DYSON AIRWRAP I.D. (01) PDF MANUAL

DYSON AIRWRAP I.D. (01) PDF SUMMARY:

What items are included in the box?

The box contains the Dyson Airwrap i.d.™ multi-styler and dryer main body, filter cleaning brush, fast dryer, 30mm Airwrap™ barrel, 20mm Airwrap™ barrel, 30mm Airwrap™ long barrel, 40mm Airwrap™ long barrel, conical Airwrap™ barrel, 40mm Airwrap™ barrel, firm smoothing brush, small soft smoothing brush, small firm smoothing brush, round volumising brush, small round volumising brush, soft smoothing brush, large volumising round brush, blade concentrator, Wave+Curl diffuser, diffuserWide-tooth comb, and Dryer+ Flyaway smoother.

---

Where can I buy additional attachments?

Additional attachments can be purchased at http://www.dyson.com.au/.co.nz.

---

How do I power the Dyson Airwrap i.d.™ multi-styler and dryer on and off?

Use the sliding switch to power the Dyson Airwrap i.d.™ multi-styler and dryer on and off.

---

What do the LED lights indicate?

• Flashing blue: Ready to connect.
• Constant blue: Connected.
• Red LED lights: If the red LED lights, and the filter has already been cleaned, contact the Dyson Helpline.

---

How do I clean the filter?

Refer to the ‘Regular filter maintenance’ section for details on how to clean the filter.

---

How do I remove the filter cage?

The filter cage is easy to remove for cleaning. See the ‘Regular filter maintenance’ section for details.

---

How can I unlock the i.d. curl™ personalised curling sequence?

Complete the tutorial in the MyDyson™ app to unlock this feature. Slide up and release to activate.

---

How do I control the airflow?

There are 3 airflow speeds.

---

How do I control the temperature?

There are three temperature settings including constant cold.

---

How do I unlock the i.d. curl™ personalised curling sequence?

• Step 1: Download the MyDyson™ app and create an account. If you already have an account, log in.
• Step 2: Power on your Dyson Airwrap i.d.™ multi-styler and dryer and add the machine to the app. Bluetooth® wireless technology must be enabled on your mobile device.
• Step 3: Follow the steps to pair your Airwrap i.d.™. Airflow will be active during this time.
• Step 4: Once paired, power off your Airwrap i.d.™. Continue set-up in the app to enable features such as the i.d. curl™ personalised curling sequence.

---

Where can I find the requirements for the MyDyson™ app?

Operating system and mobile device requirements for the MyDyson™ app can be found on the App Store or Google Play.

---

How do I connect an attachment?

Turn the attachment into the main body until it fits securely.

---

How do I change attachments?

To change the attachment, pull down on the switch to release it.

---

What should I do when handling hot attachments?

During use, the Dyson Airwrap™ barrels, round brushes and Dryer+Flyaway smoother will get hot. To change to another attachment, hold the tip. Hold the attachment only in the area indicated. Some attachments may need occasional cleaning.

---

Where can I find more information about the attachments?

For more information, go to http://www.dyson.com.au/.co.nz.

---

How do I use the barrels for pre-styling?

• Step 1: Take a section of hair and bring the barrel towards the tips. Hair will start to wrap around the barrel.
• Step 2: Move the styler towards the head, no need to twist. Your personalised i.d. curl™ sequence will run.
• Step 3: Cold shot will automatically activate to set the curl. Airflow will automatically reduce when the sequence is complete.
• Move the device downwards to release. To change the curl direction, rotate the barrel’s cool tip.

---

How do I use the i.d. curl™ sequence?

Slide up and release the power switch to activate i.d. curl™ sequence, following initial app set-up.

---

What dryer attachment should I use for straight and wavy hair?

For straight and wavy hair, use a dryer attachment – Fast dryer or Dryer+Flyaway smoother.

---

What are the modes on the Dryer+Flyaway smoother?

The Dryer+Flyaway smoother has two modes: drying and smoothing. Use the cool tip to switch between the modes.

---

What should my hair feel like before curling with barrels?

Hair should look dry but feel cold to the touch before curling with barrels.

---

What brush should I use for curly and coily hair?

For curly and coily hair, use the Firm smoothing brush. Brush hair downwards in small sections, starting from the ends and working towards the roots, until slightly damp to touch.

---

How do I use the Smoothing brush?

Use the Smoothing brush to brush from root to tip. For volume, face bristles outwards. Turn brush inwards at the ends to create shape.

---

How do I use the Round volumising brush?

The Round volumising brush has long fine bristles to direct air into the hair whilst giving body, creating tension to shape the hair as it dries. Lift sections upwards as you dry to add volume. Wrap hair around and under the brush to shape the ends.

---

How do I use the Blade concentrator?

Dry with a high-velocity blade of air for precision styling. Focused airflow to create bends and flicks with a brush. Once secured, the Blade concentrator can be rotated 360 degrees for ease when styling. Angle attachment down the hair tress to avoid disruption and to create a smooth, aligned finish.

---

How do I use the Dryer+Flyaway smoother in Smoothing mode?

Rotate the cool tip to select Smoothing mode. Press against hair to switch airflow direction. Position the contact bar against the head until you hear a click and hair attracts. Run from root to tip to hide flyaways. Use on dry hair to hide flyaways. Position against hair until it attracts then slowly run down to tips. For use on dry and straight hair.

---

How do I use the Wide-tooth comb?

Comb hair downwards in small sections, starting from the ends and working upwards towards the roots, until the desired result is achieved.

---

How do I use Diffuse mode?

Detachable prongs disperse airflow to the roots for textured, voluminous curls and coils.

---

How do I use Dome mode?

Airflow is drawn into the dome to help enhance and smooth natural waves or curls.

---

When is filter cleaning overdue?

Filter cleaning is overdue when the white LED starts flashing.

---

What should I do before cleaning the filter?

Ensure that you unplug your appliance from the mains electricity supply and allow it to cool down before cleaning your filter.

---

How do I clean the filter cage?

• Step 1: Slide the filter cleaning brush over the cable and onto the filter cage. Using a rotating action, clean the filter cage thoroughly. Remove the filter cleaning brush.
• Step 2: Hold the handle of your appliance and pull the filter cage downwards, onto the cable. Gently pull open the filter cage and slide it off the cable.
• Step 3: Wash the filter cage under a warm, running tap.
• Step 4: Shake the filter cage to remove the majority of the excess water, then leave to dry naturally.
• Step 5: Using a rotating and up and down action, clean the filter mesh with the filter cleaning brush until all the debris has been removed. Do not use water or chemicals to clean the filter mesh.
• Step 6: Gently pull the filter cage open and slide it onto the cable. Slide the filter cage towards the handle and twist until it snaps into place.