Free English JVC KD-R860BT (01) PDF document. Download the PDF, use the online viewer, or browse the FAQs for easy troubleshooting.
CLICK HERE TO DOWNLOAD JVC KD-R860BT (01) PDF DOCUMENT
If this is not the document you want for this product, click here to see if we have any other documents for this product.
What are the general safety precautions for using the JVC KD-R860BT?
To ensure safe operation of your JVC KD-R860BT, please adhere to the following precautions:
Volume setting:
• Adjust the volume so that you can hear sounds outside the car to prevent accidents.
• Lower the volume before playing digital sources to avoid damaging the speakers by the sudden increase of the output level.
General:
• Do not operate any function that takes your attention away from safe driving.
• Avoid using the external device if it might hinder safe driving.
• Make sure all important data has been backed up. We shall bear no responsibility for any loss of recorded data.
• Never put or leave any metallic objects (such as coins or metal tools) inside the unit, to prevent a short circuit.
• If a disc error occurs due to condensation on the laser lens, eject the disc and wait for the moisture to evaporate.
How should I care for the remote control for my JVC KD-R860BT?
• Do not leave the remote control in hot places such as on the dashboard.
• The Lithium battery is in danger of explosion if replaced incorrectly. Replace it only with the same or equivalent type (CR2025).
• The battery pack or batteries shall not be exposed to excessive heat such as sunshine, fire or the like.
• Keep the battery out of reach of children and in its original packaging when not in use. Dispose of used batteries promptly. If swallowed, contact a physician immediately.
How do I clean and maintain my JVC KD-R860BT?
Cleaning the unit: Wipe off dirt on the faceplate with a dry silicone or soft cloth.
Cleaning the connector: Detach the faceplate and clean the connector gently with a cotton swab, being careful not to damage the connector.
What are the proper ways to handle discs with the JVC KD-R860BT?
• Do not touch the recording surface of the disc.
• Do not stick tape etc. on the disc, or use a disc with tape stuck on it.
• Do not use any accessories for the disc.
• Clean from the center of the disc and move outward.
• Clean the disc with a dry silicone or soft cloth. Do not use any solvents.
• When removing discs from this unit, pull them out horizontally.
• Remove burrs from the center hole and disc edge before inserting a disc.
How do I turn the JVC KD-R860BT on or off?
Press the SOURCE button to turn the power on.
Press and hold the SOURCE button to turn the power off.
How do I adjust or mute the volume on the JVC KD-R860BT?
Turn the volume knob to adjust the volume.
Press the volume knob to mute the sound or pause playback. Press the knob again to cancel the mute or pause.
How do I select a source on the JVC KD-R860BT?
• Press the SOURCE button repeatedly.
• Alternatively, press the SOURCE button, then turn the volume knob within 2 seconds to select your desired source.
How do I change the display information on the JVC KD-R860BT?
Press the DISP-SETUP button repeatedly to cycle through the available display information for the current source.
How do I reset the JVC KD-R860BT?
To reset the unit, first detach the faceplate. Then, use a pointed object like a pen tip to press the reset button. Note that performing a reset will erase your preset adjustments.
How do I replace the battery in the remote control for the JVC KD-R860BT?
The remote control (RM-RK52) uses one CR2025 lithium battery. To replace it, slide the battery tray out of the remote control body. Remove the old battery and insert the new one with the “+” side facing up. Slide the tray back into the remote until it locks into place.
How do I cancel the demonstration mode on the JVC KD-R860BT?
1. Press and hold DISP-SETUP.
2. Turn the volume knob to select [DEMO], then press the knob.
3. Turn the volume knob to select [DEMO OFF], then press the knob.
4. Press DISP-SETUP to exit.
How do I set the clock on the JVC KD-R860BT?
1. Press and hold DISP-SETUP.
2. Turn the volume knob to select [CLOCK], then press the knob.
3. Turn the volume knob to select [CLOCK SET], then press the knob.
4. Turn the volume knob to make the settings for Day → Hour → Minute, pressing the knob to confirm each one.
5. Turn the volume knob to select [24H/ 12H], then press the knob.
6. Turn the volume knob to select [12 HOUR] or [24 HOUR], then press the knob.
7. Press DISP-SETUP to exit.
How do I configure the basic settings on my JVC KD-R860BT?
