Free English LELO TIANI 3 (01) PDF document. Download the PDF, use the online viewer, or browse the FAQs for easy troubleshooting.
CLICK HERE TO DOWNLOAD LELO TIANI 3 (01) PDF DOCUMENT
If this is not the document you want for this product, click here to see if we have any other documents for this product.
How to use the PDF below:
* Touchscreen: Swipe up/down with-in the PDF to scroll and pinch or spread with two fingers to zoom.
* Mouse: While your mouse is hovering over the PDF, use the mouse wheel to scroll and click on the – / + buttons at the bottom of the PDF to zoom.
How do I get started with my LELO TIANI 3?
Before enjoying your LELO TIANI 3, charge it for 2 hours. Once charged, unlock the interface by pressing and holding the + and – buttons simultaneously until the indicator light turns solid. Your LELO TIANI 3 is now ready for use. To turn off your LELO TIANI 3, hold the O button until the light turns off.
How do I charge my LELO TIANI 3?
Insert the DC plug of the charger into the DC port at the base of your LELO TIANI 3. Plug the mains plug into a wall socket. The indicator light on your LELO TIANI 3 will pulse to indicate that it is charging. When it is fully charged, the indicator light will emit a steady glow. Remove the mains plug from the wall socket and the DC plug from your LELO TIANI 3.
How do I use my LELO TIANI 3?
To turn ON your LELO TIANI 3, press the O button. Press the + button to increase the vibration strength. Press the – button to decrease the vibration strength. Press the O button to cycle through the vibration programs.
How do I lock my LELO TIANI 3 for travel?
Press and hold the + and – buttons simultaneously for 3 seconds. The lights will flash once. Your LELO TIANI 3 is now locked and ready for travel.
How do I unlock my LELO TIANI 3 for travel?
Press and hold the + and – buttons simultaneously for 3 seconds. The lights will flash once. Your LELO TIANI 3 is now unlocked and ready for use.
How do I clean my LELO TIANI 3?
Wash your LELO TIANI 3 before and after each use with LELO Toy Cleaner or soap and water, and allow it to air dry. You can also use a lint-free cloth or towel.
What should I do if my LELO TIANI 3 is not turning on?
Charge your LELO TIANI 3. The indicator light will pulse to indicate it is charging. If it is fully charged, the indicator light will emit a steady glow. If the indicator light does not appear, or the device does not turn on, refer to the full Warranty information.
What should I do if my LELO TIANI 3 cannot be charged?
If the LELO TIANI 3 is fully charged, the indicator light will emit a steady glow. If it is not charging, refer to the full Warranty information.
What are the specifications of the LELO TIANI 3?
Here are the specifications for the LELO TIANI 3:
Materials: Body-safe silicone, ABS plastic
Interface: 3-button interface
Finish: Smooth
Size: 77 x 45 x 32 mm / 3 x 1.7 x 1.2 in.
Weight: 45 g / 1.6 oz.
Battery: Li-Ion 3.7 V 200 mAh
Charging: 5.0 V 500 mA
Normal Use: Up to 2 hours
Standby: Up to 90 days
Frequency: 120 Hz
Max. Noise Level: 50 dB
CLICK HERE TO DOWNLOAD LELO TIANI 3 (01) PDF DOCUMENT