Free English HONOR ROD2-W09 (01) PDF document. Download the PDF, use the online viewer, or browse the FAQs for easy troubleshooting.


CLICK HERE TO DOWNLOAD HONOR ROD2-W09 (01) PDF DOCUMENT

If this is not the document you want for this product, click here to see if we have any other documents for this product.

How do I perform basic power operations on my HONOR ROD2-W09?

You can perform the following basic operations on your HONOR ROD2-W09:

To power on: Press and hold the power button until the screen turns on.

To power off: Press and hold the power button, and then touch the power off icon.

To restart: Press and hold the power button, and then touch the restart icon.

To force restart: Press and hold the Power and Volume down buttons for more than 10 seconds.


What are the main buttons and ports on the HONOR ROD2-W09?

1 Power button 2 Volume button
3 USB Type-C port/Headset jack

What are the safety guidelines for using my HONOR ROD2-W09?

Please read all of the safety information carefully before using your HONOR ROD2-W09 to ensure its safe and proper operation.

• To prevent possible hearing damage, do not listen at high volume levels for long periods.

• Using an unapproved or incompatible power adapter, charger, or battery may damage your device, shorten its lifespan, or cause a fire, explosion, or other hazards.

• Ideal operating temperatures are 0 °C to 35 °C. Ideal storage temperatures are -20 °C to +45 °C.

• Pacemaker manufacturers recommend that a minimum distance of 15 cm be maintained between a device and a pacemaker to prevent potential interference with the pacemaker. If using a pacemaker, hold the device on the side opposite the pacemaker and do not carry the device in your front pocket.

• Keep the device and the battery away from excessive heat and direct sunlight. Do not place them on or in heating devices, such as microwave ovens, stoves, or radiators.

• Observe local laws and regulations while using the device. To reduce the risk of accidents, do not use your wireless device while driving.

• While flying in an aircraft or immediately before boarding, only use your device according to instructions provided. Use of a wireless device in an aircraft may disrupt wireless networks, present a hazard to aircraft operation, or be illegal.

• In order to avoid damaging the internal circuit of the device or charger, do not use the device in a dusty, damp, or dirty place, or near a magnetic field.

• Do not use, store or transport the device where flammables or explosives are stored (in a gas station, oil depot, or chemical plant, for example). Using your device in these environments increases the risk of explosion or fire.


What are the instructions for charging my HONOR ROD2-W09?

When charging the device, make sure the power adapter is plugged into a socket near the devices and is easily accessible. Unplug the charger from electrical outlets and the device when not in use.


What are the safety precautions for the battery in my HONOR ROD2-W09?

• Keep the battery away from fire, and do not disassemble, modify, throw, or squeeze it. Do not insert foreign objects into it, submerge it in water or other liquids, or expose it to external force or pressure, as this may cause the battery to leak, overheat, catch fire, or even explode.

• This device contains a built-in battery. Do not attempt to replace the battery by yourself. Otherwise, the device may not run properly or it may damage the battery. For your personal safety and to ensure that your device runs properly, you are strongly advised to contact an authorized service center for a replacement.


How should I dispose of my HONOR ROD2-W09, its battery, and accessories?

Dispose of this device, the battery, and accessories according to local regulations. They should not be disposed of in normal household waste. Improper battery use may lead to fire, explosion, or other hazards. The symbol on the product, battery, literature, or packaging means that the products and batteries should be taken to separate waste collection points designated by local authorities at the end of the lifespan. This will ensure that EEE waste is recycled and treated in a manner that conserves valuable materials and protects human health and the environment.


What is the RF Exposure and SAR information for the HONOR ROD2-W09?

The HONOR ROD2-W09 complies with the applicable national and international standards for exposure to radio waves. “SAR” stands for “Specific Absorption Rate”, which is a measure of the rate that quantifies the user’s exposure to radio waves from the radio equipment concerned.

Keep the device away from your body to meet the distance requirement. The World Health Organization has stated that exposure can be reduced by limiting your usage or simply using a hands-free kit. Ensure that the device accessories, such as a device case and device holster, are not composed of metal components.

The highest reported SAR value: body SAR: 1.05 W/kg, limit of 2.0 W/kg over 10 grams, at a distance of 0.50 cm.

How to use the PDF below:
* Touchscreen: Swipe up/down with-in the PDF to scroll and pinch or spread with two fingers to zoom.
* Mouse: While your mouse is hovering over the PDF, use the mouse wheel to scroll and click on the – / + buttons at the bottom of the PDF to zoom.

NO IMAGE CONTENT AT THIS TIME. PLEASE CHECK BACK LATER

CLICK HERE TO DOWNLOAD HONOR ROD2-W09 (01) PDF DOCUMENT


Leave comments, questions, reviews, tips, tricks, hacks or page errors below. Account not required.