LELO TIANI HARMONY (02) PDF Document

Your LELO TIANI HARMONY has been locked for transportation. To unlock, simply connect the charger. Alternatively, verify if the interface is locked by holding down + and – for 5 seconds.

This device should be used by people aged 18 years and over.

People with reduced physical, sensory or mental capabilities or lack of experience and knowledge should use the device only if they have been given supervision or instruction concerning the use of the device in a safe way and understand the hazards involved.

Minors should not clean and/or use the device unsupervised.

Only use the product for the intended purpose. Sharing sex toys with other people may transmit sexual diseases. Do not share your sex toys with people other than your partner.

Use protective measures with your partner if necessary.

Do not use the product if you detect any cracks or signs of degradation on the covering material.

To prevent stains, do not keep your product on the absorbent surfaces. If your product operates abnormally, turn off and consult the support section.

Do not use the product if one or more components are damaged.

The LELO TIANI HARMONY is designed to be placed with the smaller vibrator tail inside the vagina, the larger vibrator head in contact with the clitoris, and the ring resting against the outer labia.

Before the first use, charge your LELO TIANI HARMONY for 2 hours.

Press the (( )) button to turn it on.

The LED lights will blink, showing the battery level.

The LED lights will go steady, showing the vibration level.

Press the (( )) button to switch between the modes that will be set to 100% intensity.

Press the center button for 3 seconds to turn it off.

Before the first use, charge your LELO TIANI HARMONY for 2 hours.

Download the IOS or ANDROID version of the app.

Press the (( )) button for 3 seconds to turn it on while activating the Bluetooth.

All the LED lights will blink simultaneously, showing the Bluetooth pairing.

Open the LELO APP and locate the toy icon on the bottom of the screen. Find your LELO TIANI HARMONY and select ‘’Connect’’. Press and hold the button on your device. Confirm the connection by pressing the button on your product again.

Go to ‘’MY LELO TOYS’’ and select ‘’PLAY’’.

Choose between three different control modes.

Select ‘’SETTINGS’’ to configure additional four modes.

To save your settings for offline use, select ‘’SAVE’’ at the bottom of your screen.

Use the drop-down menu to set the default auto power off from 10-20 minutes. You can check the battery level in the upper left corner.

Insert the DC plug into the DC port at the base of your LELO TIANI HARMONY.

Insert the mains plug into a USB Port.

Only use original chargers provided by LELO with your LELO TIANI HARMONY.

During charging, the LED on the interface will pulse to indicate it is charging.

When fully charged, the LED will emit a steady glow.

When the battery is running low, the LED will emit a blinking white light.

When turning the device on, blinking lights show the battery level.

During use, steady lights show the vibration level.

Simultaneously blinking lights indicate Bluetooth pairing.

Using LELO TIANI HARMONY with hand creams or silicone-based lubricants may make the silicone permanently tacky.

The device is fully waterproof. Rinse and spray with LELO Toy Cleaner, then rinse again and allow it to dry.

Always clean your LELO TIANI HARMONY thoroughly before and after each use. You can wash the silicone with warm water and antibacterial soap, rinse with clean hot water, and pat dry with a lint-free cloth or towel.

Never use cleansers containing alcohol, petrol, or acetone.

Avoid leaving your LELO TIANI HARMONY in direct sunlight and NEVER expose it to extreme heat.

Store your LELO TIANI HARMONY in a dust-free place and keep it away from products of other materials.

The battery may be drained and will require several minutes to acknowledge that it is being charged.

The charger may not be properly connected. Check wall and DC sockets.

The battery may be empty. Recharge your LELO TIANI HARMONY.

The interface of your LELO TIANI HARMONY may be locked. Hold down + and – for 5 seconds.