1. Press and hold DISP-SETUP.
2. Turn the volume knob to make a selection from the table below, then press the knob.
3. Repeat step 2 until the desired item is selected or activated.
4. Press DISP-SETUP to exit.
| CATEGORY | ITEM | SELECTION |
|---|---|---|
| SETTINGS | BEEP | ON: Activates the keypress tone. ; OFF: Deactivates. |
| SRC SELECT AM | ON: Enables AM in source selection. ; OFF: Disables. | |
| SRC SELECT PANDORA | ON: Enables PANDORA in source selection. ; OFF: Disables. | |
| SRC SELECT IHEART | ON: Enables IHEARTRADIO in source selection. ; OFF: Disables. | |
| SRC SELECT AUX | ON: Enables AUX in source selection. ; OFF: Disables. | |
| F/W UPDATE | F/W xxxx | YES: Starts upgrading the firmware. ; NO: Cancels. |
| CLOCK | CLOCK SYNC | AUTO: The clock time is automatically set using the Clock Time (CT) data in FM Radio Broadcast Data System signal. ; OFF: Cancels. |
| CLOCK DISP | ON: The clock time is shown on the display even when the unit is turned off. ; OFF: Cancels. |
How do I play a CD, USB, iPod, or Android device on the JVC KD-R860BT?
Simply insert a disc with the label side facing up into the loading slot, or connect a USB device, iPod/iPhone, or Android device to the USB input terminal. The source will change automatically and playback will begin.
How do I control playback for CD/USB/iPod/Android on the JVC KD-R860BT?
| Action | Instruction on Faceplate |
|---|---|
| Reverse / Fast-forward | Press and hold the left or right arrow buttons. |
| Select a track/file | Press the left or right arrow buttons. |
| Select a folder (CD/USB only) | Press the 3 ▲ / 2 ▼ buttons. |
| Repeat play | Press the 5 button repeatedly to cycle through repeat modes (e.g., TRACK RPT, FOLDER RPT, RPT OFF). |
| Random play | Press the 4 button repeatedly to cycle through random modes (e.g., ALL RND, FOLDER RND, RND OFF). |
How do I select the control mode for an iPod or Android device on the JVC KD-R860BT?
For iPod/iPhone: While in iPod source, press the 6 USB MODE button repeatedly to switch between:
• HEAD MODE: Control from the JVC unit.
• IPHONE MODE: Control from the iPod/iPhone itself. (You can still play/pause or skip files from the unit).
For Android: While in ANDROID source, press the 6 USB MODE button repeatedly to switch between:
• AUTO MODE: Control from the unit using the JVC MUSIC PLAY application.
• AUDIO MODE: Control other media player applications from the Android device (without using the JVC app). (You can still play/pause or skip files from the unit).
How do I change the playback speed of an Audiobook from my iPod on the JVC KD-R860BT?
This is applicable while listening to an iPod with [HEAD MODE] selected.
1. Press and hold DISP-SETUP.
2. Turn the volume knob to select [IPOD], then press the knob.
3. Press the volume knob to select [AUDIOBOOKS].
4. Turn the volume knob to select a speed (0.5x SPEED / 1x SPEED / 2x SPEED), then press the knob.
5. Press DISP-SETUP to exit.
How can I find a specific file from a folder or list on my JVC KD-R860BT?
1. Press the search button (magnifying glass).
2. Turn the volume knob to select a folder/list, then press the knob.
3. Turn the volume knob to select a file, then press the knob.
Quick Search Feature:
• For MP3/WMA/AAC/WAV files: Turn the volume knob quickly to search rapidly.
• For iPod: You can search by the first character. Press 3 ▲ / 2 ▼ or turn the volume knob quickly to select the desired character (A to Z, 0 to 9, OTHERS) to jump to that section of the list.
How do I search for a radio station on my JVC KD-R860BT?
1. Press SOURCE repeatedly to select FM or AM.
2. To search for stations automatically, press the left or right arrow buttons.
3. To search for stations manually, press and hold the left or right arrow buttons until “M” flashes on the display, then press the buttons repeatedly to tune step-by-step.
How do I store a radio station in memory on the JVC KD-R860BT?
While listening to the station you wish to save:
• Press and hold one of the number buttons (1 to 6).
• Alternatively, press and hold the volume knob until “PRESET MODE” flashes. Turn the knob to select a preset number (1-18 for FM, 1-6 for AM), then press the knob. The preset number will flash and “MEMORY” will appear on the display.
How do I select a stored radio station on the JVC KD-R860BT?
You can press one of the number buttons (1 to 6) to recall the station stored there. Alternatively, press the search button, turn the volume knob to select a preset number, and press the knob to confirm.
How do I set the Radio Timer on the JVC KD-R860BT?
The Radio Timer turns on the radio at a specific time regardless of the current source.
1. Press and hold DISP-SETUP.
2. Turn the volume knob to select [TUNER], then press the knob.
3. Select [RADIO TIMER] and press the knob.
4. Select how often the timer will activate: [ONCE], [DAILY], [WEEKLY], or [OFF].
5. Select the source: [FM], [AM], or [SIRIUS XM].
6. Select the preset station you want to play.
7. Set the activation day (if you chose [ONCE] or [WEEKLY]) and the time.
A clock icon will light up on the display when the timer is set. The Radio Timer will not activate if the unit is turned off.
What are the advanced radio settings available on the JVC KD-R860BT?
| Setting | Description |
|---|---|
| SSM | (Strong-station Sequential Memory) Automatically presets up to 18 stations for FM. |
| IF BAND | AUTO: Increases tuner selectivity to reduce interference from adjacent stations (stereo effect may be lost). WIDE: Subjects to interference but sound quality and stereo effect remain. |
| MONO | ON: Improves FM reception, but the stereo effect will be lost. OFF: Cancels. |
| AREA | Selects the correct AM/FM tuning interval for your region (AREA US, AREA SA, AREA EU). |
| PTY SEARCH | (For FM source only) Searches for a station broadcasting a specific Program Type code (e.g., NEWS, ROCK, SPORTS). |
How do I connect and use a portable audio player with the AUX input on the JVC KD-R860BT?
1. Connect your portable audio player to the auxiliary input jack on the front of the unit using a 3.5 mm (1/8″) stereo mini plug.
2. Ensure [AUX] is set to [ON] in the [SRC SELECT] settings.
3. Press the SOURCE button repeatedly to select AUX.
4. Turn on your portable audio player and start playback.
How do I listen to Pandora on my JVC KD-R860BT?
First, install the latest version of the Pandora application on your device (iPhone/iPod touch or Android OS). For a wired connection, connect your iPhone/iPod touch to the USB terminal. For a wireless connection, pair your Android phone via Bluetooth.
1. Ensure [PANDORA] is set to [ON] in the [SRC SELECT] settings.
2. Open the Pandora application on your device.
3. The source will change to PANDORA and the broadcast will start automatically.
Pandora Controls:
• Playback / pause: Press the volume knob.
• Skip a track: Press the right arrow button.
• Thumbs up or thumbs down: Press the 3 ▲ / 2 ▼ buttons. (A thumbs down will skip the track).
How can I create and save a new Pandora station on my JVC KD-R860BT?
1. Press the search button.
2. Turn the volume knob to select [NEW STATION], then press the knob.
3. Turn the volume knob to select [FROM TRACK] or [FROM ARTIST] to create the station based on the current song, then press the knob.
4. To save the new station, press and hold number button 1, 4, 5, or 6.
How do I listen to iHeartRadio on my JVC KD-R860BT?
First, install the latest version of the iHeart Link for JVC application on your device (iPhone/iPod touch or Android OS). For a wired connection, connect your iPhone/iPod touch to the USB terminal. For a wireless connection, pair your Android phone via Bluetooth.
1. Ensure [IHEART] is set to [ON] in the [SRC SELECT] settings.
2. Open the iHeart Link application on your device.
3. Press the SOURCE button repeatedly to select IHEARTRADIO. The broadcast will start automatically.
How do I pair a Bluetooth device with my JVC KD-R860BT for the first time?
