PETLIBRO SCOUT PLPC001 (01) PDF Document

The one-pack version of the PETLIBRO SCOUT PLPC001 includes the following items:

• 1 x Camera

• 1 x Power Adapter

• 2 x Screws and Screw Anchors

• 1 x L-Shaped Wall Mount

• 1 x Mounting Plate

• 1 x Power Cord

• 1 x Adhesive Mount

• 1 x Quick Start Guide and User Manual

Note: For multi-pack versions, the contents (excluding the Quick Start Guide and User Manual) will increase proportionally.

The PETLIBRO SCOUT PLPC001 camera has the following components:

Front View:

• Camera Lens

• Infrared Light (x2)

• Indicator Light

• Microphone

• Manual Privacy Cover

• Adjustable Tilt

• Rotating Base

Back View:

• Reset Button

• Speaker

• Power Cord Port

1. Power Connection:

Connect your camera to a power supply and it will automatically start. Your camera is ready for app connection when the white indicator light under the lens starts flashing.

2. Download the Petlibro App:

Search for “Petlibro” in your smartphone’s app store to download and install the app. Ensure the app is updated to the latest version. The app named “Petlibro Lite” is not the correct app for your camera.

3. Wi-Fi Connection:

You can connect your camera to Wi-Fi using one of two options:

• Option A: Turn on your phone’s Bluetooth to find the camera you want to add.

• Option B: Use your camera to scan the QR code displayed in the app. Hold your phone within 19.7 inches (0.5m) of the camera lens.

Please follow these tips for optimal performance:

• Set the camera up indoors.

• Position your camera with a strong Wi-Fi connection.

• Keep your camera at least 10in / 25cm away from metal objects (e.g., microwaves).

• Do not face the camera lens directly towards mirrors or bright lights.

The PETLIBRO SCOUT PLPC001 supports freestanding, wall-mounted, and tripod-mounted installations.

Freestanding:

Your camera can be flexibly placed on flat surfaces, such as cabinets, dining tables, or coffee tables. Position it wherever you like, as long as there’s an available power socket nearby. You can use the provided adhesive mount for added stability.

Wall Mount:

Step 1. Mark two holes on your chosen wall spot and drill holes using a 1/4 inch drill bit.

Step 2. Insert the provided screw anchors (6 x 25mm) into the holes. Position the L-shaped wall mount facing up and secure it with screws.

Step 3. Thread the power cord through the mount, connect it to the camera, then attach the camera to the mount until it clicks into place.

Tip: For wood or drywall, you can skip the drilling and screw anchors, and screw the wall mount directly into the wall. Use only the provided accessories.

Tripod Mount:

Step 1. Attach the mounting plate to the tripod using the 1/4″ tripod screw.

Step 2. Set your camera on the mounting plate and twist to lock.

If you want to connect your camera to a new smartphone, you must unbind it from your old smartphone first, then reset the camera. Follow these steps:

1. Close the privacy cover manually.

2. Press the reset button for 5 seconds using a pin (not included) until you hear the “Reset Successful” prompt tone.

3. Open the privacy cover.

4. Wait for 5 seconds; a white light flashing slowly indicates a successful reset.

5. Connect the camera to your new smartphone.

The indicator light on your camera shows its current status. Refer to the tables below for details.

During Network Configuration

During Operation

• The operating temperature range for your camera is between -4°F and 113°F (-20°C-45°C). Do not use your camera in environments with temperatures outside this specified range.

• Your camera is a precision electronic product. To ensure its normal operation, do not use your camera in environments with high humidity levels, and do not submerge in water or get the camera wet.

• Only use accessories recommended or sold by the manufacturer. Using accessories not approved by the manufacturer may result in unsafe conditions.

• The provided stickers are designed for freestanding placement on horizontal surfaces only. Do not use them on vertical surfaces as the camera may fall.

• When the camera is installed in a high place, please check that it is placed properly and not easily tipped over, so that it will not fall and cause equipment damage or accidents.

The PETLIBRO SCOUT PLPC001 complies with Part 15 of the FCC Rules and contains licence-exempt transmitters/receivers that comply with Innovation, Science and Economic Development Canada’s licence-exempt RSS(s). Operation is subject to the following two conditions:

1. This device may not cause harmful interference.

2. This device must accept any interference received, including interference that may cause undesired operation.

Changes or modifications not expressly approved by the party responsible for compliance could void the user’s authority to operate the equipment.

This equipment complies with FCC’s and IC’s RF radiation exposure limits. The antenna(s) must be installed and operated to provide a separation distance of at least 7.8in / 20cm from all persons and must not be co-located or operated with any other antenna or transmitter.

If the PETLIBRO SCOUT PLPC001 causes harmful interference to radio or television reception, which can be determined by turning the equipment off and on, you are encouraged to try to correct the interference by one or more of the following measures:

• Reorient or relocate the receiving antenna.

• Increase the separation between the equipment and receiver.

• Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.

• Consult the dealer or an experienced radio/TV technician for help.