Free English LELO TIANI DUO (01) PDF document. Download the PDF, use the online viewer, or browse the FAQs for easy troubleshooting.
CLICK HERE TO DOWNLOAD LELO TIANI DUO (01) PDF DOCUMENT
If this is not the document you want for this product, click here to see if we have any other documents for this product.
How to use the PDF below:
* Touchscreen: Swipe up/down with-in the PDF to scroll and pinch or spread with two fingers to zoom.
* Mouse: While your mouse is hovering over the PDF, use the mouse wheel to scroll and click on the – / + buttons at the bottom of the PDF to zoom.
How do I get started with the LELO TIANI DUO?
Before enjoying your LELO TIANI DUO for the first time, charge it for 2 hours. When it is fully charged, press the + button to turn on and increase vibration. Press the – button to decrease vibration. Press the ( ) button to cycle through the 8 vibration patterns. Press and hold the ( ) button to turn off. To lock the LELO TIANI DUO for travel, hold the + and – buttons until the travel lock indicator lights up. To unlock, hold them again until the light turns off.
How do I charge my LELO TIANI DUO?
Insert the DC plug into the charging port on the LELO TIANI DUO. Insert the USB plug into a USB port on your computer or a USB charger. The LED on your LELO TIANI DUO will pulse to indicate it is charging. When it is fully charged, the LED will emit a steady glow. When the battery is low, the LED on your LELO TIANI DUO will emit a dim, pulsing light.
How can I connect the LELO TIANI DUO with its remote control?
Your LELO TIANI DUO and its remote control are paired at the factory. If they become unpaired, you can re-pair them by simultaneously holding the ( ) button on both the LELO TIANI DUO and the remote for 5 seconds until the LEDs on both units light up and glow steadily. They are then paired.
How do I clean my LELO TIANI DUO?
Use a LELO-approved Personal Moisturizer or water-based lubricant to prepare your LELO TIANI DUO for use. To clean your LELO TIANI DUO, always wash it thoroughly with warm water and soap or a LELO-approved cleaning spray before and after each use. Avoid using cleansers containing alcohol, petrol, or acetone. Never expose your LELO TIANI DUO to direct sunlight or extreme heat.
What are the specifications of the LELO TIANI DUO?
Specifications of the LELO TIANI DUO are:
| Materials: | Body-safe silicone, ABS plastic |
| Finish: | Smooth |
| Size: | 78 x 43 x 32 mm / 3.07 x 1.69 x 1.26 in. |
| Weight: | 38 g / 1.34 oz. |
| Battery: | Li-Ion 70 mAh 3.7 V |
| Charging: | 2 hours at 5.0 V 70 mA |
| User Time: | Up to 2 hours |
| Standby: | 90 days |
| Frequency: | 900 MHz |
| Max. RF Power: | 1 mW |
| Interface: | 3-button interface |
CLICK HERE TO DOWNLOAD LELO TIANI DUO (01) PDF DOCUMENT