FUJIFILM APEOS C6580 (03) PDF DOCUMENT

To make a copy, first configure the quantity and other setting items on the control panel. Once your settings are configured, tap on the [Start] button.

Deleting a job: Tap on the back arrow icon or [Pause], then tap on [Delete].

Resetting settings: Tap on [Reset] to return the settings to their default values.

1. In your application, click [Print].

2. Select the FUJIFILM APEOS C6580 printer from the list.

3. Click [Printer Properties] to open the settings window.

4. In the properties window, set the features you need (e.g., Paper Size, 2-Sided Print, Color) and the desired print quantity.

5. Click [OK] to send the print job to the printer.

1. From the Scan screen, select a recipient from the address book or choose a sending method, such as URL, SMB, FTP, SFTP, or Email. Then, set the required destination information.

2. Tap the settings icon on the upper side of the screen and set your desired scan features (e.g., File Format, Color Scanning, 2 Sided Scanning, Resolution).

3. Tap on [Start] to begin scanning.

This is a two-part process involving the printer and your PC.

On the FUJIFILM APEOS C6580 control panel:

1. Tap on [Scan to Folder].

2. Select a destination folder to save the scanned data.

3. Tap the settings icon to configure items such as Color Scanning, 2 Sided Scanning, Resolution, and Original Type.

4. Tap on [Start].

On your PC:

1. Click the [Start] button on your PC’s taskbar.

2. Open [Stored File Manager 3] from the [Network Scanner Utility 3] program group.

3. In the “Specify Scanner” window, select your scanner from the detected list or enter its IP address directly.

4. Click [Next].

5. Select your scanned document and click [Import] to save it to your computer.