HONOR JDY-LX3P (01) PDF Document

Before using the HONOR JDY-LX3P, familiarize yourself with its basic operations:

• To power on your device, press and hold the power button until the screen turns on.

• To power off your device, press and hold the power button, and then touch the power off icon.

• To restart your device, press and hold the power button, and then touch the restart icon.

• To force restart your device, press and hold the Power and Volume down buttons for more than 10 seconds.

The main components of the HONOR JDY-LX3P are as follows:

You can also check out the pre-installed Tips app to master all the great features on your device.

When getting started with your HONOR JDY-LX3P, please observe the following:

• Be careful not to scratch your device or hurt yourself when using the eject pin.

• Store the eject pin out of the reach of children to prevent accidental swallowing or injury.

• Do not use cut or modified SIM or microSD cards with your device as these may not be recognized and could damage the card tray (slot).

• If your SIM card does not match your device, please contact your carrier.

Follow the instructions in the figures to set up your device. Please use the eject pin included. Ensure that the card is correctly aligned and that the card tray is level when you insert it into your device.

On your HONOR JDY-LX3P, select the default mobile data card and calling card as needed. For details, check out the pre-installed Tips app.

Please note that 4G service depends on the support of your network carrier and its deployment of relevant services. Please contact your carrier to activate 4G service.

Please read all of the safety information carefully before using your HONOR JDY-LX3P to ensure its safe and proper operation.

• To prevent possible hearing damage, do not listen at high volume levels for long periods.

• Using an unapproved or incompatible power adapter, charger, or battery may damage your device, shorten its lifespan, or cause a fire, explosion, or other hazards.

• Ideal operating temperatures are 0 °C to 35 °C. Ideal storage temperatures are -20 °C to +45 °C.

• Pacemaker manufacturers recommend that a minimum distance of 15 cm be maintained between a device and a pacemaker to prevent potential interference with the pacemaker. If using a pacemaker, hold the device on the side opposite the pacemaker and do not carry the device in your front pocket.

• Keep the device and the battery away from excessive heat and direct sunlight. Do not place them on or in heating devices, such as microwave ovens, stoves, or radiators.

• Observe local laws and regulations while using the device. To reduce the risk of accidents, do not use your wireless device while driving.

• While flying in an aircraft or immediately before boarding, only use your device according to instructions provided. Use of a wireless device in an aircraft may disrupt wireless networks, present a hazard to aircraft operation, or be illegal.

• In order to avoid damaging the internal circuit of the device or charger, do not use the device in a dusty, damp, or dirty place, or near a magnetic field.

• When charging the device, make sure the power adapter is plugged into a socket near the devices and is easily accessible.

• Unplug the charger from electrical outlets and the device when not in use.

• Do not use, store or transport the device where flammables or explosives are stored (in a gas station, oil depot, or chemical plant, for example).

• Keep the battery away from fire, and do not disassemble, modify, throw, or squeeze it. Do not insert foreign objects into it, submerge it in water or other liquids, or expose it to external force or pressure, as this may cause the battery to leak, overheat, catch fire, or even explode.

• Dispose of this device, the battery, and accessories according to local regulations. They should not be disposed of in normal household waste.

• This device contains a built-in battery. Do not attempt to replace the battery by yourself. Otherwise, the device may not run properly or it may damage the battery. For your personal safety and to ensure that your device runs properly, you are strongly advised to contact an authorized service center for a replacement.

For countries that adopted the SAR limit of 1.6 W/kg over 1 gram of tissue, the HONOR JDY-LX3P complies with RF specifications when used near your ear or at a distance of 1.50 cm from your body. The highest SAR values are:

Body worn operation

The device complies with RF specifications when used near your ear or at a distance of 1.50 cm from your body. Ensure that the device accessories, such as a device case and device holster, are not composed of metal components. Keep the device away from your body to meet the distance requirement.

The device IMEI for your HONOR JDY-LX3P can be obtained by dialing *#06#.

To use the FM radio function on your HONOR JDY-LX3P, please connect wired earphones first.

The HONOR JDY-LX3P has the Cellular Broadcasting Service enabled and activated. You can configure the alert messages through the following menu: Settings > Sounds & vibration > More settings > Wireless Emergency Alerts.