TCL 50 PRO NXTPAPER 5G (01) PDF Document

To install a SIM card in your TCL 50 PRO NXTPAPER 5G, follow these steps:

1. Locate the SIM tray on the side of the device.

2. Insert the SIM ejector tool into the hole next to the tray to pop it out.

3. Place your Nano SIM card(s) into the designated slot(s) on the tray.

4. Carefully reinsert the tray into the device until it is secure.

To check for software updates on your TCL 50 PRO NXTPAPER 5G, go to Settings > System > System Update.

To back up your personal data to Google Drive on your TCL 50 PRO NXTPAPER 5G, follow these steps:

1. Go to Settings > System > Backup.

2. Select Back up to Google Drive and turn it on.

To perform a factory reset on your TCL 50 PRO NXTPAPER 5G, which will erase all data, follow these steps:

1. Go to Settings > System > Reset.

2. Select Erase all data (factory reset).

3. Touch the option to reset your device.

To find more information about labeling, such as the FCC ID, on your TCL 50 PRO NXTPAPER 5G, you can use one of the following methods:

Touch Settings > Regulatory & safety.

Alternatively, press *#07# on your device’s keypad.

The button on the top of the T-pen is a physical button that helps you connect it to, or extract it from, the protective case.

Please observe the following safety precautions when using your TCL 50 PRO NXTPAPER 5G:

• Do not use your device when a vehicle is not safely parked. Using a handheld device while driving is illegal in many countries.

• Comply with restrictions on use specific to certain places (hospitals, planes, gas stations, schools, etc.).

• Switch the device off before boarding an aircraft.

• Switch the device off when you are in health care facilities, except in designated areas.

• Switch the device off when you are near gas or flammable liquids. Strictly obey all signs and instructions in fuel depots, petrol stations, chemical plants, or potentially explosive atmospheres.

• Turn off your mobile or wireless device in blasting areas or where “two-way radios” or “electronic devices” must be turned off to avoid interference.

• Consult your doctor and the device manufacturer to determine if the operation of your device may interfere with your medical device. Keep the device at least 15 cm from any medical device like a pacemaker, hearing aid, or insulin pump.

• Do not let children use the device and/or its accessories without supervision.

• Do not use a damaged device, such as one with a cracked display or badly dented back cover, as it may cause injury.

• Do not sleep with the device on your person or in your bed. Do not place the device under a blanket, pillow, or under your body, especially when connected to the charger, as this may cause the device to overheat.

To reduce exposure to radio waves, it is recommended to:

– Use the device under good signal reception conditions as indicated on its screen (four or five bars).

– Use a hands-free kit.

– Make reasonable use of the device, particularly for children and adolescents, for example by avoiding night calls and limiting the frequency and duration of calls.

– Keep the device away from the belly of pregnant women or the lower abdomen of adolescents.

Do not allow your TCL 50 PRO NXTPAPER 5G to be exposed to adverse weather or environmental conditions such as moisture, humidity, rain, infiltration of liquids, dust, or sea air. The manufacturer’s recommended operating temperature range is 0°C (32°F) to 40°C (104°F). At over 40°C (104°F), the legibility of the device’s display may be temporarily impaired, but this is not serious.

The NXTPAPER technology display has the following characteristics:

• It avoids reflections and glare in sunlight by diffusing external light, delivering a real paper and matte experience. However, when direct sunlight is strong, this diffusion is at its maximum, and the viewing angle becomes narrower. If this happens, you need to adjust the viewing angle of the device to see the screen.

• It delivers a matte tactile feel, protecting against smudges or fingerprints and providing a paper-like matte effect texture with resistance.

• This screen surface is different from standard smartphone screens. Note that it does not admit tempered glass protection and is more vulnerable to scratches. It is recommended to avoid contact with other materials that can cause scratching.

To prevent possible hearing damage, do not listen at high volume levels for long periods. Exercise caution when holding your TCL 50 PRO NXTPAPER 5G near your ear while the loudspeaker is in use.

Please follow these battery safety guidelines:

• The battery of your product is not fully charged upon arrival. Please charge it first.

• Do not attempt to open the battery due to the risk of toxic fumes and burns.

• For a device with a non-removable battery, do not attempt to eject or replace the battery.

• Do not puncture, disassemble, or cause a short circuit in a battery.

• For a unibody device, do not attempt to open or puncture the back cover.

• Do not burn or dispose of a used battery or device in household rubbish or store it at temperatures above 60°C (140°F), as this can result in an explosion or leakage of flammable liquid or gas.

• Use only the battery for the purpose for which it was designed and recommended. Never use damaged batteries.

• Do not keep the device connected to the charger with a fully charged battery for a long period, as it can cause overheating and shorten battery life.

CAUTION: RISK OF EXPLOSION IF BATTERY IS REPLACED BY AN INCORRECT TYPE. DISPOSE OF USED BATTERIES ACCORDING TO THE INSTRUCTIONS.

The device, accessory, and battery must be disposed of in accordance with locally applicable environmental regulations. The symbol on your device, battery, and accessories indicates that these products must be taken to collection points at the end of their life, such as:

• Municipal waste disposal centers with specific bins for these types of equipment.

• Collection bins at points of sale.

They will then be recycled, preventing substances from being disposed of in the environment, so that their components can be reused.

The travel charger for your TCL 50 PRO NXTPAPER 5G has the following specifications:

• Input: 100-240V, 50/60Hz, 0.65A

• Output: 5.0V, 3.0A, 15W / 9.0V, 3.0A, 27W / 12.0V, 2.5A, 30W / 15.0V, 3.0A, 30W / 3.3V~11.0V, 3.0A, 33W

Home A.C. / Travel chargers will operate within the temperature range of 0°C (32°F) to 40°C (104°F).

To enjoy the experience of the Fast Charging technology (33W) supported by your TCL 50 PRO NXTPAPER 5G, please use a charger compatible with the PD 3.0 PPS protocol, like the one that came with the device. If you use any other charger not compatible with the PD 3.0 PPS protocol, the smartphone will not use the fast charging technology, and the charging duration may take longer.

If you suspect that your TCL 50 PRO NXTPAPER 5G is causing harmful interference to radio or television reception, which can be determined by turning the equipment off and on, you are encouraged to try to correct the interference by one or more of the following measures:

• Reorient or relocate the receiving antenna.

• Increase the separation between the equipment and receiver.

• Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.

• Consult the dealer or an experienced radio/TV technician for help.

The TCL 50 PRO NXTPAPER 5G has been tested and certified for use with hearing aids for some of the wireless technologies that it uses. However, there may be some newer wireless technologies used in this phone that have not been tested yet for use with hearing aids. It is important to try the different features of this phone thoroughly and in different locations, using your hearing aid or cochlear implant, to determine if you hear any interfering noise. Consult your service provider or the manufacturer of this phone for information on hearing aid compatibility. If you have questions about return or exchange policies, consult your service provider or retailer.