1. Press the SOURCE button to turn the unit on.
2. On your Bluetooth device, search for and select “JVC UNIT” from the list of available devices.
3. Follow the instructions that appear on the unit’s display and your Bluetooth device. Depending on your device, the process may vary:
• If a 6-digit passkey appears (e.g., “XXXXXX”), ensure that the same passkey is shown on your Bluetooth device, then press the volume knob to confirm on the unit and confirm on your device.
• If “PIN 0000” scrolls on the display, enter the PIN code “0000” into your Bluetooth device.
• If only “PAIRING” appears, operate your Bluetooth device to confirm the pairing.
Once pairing is complete, “PAIRING COMPLETED” appears and the Bluetooth icon on the display will light up.
How do I handle phone calls using the JVC KD-R860BT?
| Action | Instruction |
|---|---|
| Answer a call | Press the phone button or the volume knob. |
| Reject a call | Press and hold the phone button. |
| End a call | Press and hold the phone button. |
| Adjust phone volume | Turn the volume knob during a call. |
| Switch between hands-free and private talk modes | Press the volume knob during a call. |
How can I improve the voice quality during a hands-free call on my JVC KD-R860BT?
While on a call, you can adjust settings to improve clarity.
1. Press and hold DISP-SETUP.
2. Turn the volume knob to select an item from the table below, then press the knob.
3. Turn the volume knob to adjust the value, then press the knob.
4. Press DISP-SETUP to exit.
| Item | Value Range | Description |
|---|---|---|
| MIC LEVEL | -10 to +10 | Adjusts microphone sensitivity. Higher number is more sensitive. |
| NOISE RDCT | -5 to +5 | Adjusts the noise reduction level. |
| ECHO CANCEL | -5 to +5 | Adjusts the echo cancellation delay time. |
How do I make a call from my JVC KD-R860BT?
1. Press the phone button to enter Bluetooth mode.
2. Turn the volume knob to select a calling method:
• [RECENT CALL]: Select from a list of received, made, or missed calls.
• [PHONEBOOK]: Select a contact from your phone’s transferred phonebook.
• [DIAL NUMBER]: Manually enter a phone number.
3. Press the knob to confirm your selection.
4. Navigate to the desired contact or number, then press the volume knob to initiate the call.
How do I use voice recognition to make a call on the JVC KD-R860BT?
1. Press and hold the phone button to activate your connected phone’s voice recognition feature (e.g., Siri for iPhone).
2. When prompted, speak the name of the contact you wish to call or the voice command to control phone functions.
How can I play audio from my Bluetooth device through the JVC KD-R860BT?
1. Press the SOURCE button repeatedly to select BT AUDIO.
2. Start playback from your Bluetooth audio player.
You can control playback from the JVC unit:
• Playback / pause: Press the search button.
• Select group or folder: Press the 3 ▲ / 2 ▼ buttons.
• Reverse / Forward skip: Press the left or right arrow buttons.
How do I use the Bluetooth compatibility check mode on the JVC KD-R860BT?
This mode allows you to check the connectivity of supported profiles between a Bluetooth device and the unit.
1. Ensure no other Bluetooth device is paired. Press and hold the phone button.
2. “BLUETOOTH” ↔ “CHECK MODE” appears on the display.
3. On your Bluetooth device, search for and select “JVC UNIT” within 3 minutes.
4. Perform the pairing confirmation on your device.
5. After pairing, the unit will display the compatibility results for the connected profiles (e.g., “H.FREE OK”, “A.STREAM OK”, “PBAP OK”).
6. After 30 seconds, “PAIRING DELETED” appears, and the unit exits check mode.
How do I select or customize an equalizer setting on the JVC KD-R860BT?
To select a preset equalizer:
Press the EQ-EASY EQ button repeatedly to cycle through the available presets (FLAT, HARD ROCK, JAZZ, POP, R&B, TALK, USER1, USER2, VOCAL BOOST, BASS BOOST, CLASSICAL, DANCE).
To store your own sound settings (USER1 or USER2):
1. Press and hold EQ-EASY EQ.
2. Turn the volume knob to select [EASY EQ], then press the knob.
3. Turn the volume knob to select [USER1] or [USER2], then press the knob.
4. Turn the volume knob to select an element (e.g., SUB.W SP, BASS LVL, MID LVL, TRE LVL) and press the knob to adjust its value.
