Free English SATISFYER TRAVELER (01) PDF document. Download the PDF, use the online viewer, or browse the FAQs for easy troubleshooting.
CLICK HERE TO DOWNLOAD SATISFYER TRAVELER (01) PDF DOCUMENT
If this is not the document you want for this product, click here to see if we have any other documents for this product.
How to use the PDF below:
* Touchscreen: Swipe up/down with-in the PDF to scroll and pinch or spread with two fingers to zoom.
* Mouse: While your mouse is hovering over the PDF, use the mouse wheel to scroll and click on the – / + buttons at the bottom of the PDF to zoom.
How do I turn the SATISFYER TRAVELER on and off?
To turn the SATISFYER TRAVELER on or off, press and hold the control button for 2 seconds.
How do I change the vibration modes on the SATISFYER TRAVELER?
Once the device is turned on, press the button 1 time (1x) to cycle through the different vibration modes. There are 11 modes (1-11) available.
How do I charge the SATISFYER TRAVELER?
The SATISFYER TRAVELER is rechargeable. Follow these steps to charge it:
1. Use only the enclosed USB charging cable.
2. Dock the cable with both magnetic contacts onto the metal contact points on the toy intended for this purpose.
3. If the charging cable does not adhere to the contact points by itself, connect it to the electrical supply and wait a moment. The magnetic effect will reactivate, and the contacts will connect automatically.
Note: The device must be fully charged before first use. The first charge can take up to eight hours.
What do the light indicators mean when charging the SATISFYER TRAVELER?
The light indicators provide the status of the battery during charging:
Flashing light: The battery is currently charging.
Light on (steady): The battery is fully charged.
How long does it take to charge the SATISFYER TRAVELER and how long does it last?
Charging Time: Approximately 4 hours (First charge may take up to 8 hours).
Operating Time: Approximately 60 minutes.
What are the technical specifications of the SATISFYER TRAVELER?
| Materials | Silicone, ABS |
| Storage Temperature | -5°C – +60°C |
| Maximum Charging Current | 500 mA |
| Battery | Li-Ion 3.7V |
| Battery Capacity | 450 mAh |
| Charging Voltage | 5V |
| Interface | USB |
How should I clean the SATISFYER TRAVELER?
To clean the SATISFYER TRAVELER:
1. Disconnect the charging cable from the electrical supply.
2. Separate the toy from the charging cable.
3. Clean the toy using a toy cleaner or water and soap.
What safety precautions should be followed regarding piercings or injuries when using the SATISFYER TRAVELER?
Remove piercings or jewellery in the genital area before use. Do not use the toy on irritated or damaged skin. Stop using the toy if you experience pain or feel unwell during use.
When should I stop using the SATISFYER TRAVELER due to damage or malfunction?
Do not use the toy if it is:
1. Unusually hot.
2. Damaged or deformed.
3. Discoloured.
Is the SATISFYER TRAVELER safe to use with a pacemaker?
No. Magnetic fields can influence mechanical and electronic components such as pacemakers. Do not use the product directly over a pacemaker. Contact your doctor for more information.
What are the environmental and usage warnings for the SATISFYER TRAVELER?
Fire/Inflammation: Do not extinguish the product with water. Do not throw the product into fire.
Defective Batteries: Improper handling can cause uncontrolled exothermic reactions. Dispose of the entire product immediately in an appropriate manner if this occurs.
Children: Keep the toy out of the reach of children.
Magnetic Fields: Keep cards with magnetic stripes (such as credit cards) away from the product, as they may be damaged by the product’s magnet.
Ambient Temperatures: Changing ambient temperatures (e.g., after transport) can lead to condensation. Do not use the toy until it has adapted to the new ambient temperature.
Overcharging: Disconnect the charging cable from the electrical supply after each charge.
CLICK HERE TO DOWNLOAD SATISFYER TRAVELER (01) PDF DOCUMENT