HONOR LLY-LX2 (01) PDF Document

Before using your HONOR LLY-LX2, familiarize yourself with its basic operations:

• To power on your device, press and hold the power button until the screen turns on.

• To power off your device, press and hold the power button, and then touch the power off icon.

• To restart your device, press and hold the power button, and then touch the restart icon.

• To force restart your device, press and hold the Power and Volume down buttons for more than 10 seconds.

When getting your HONOR LLY-LX2 started, please observe the following precautions:

• Be careful not to scratch your device or hurt yourself when using the eject pin.

• Store the eject pin out of the reach of children to prevent accidental swallowing or injury.

• Do not use cut or modified SIM cards with your device as these may not be recognized and could damage the card tray (slot).

• If your SIM card does not match your device, please contact your carrier.

Follow the instructions in the figures in the user guide to set up your device. Please use the eject pin included. Ensure that the card is correctly aligned and that the card tray is level when you insert it into your device.

On your HONOR LLY-LX2, you can select the default mobile data card and calling card as needed. For details, check out the pre-installed Tips app.

Please note the following about 4G service:

• 4G service depends on the support of your network carrier and its deployment of relevant services. Please contact your carrier to activate 4G service.

• 4G service may be unavailable in certain areas due to network interference.

Please read all safety information carefully before using your HONOR LLY-LX2 to ensure its safe and proper operation.

• To prevent possible hearing damage, do not listen at high volume levels for long periods.

• Using an unapproved or incompatible power adapter, charger, or battery may damage your device, shorten its lifespan, or cause a fire, explosion, or other hazards.

• Ideal operating temperatures are 0 °C to 35 °C. Ideal storage temperatures are -20 °C to +45 °C.

• Pacemaker manufacturers recommend that a minimum distance of 15 cm be maintained between a device and a pacemaker to prevent potential interference. If using a pacemaker, hold the device on the side opposite the pacemaker and do not carry the device in your front pocket.

• Keep the device and the battery away from excessive heat and direct sunlight. Do not place them on or in heating devices, such as microwave ovens, stoves, or radiators.

• Observe local laws and regulations while using the device. To reduce the risk of accidents, do not use your wireless device while driving.

• While flying in an aircraft or immediately before boarding, only use your device according to instructions provided. Use of a wireless device in an aircraft may disrupt wireless networks, present a hazard to aircraft operation, or be illegal.

• To avoid damaging the internal circuit of the device or charger, do not use the device in a dusty, damp, or dirty place, or near a magnetic field.

• Do not use, store or transport the device where flammables or explosives are stored (in a gas station, oil depot, or chemical plant, for example). Using your device in these environments increases the risk of explosion or fire.

• Dispose of this device, the battery, and accessories according to local regulations. They should not be disposed of in normal household waste. Improper battery use may lead to fire, explosion, or other hazards.

• Please consult your doctor and the device manufacturer to determine if using your device may interfere with the operation of your medical device.

• Adhere to any rules or regulations set forth by hospitals and health care facilities.

When charging your HONOR LLY-LX2, make sure the power adapter is plugged into a socket near the devices and is easily accessible. Unplug the charger from electrical outlets and the device when not in use.

• Keep the battery away from fire, and do not disassemble, modify, throw, or squeeze it. Do not insert foreign objects into it, submerge it in water or other liquids, or expose it to external force or pressure, as this may cause the battery to leak, overheat, catch fire, or even explode.

• This device contains a built-in battery. Do not attempt to replace the battery by yourself. Otherwise, the device may not run properly or it may damage the battery. For your personal safety and to ensure that your device runs properly, you are strongly advised to contact an authorized service center for a replacement.

Power off your device in any area with a potentially explosive atmosphere, and comply with all signs and instructions. Areas that may have potentially explosive atmospheres include the areas where you would normally be advised to turn off your vehicle engine. Triggering of sparks in such areas could cause an explosion or a fire, resulting in bodily injuries or even deaths. Do not power on your device at refueling points such as service stations. Comply with restrictions on the use of radio equipment in fuel depots, storage, and distribution areas, and chemical plants. In addition, adhere to restrictions in areas where blasting operations are in progress. Before using the device, watch out for areas that have potentially explosive atmospheres that are often, but not always, clearly marked. Such locations include areas below the deck on boats, chemical transfer or storage facilities, and areas where the air contains chemicals or particles such as grain, dust, or metal powders. Ask the manufacturers of vehicles using liquefied petroleum gas (such as propane or butane) whether this device can be safely used in their vicinity.

The symbol on the product, battery, literature, or packaging means that the products and batteries should be taken to separate waste collection points designated by local authorities at the end of the lifespan. This will ensure that EEE waste is recycled and treated in a manner that conserves valuable materials and protects human health and the environment.

The World Health Organization has stated that exposure can be reduced by limiting your usage or simply using a hands-free kit to keep the device away from the head and body. Ensure that the device accessories, such as a device case and device holster, are not composed of metal components. Keep the device away from your body to meet the distance requirement.

For countries that adopted the SAR limit of 2.0 W/kg over 10 grams of tissue, the HONOR LLY-LX2 complies with RF specifications when used near your ear or at a distance of 0.50 cm from your body. The highest reported SAR value is: head SAR: 0.96 W/kg; body SAR: 1.25 W/kg.

The frequency bands and transmitting power (radiated and/or conducted) nominal limits applicable to this radio equipment are as follows: