT C-MORE EA9-T12CL?
The CPU Status LED on the rear of the AUTOMATIONDIRECT C-MORE EA9-T12CL can be Green, Orange, or Red. The status indications are as follows:
| Color/State | Status |
|---|---|
| Off | Power Off |
| Green | Normal – CPU Run State |
| Red | Memory Error |
| Blinking Red | Watchdog Timer Error |
| Blinking Orange | OS Error |
| Blinking Green | Power Loss Detection |
What does the Power LED on the front of the AUTOMATIONDIRECT C-MORE EA9-T12CL indicate?
The Power LED on the front of the panel indicates the power status:
| Color | On | Off |
|---|---|---|
| Green | Power On | Power Error |
What are the installation and mounting requirements for the AUTOMATIONDIRECT C-MORE EA9-T12CL?
When installing the AUTOMATIONDIRECT C-MORE EA9-T12CL, ensure the following requirements are met:
Clearance: The mounting clearances when installing the touch panel in an enclosure or cabinet shall be a minimum of 4 inches from the top, bottom, and sides, and 1.72 inches from the rear.
Mounting Clip Screw Torque:
| Touch Panel Size | Enclosure Thickness Range | Mounting Clip Screw Torque | Material |
|---|---|---|---|
| 6″, 7″, 8″, 10″ and 12″ | 0.039 – 0.20 inch [1 – 5 mm] | 63 – 77 oz-in [0.45 – 0.55 Nm] | Metal |
| 10″W, 15″ | 92 – 106 oz-in [0.65 – 0.75 Nm] |
Derating: Other panels besides the EA9-T15CL may be mounted at any angle without derating consideration.
What are the cutout dimensions for the AUTOMATIONDIRECT C-MORE EA9-T12CL?
The cutout dimensions for installing the AUTOMATIONDIRECT C-MORE EA9-T12CL are as follows:
| Model | A | B | D | E | J |
|---|---|---|---|---|---|
| EA9-T12CL | 13.37 [339.6] | 11.02 [280.0] | 12.57 [319.3] | 10.22 [259.6] | 0.40 [10.2] |
All dimensions are in inches [mm].
What are the key specifications for the AUTOMATIONDIRECT C-MORE EA9-T12CL?
| Power Consumption | 21.0 W 1.75A @ 12 VDC 0.88A @ 24 VDC |
| Internal Fuse (non-replaceable) | 6.3A |
| Altitude | Up to 2000m (6562 ft) |
| Operating Temperature | 0 to 50 °C (32 to 122 °F); Surrounding Air Temperature and a range rating: 50 °C (122 °F) |
| Storage Temperature | -20 to +60 °C (-4 to +140 °F) |
| Humidity | 5-95% RH (non-condensing) |
| Environment | For use in Pollution Degree 2 environment, no corrosive gases permitted |
| Enclosure | NEMA 250 type 4/4X indoor use only UL50 type 4X indoor use only IP65 indoor use only (When mounted correctly) |
| Agency Approvals | UL508, E157382 CE (EN61131-2), RoHS (2011/65/EU) CUL Canadian C22.2 |
How should I clean and operate the touchscreen on the AUTOMATIONDIRECT C-MORE EA9-T12CL?
Cleaning:
The display screen should be cleaned periodically by wiping it with a lint-free damp cloth using a mild soap solution. Use a dry or slightly dampened cloth to wipe any dirt from the labels on the back of the panel. Dry all surfaces with a lint-free cloth. Do not clean with ammonia-based products which are solvents and will damage the face of the panel and the labels.
Operation:
The touchscreen is designed to respond to a single touch. If it is touched at multiple points at the same time, an unexpected object may be activated.
What are the UL satisfaction ratings for the AUTOMATIONDIRECT C-MORE EA9-T12CL?
The UL satisfaction ratings for the AUTOMATIONDIRECT C-MORE EA9-T12CL are as follows:
Input Ratings: 12 – 24 VDC, Class 2, SELV or LEC, Maximum 21.0W
Additional Ratings:
• Terminal connecting wire size 12 – 24 AWG
• Connecting torque 71 – 85 oz-in (5 – 7 lbf-in) (0.5 – 0.6 Nm)
• Surrounding Air Temperature rating 0 to 50°C (32 to 122°F)
• For use in Pollution Degree 2 environment
• All interface ports are intended to be directly connected to an isolated secondary circuit
• For use on a flat surface of a type 4X Indoor Use Only enclosure
What are the general safety warnings for the AUTOMATIONDIRECT C-MORE EA9-T12CL?
To minimize the risk of potential safety problems, you should follow all applicable local and national codes that regulate the installation and operation of your equipment. It is your responsibility to determine which codes should be followed and to verify that the equipment, installation, and operation are in compliance with the latest revision of these codes.
Equipment damage or serious injury to personnel can result from the failure to follow all applicable codes and standards.
If the equipment is used in a manner not specified by the manufacturer, the protection provided by the equipment may be impaired.
CLICK HERE TO DOWNLOAD AUTOMATIONDIRECT C-MORE EA9-T12CL (01) PDF DOCUMENT