HONOR X8B LLY-LX1 (01) PDF Document

To power on your HONOR X8b LLY-LX1, press and hold the power button until the screen turns on.

To power off your HONOR X8b LLY-LX1, press and hold the power button, and then touch the power off icon.

To restart your HONOR X8b LLY-LX1, press and hold the power button, and then touch the restart icon.

To force restart your HONOR X8b LLY-LX1, press and hold the Power and Volume down buttons for more than 10 seconds.

The main physical features of the HONOR X8b LLY-LX1 are:

Please keep the NFC area close to other devices or objects while using the NFC function.

Before setting up your HONOR X8b LLY-LX1, please note the following:

• Be careful not to scratch your device or hurt yourself when using the eject pin.

• Store the eject pin out of the reach of children to prevent accidental swallowing or injury.

• Do not use cut or modified SIM cards with your device as these may not be recognised and could damage the card tray (slot).

• If your SIM card does not match your device, please contact your carrier.

To set up your device, use the included eject pin. Ensure that the card is correctly aligned and that the card tray is level when you insert it into your device.

You can select the default mobile data card and calling card as needed on your HONOR X8b LLY-LX1. For details, check out the pre-installed Tips app.

Please note the following about 4G service:

• 4G service depends on the support of your network carrier and its deployment of relevant services. Please contact your carrier to activate 4G service.

• 4G service may be unavailable in certain areas due to network interference.

Please adhere to the following safety guidelines for your HONOR X8b LLY-LX1:

• To prevent possible hearing damage, do not listen at high volume levels for long periods.

• Using an unapproved or incompatible power adapter, charger or battery may damage your device, shorten its lifespan or cause a fire, explosion or other hazards.

• Ideal operating temperatures are 0 °C to 35 °C. Ideal storage temperatures are -20 °C to +45 °C.

• Pacemaker manufacturers recommend maintaining a minimum distance of 15 cm between a pacemaker and a wireless device to prevent potential interference with the pacemaker. If using a pacemaker, hold the device on the side opposite the pacemaker and do not carry the device in your front pocket.

• Keep the device and the battery away from fire, excessive heat and direct sunlight. Do not place them on or in heating devices, such as microwave ovens, water heaters, stoves or radiators.

• Adhere to local laws and regulations while using the device. To reduce the risk of accidents, do not use your wireless device while driving. If you must make or answer a call, stop your vehicle at a safe location first.

• While flying in an aircraft or immediately before boarding, ensure that you use your device according to the instructions provided. Using a wireless device in an aircraft may disrupt wireless networks, present a hazard to aircraft operations or be illegal under law.

• In order to avoid damaging the internal circuit of the device or charger, do not use the device in a dusty, damp, or dirty place, or near a magnetic field.

• When charging the device, make sure the power adapter is plugged into a socket near the devices and is easily accessible.

• Unplug the charger from the electric socket and from the device when not in use.

• Do not use, store or transport the device where flammables or explosives are stored (e.g. in a petrol station, oil depot or chemical plant). Using your device in these environments increases the risk of explosion or fire.

• Please consult your doctor and the device manufacturer to determine if operation of your device may interfere with the operation of your medical device.

• Adhere to any rules or regulations set forth by hospitals and health care facilities.

• Keep the battery away from fire, and do not disassemble, modify, throw, or squeeze it. Do not insert foreign objects into it, submerge it in water or other liquids, or expose it to external force or pressure, as this may cause the battery to leak, overheat, catch fire, or even explode.

• Improper battery use may lead to fire, explosion or other hazards.

• This device contains a built-in battery. Do not attempt to replace the battery by yourself. Otherwise, the device may not run properly or it may damage the battery. For your personal safety and to ensure that your device runs properly, you are strongly advised to contact an authorised service centre for a replacement.

Power off your HONOR X8b LLY-LX1 in any area with a potentially explosive atmosphere, and comply with all signs and instructions. Areas that may have potentially explosive atmospheres include areas where you would normally be advised to turn off your vehicle engine. Triggering of sparks in such areas could cause an explosion or a fire, resulting in bodily injuries or even deaths. Do not power on your device at refueling points such as service stations. Comply with restrictions on the use of radio equipment in fuel depots, storage, and distribution areas, and chemical plants. In addition, adhere to restrictions in areas where blasting operations are in progress. Before using the device, watch out for areas that have potentially explosive atmospheres that are often, but not always, clearly marked. Such locations include areas below the deck on boats, chemical transfer or storage facilities, and areas where the air contains chemicals or particles such as grain, dust, or metal powders. Ask the manufacturers of vehicles using liquefied petroleum gas (such as propane or butane) whether this device can be safely used in their vicinity.

Dispose of your HONOR X8b LLY-LX1, the battery, and accessories according to local regulations. They should not be disposed of in normal household waste. The symbol on the product, battery, literature, or packaging means that the products and batteries should be taken to separate waste collection points designated by local authorities at the end of the lifespan. This will ensure that EEE waste is recycled and treated in a manner that conserves valuable materials and protects human health and the environment.

The World Health Organisation has stated that exposure can be reduced by limiting your usage or simply using a hands-free kit to keep the device away from the head and body. Ensure that the device accessories, such as a device case and device holster, are not composed of metal components. Keep the device away from your body to meet the distance requirement.

For countries that adopted the SAR limit of 2.0 W/kg over 10 grams of tissue, the device complies with RF specifications when used near your ear or at a distance of 0.50 cm from your body. The highest reported SAR value for the HONOR X8b LLY-LX1 is:

• Head SAR: 0.79 W/kg

• Body SAR: 1.25 W/kg

The frequency bands and transmitting power (radiated and/or conducted) nominal limits applicable to this radio equipment are as follows: