Free English LELO GIGI 3 (01) PDF document. Download the PDF, use the online viewer, or browse the FAQs for easy troubleshooting.
CLICK HERE TO DOWNLOAD LELO GIGI 3 (01) PDF DOCUMENT
If this is not the document you want for this product, click here to see if we have any other documents for this product.
How to use the PDF below:
* Touchscreen: Swipe up/down with-in the PDF to scroll and pinch or spread with two fingers to zoom.
* Mouse: While your mouse is hovering over the PDF, use the mouse wheel to scroll and click on the – / + buttons at the bottom of the PDF to zoom.
How do I unlock the LELO GIGI 3 before first use?
The pleasure object is locked for transportation. To unlock it, simply connect the charger. Alternatively, if the interface is locked, hold down the “+” and “-“ buttons at the same time for 3 seconds.
What safety precautions should be followed when using the LELO GIGI 3?
Please consult your healthcare provider with any questions or concerns you may have regarding your condition.
This product can be used by adults only. Keep out of reach of children.
People with reduced physical, sensory, or mental capabilities or lack of experience and knowledge should use the device only if they have been given supervision or instruction concerning its safe use and understand the hazards involved.
Only use the product for the intended purpose. Sharing sex toys with other people may transmit sexual diseases. Do not share your sex toys with people other than your partner.
Use protective measures with your partner if necessary.
Do not use the product if you detect any cracks or signs of degradation on the covering material.
Do not keep your product on absorbent surfaces to prevent stains. If your product operates abnormally, turn it off.
Do not use the product if one or more components are damaged.
How do I operate the LELO GIGI 3 without using the app?
Before the first use, charge your LELO GIGI 3 for 2 hours.
Press the + or the (()) button to turn it on.
Press the (()) button to switch between 8 modes.
Use the + and the – buttons to increase or decrease the intensity.
Press and hold the (()) button to simply turn off the device, or use the + and – buttons simultaneously to turn it off and lock it as well.
How do I connect and use the LELO GIGI 3 with the LELO app?
Before the first use, charge your LELO GIGI 3 for 2 hours.
Download the iOS or Android version of the app.
Press the (()) button for 3 seconds to turn it on while activating the Bluetooth.
All the LED lights will blink simultaneously, showing the Bluetooth pairing.
Open the app and locate the toy icon at the bottom of the screen. Find your LELO GIGI 3 and select “Connect”. Press and hold the button on your device. Confirm the connection by pressing the button on your product again.
Go to “MY LELO TOYS” and select “PLAY”.
Choose between 3 different regular modes: Manual, Screw, Shake, or 2 additional advanced modes: Finish Me Off and Out Of Control.
Go to “SETTINGS” to set your device according to your preferences.
Click the “SAVE” button at the bottom of your screen to save settings for offline use.
Use the drop-down menu to set the default auto power off to 10-20 minutes. The battery level is in the upper left corner.
Where should the LELO GIGI 3 be placed on the body?
The device is designed to interact with the Clitoris, Outer labia, Inner labia, and Vagina.
Tip: For an even more pleasurable sensation, apply a liberal amount of LELO Personal Moisturizer to your body and to the LELO GIGI 3 before and during use.
Does the LELO GIGI 3 have an automatic shutdown feature?
Yes, keep in mind that after 20 minutes of inactivity, the LELO GIGI 3 will initiate automatic shutdown to save battery.
How do I charge the LELO GIGI 3?
Insert the DC plug into the DC port at the base of your LELO GIGI 3.
Insert the mains plug into a USB Port. The LED on the interface of your LELO GIGI 3 will pulse to indicate it is charging. When it is fully charged, the LED will emit a steady glow. When the battery is running low, the LED on your LELO GIGI 3 will emit a blinking white light.
Only use the original chargers provided by LELO with your LELO GIGI 3.
How should I clean and store the LELO GIGI 3?
Using LELO GIGI 3 with hand creams or silicone-based lubricants may make the silicone permanently tacky.
The device is fully waterproof, making cleaning simple. Rinse and spray with LELO Toy Cleaner, then rinse again and allow it to dry.
Always clean your LELO GIGI 3 thoroughly before and after each use. You can wash the silicone with warm water and antibacterial soap, rinse with clean hot water, and pat dry with a lint-free cloth or towel. Never use cleansers containing alcohol, petrol, or acetone.
Avoid leaving your LELO GIGI 3 in direct sunlight, and NEVER expose it to extreme heat.
Store your LELO GIGI 3 in a dust-free place and keep it away from products or other materials.
What should I do if the LED on my LELO GIGI 3 does not pulse when the charger is connected?
The battery is drained and will require several minutes to acknowledge that it is being charged.
The charger is not properly connected. Check wall and DC sockets.
What should I do if my LELO GIGI 3 does not activate when the button is pressed?
The battery is empty. Recharge your LELO GIGI 3.
The interface of your LELO GIGI 3 is locked. Hold down the “+” & “-“ buttons at the same time for 3 seconds.
What are the technical specifications of the LELO GIGI 3?
Materials: Body-safe silicone, ABS plastic
Finish: Smooth
Size: 163 x 35 x 42mm / 6.42 x 1.38 x 1.65 in
Insertable length: 90 mm / 3.54 in
Weight: 87 g / 3.07 oz
Battery: Li-Ion 420 mAh 3.7 V
Charging: Up to 2 h at 5V 420mA
Rated Power: Input: 5V 420mA 2.1W; Output: 3.7V 600mA 2.22W
User time: Up to 2 h
Standby: 90 days
Frequency: 100 Hz
Max. noise level: <60 dB
Interface: 3 buttons
CLICK HERE TO DOWNLOAD LELO GIGI 3 (01) PDF DOCUMENT