LELO HUGO 2 (01) PDF Document

Your pleasure object has been locked for transportation. To unlock, simply connect the charger.

Please observe the following safety guidelines:

• Please consult your healthcare provider with any questions or concerns you may have regarding your condition.

• This device should be used by people aged 18 years and over.

• People with reduced physical, sensory or mental capabilities or lack of experience and knowledge should use the device only if they have been given supervision or instruction concerning the use of the device in a safe way and understand the hazards involved.

• Minors should not clean and/or use the device unsupervised.

• Only use the product for the intended purpose. Sharing sex toys with other people may transmit sexual diseases. Do not share your sex toys with people other than your partner.

• Use protective measures with your partner if necessary.

• Do not use the product if you detect any cracks or signs of degradation on the covering material.

• To prevent stains, do not keep your product on the absorbent surfaces. If your product operates abnormally, turn off and consult the support section.

• Do not use the product if one or more components are damaged.

• Open the “LELO APP”

• Click “Menu”

• Click “Legal & Regulatory”

• Click “HUGO™ 2”

• FCC ID: “ZT5-HUGO”

• IC: “9798A-HUGO”

• HVIN: “HUGO™2”

• PMN: “Handheld massager”

• Before the first use, charge your LELO HUGO 2 for 2 hours.

• Press the (( )) button to turn it on.

• The LED lights will blink, showing the battery level.

• The LED lights will go steady, showing the vibration level.

• Press the (( )) button to switch between the modes that will be set to 100% intensity.

• Press the center button for 3 seconds to turn it off.

• Before the first use, charge your LELO HUGO 2 for 2 hours.

• DOWNLOAD THE IOS / ANDROID version.

• Press the (( )) button for 3 seconds to turn it on while activating the Bluetooth.

• All the LED lights will blink simultaneously, showing the Bluetooth pairing.

• Open the LELO™ APP and locate the toy icon on the bottom of the screen. Find your LELO HUGO 2 and select ‘’Connect’’. Press and hold the button on your device. Confirm the connection by pressing the button on your product again.

• Go to ‘’MY LELO TOYS’’ and select ‘’PLAY’’.

• Choose between 4 different control modes.

• Select ‘’SETTINGS’’ to configure additional 6 modes.

• To save your settings for offline use, select ‘’SAVE’’ at the bottom of your screen.

• Use the drop-down menu to set the default auto power off from 10-20 minutes.

• You can check the battery level in the upper left corner.

Yes, keep in mind that LELO HUGO 2 will initiate automatic shutdown every 20 minutes to ensure the motor doesn’t overheat if the product is misused.

For an even more pleasurable sensation, apply a liberal amount of LELO Personal Moisturizer to your body and to LELO HUGO 2 before and during use. Using LELO HUGO 2 with hand creams or silicone-based lubricants may make the silicone permanently tacky.

Only use original chargers provided by LELO with your LELO HUGO 2.

• Insert the DC plug into the DC port at the base of your LELO HUGO 2.

• Insert the mains plug into a USB Port. The LED on the interface of your LELO HUGO 2 will pulse to indicate it is charging.

• When it is fully charged, the LED will emit a steady glow.

• When the battery is running low, the LED on your LELO HUGO 2 will emit a blinking white light.

The LELO HUGO 2 is fully waterproof, making cleaning simple. Rinse and spray with LELO Toy Cleaner, then rinse again and allow it to dry.

Always clean your LELO HUGO 2 thoroughly before and after each use. You can wash the silicone with warm water and antibacterial soap, rinse with clean hot water, and pat dry with a lint-free cloth or towel.

Never use cleansers containing alcohol, petrol, or acetone.

Avoid leaving your LELO HUGO 2 in direct sunlight and NEVER expose it to extreme heat. Store your LELO HUGO 2 in a dust-free place and keep it away from products of other materials.

• The battery is drained and will require several minutes to acknowledge that it is being charged.

• The charger is not properly connected. Check wall and DC sockets.

• The battery is empty. Recharge your LELO HUGO 2.

• The interface of your LELO HUGO 2 is locked. Hold down (( )) for 3 seconds.

If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:

• Reorienting or relocating the receiving antenna.

• Increasing the separation between the equipment and receiver.

• Connecting the equipment into an outlet on a circuit different from that to which the receiver is connected.

• Consulting the seller, the device dealer or an experienced radio/TV technician for help.