How do I adjust the subwoofer output on the JVC KD-R860BT?
You can adjust the subwoofer settings in the main settings menu.
1. Press and hold DISP-SETUP.
2. Turn the volume knob to access the audio settings, then make selections from the following options:
• SUB.W LEVEL: Adjusts the output level of the subwoofer.
• SUB.W: Turns the subwoofer output ON or OFF.
• SUB.W LPF: Sets the Low Pass Filter frequency (THROUGH, LOW 55HZ, MID 85HZ, HIGH 120HZ).
• SUB.W PHASE: Selects the phase of the subwoofer output (NORMAL 0° or REVERSE 180°). This is selectable only if a setting other than [THROUGH] is selected for the LPF.
How can I adjust the display brightness and color on my JVC KD-R860BT?
1. Press and hold DISP-SETUP.
2. Turn the volume knob to make a selection:
• [BRIGHTNESS]: Select [DAY] or [NIGHT]. Then, select a zone ([ALL ZONE], [ZONE 1], etc.) and set the brightness level from 00 to 31.
• [COLOR]: Select [PRESET]. Choose a zone to change, then select a preset color or color flow pattern.
• [DAY COLOR] / [NIGHT COLOR]: Create a custom color. Select a zone, then adjust the individual RED, GREEN, and BLUE levels from 00 to 31. Your custom color is stored to [USER] in the [PRESET] menu.
3. Press DISP-SETUP to exit.
Why can’t I hear any sound from my JVC KD-R860BT?
• Adjust the volume to the optimum level.
• Check the speaker cords and all other connections to ensure they are secure.
What does the “MISWIRING CHECK WIRING THEN PWR ON” message mean on my JVC KD-R860BT?
This message indicates a short circuit in the speaker wiring. Turn the power off immediately. Check that the terminals of the speaker wires are properly insulated and are not touching the vehicle’s chassis or each other. After correcting the wiring, turn the power on again.
Why won’t my JVC KD-R860BT eject a disc?
If a disc is stuck, press and hold the eject button to forcibly eject it. Be careful not to drop the disc when it comes out. You should also check the loading slot to make sure there are no obstructions.
Why does “READING” keep flashing on my JVC KD-R860BT when using a disc or USB?
This can occur if the media contains too many hierarchical levels and folders. Try simplifying the folder structure on your USB device.
You can also try reloading the disc or reattaching the USB device.
Why won’t my Android device play back audio through the JVC KD-R860BT?
• First, try reconnecting the Android device.
• If you are in [AUDIO MODE], launch a media player application on the Android device and start playback from the device.
• If you are in [AUTO MODE], make sure the JVC MUSIC PLAY APP is installed on the Android device and that the correct control mode is selected on the unit.
• Switch off the developer options on the Android device.
• Turn off the power saving mode on the Android device.
• If these steps do not solve the problem, the connected Android device may not support audio routing to the unit.
Why is there echo or noise during a Bluetooth phone call on my JVC KD-R860BT?
• Adjust the microphone unit’s position. Ensure it is placed securely and away from air vents.
• Check the [ECHO CANCEL] setting in the menu and adjust its level.
• Reduce the distance between the unit and the Bluetooth device.
• Move the car to a place where you can get a better signal reception.
Why is the sound from my Bluetooth audio player skipping on the JVC KD-R860BT?
• Reduce the distance between the unit and the Bluetooth audio player.
• Turn off, then turn on the unit and try to connect again.
• Other Bluetooth devices nearby might be trying to connect to the unit or causing interference.
What does “PAIRING FULL” mean on my JVC KD-R860BT?
This message indicates that the number of registered Bluetooth devices has reached its limit. To pair a new device, you must first delete an unnecessary device from the unit’s memory. This can be done in the Bluetooth settings under [DELETE PAIR].
How to use the PDF below:
* Touchscreen: Swipe up/down with-in the PDF to scroll and pinch or spread with two fingers to zoom.
* Mouse: While your mouse is hovering over the PDF, use the mouse wheel to scroll and click on the – / + buttons at the bottom of the PDF to zoom.
CLICK HERE TO DOWNLOAD JVC KD-R860BT (01) PDF DOCUMENT