PETLIBRO ONE PLAF301 (01) PDF Document

The following items are included in the box:

• Automatic Pet Feeder (x1)

• Stainless Steel Food Bowl with Holder (x1)

• Power Adapter (x1)

• Desiccant Bag (x1)

• Food Bowl Lid (x1)

• Food Bowl Shield (x2)

• User Manual (x1)

• Quick Start Guide (x1)

• Collar (x1)

• Tag (x1)

• RFID Reader (x1)

The main components are:

1. Food Tank Lid

2. Desiccant Bag Holder

3. Food Tank

4. Infrared Sensor A (Detects pet)

5. Control Panel

6. Infrared Sensor B (Detects food levels)

7. LED Display

8. Feeder Base

9. Food Bowl Lid Pivot Lock

10. Food Outlet

11. Infrared Sensor C (Detects food blockages)

12. Food Bowl Shields

13. Food Bowl Lid

14. Stainless Steel Food Bowl

15. Bowl Tray

16. RFID Reader

17. RFID Reader Prongs

18. Battery Compartment

19. Battery Compartment Cover

20. Speaker

21. Power Port

22. Food Tank Lock

LED Display Status:

Indicator Status:

1. Install the food bowl lid

1) Press the locks on both sides of the food tank lid, remove the lid, and take out the accessories from the food tank.

2) Install the food bowl lid in the direction shown in the manual’s figure.

3) After successfully installing the food bowl lid, move the food bowl lid pivot lock to the left to ensure that it’s in the locked state. Note: If the food bowl lid is unlocked, the product will not work properly.

2. Install the body

1) Place the RFID reader on a flat surface, keeping it close to the power port and away from metal objects.

2) Place the stainless steel food bowl and bowl tray in the designated groove of the reader.

3) Open the battery compartment at the bottom of the feeder. Install three alkaline D batteries (not included) in case of a power outage.

4) Plug the USB cable into the power port at the bottom of the feeder.

5) Place the body in the designated position on the reader. Note: When installing the body on the RFID reader, if you hear a ‘click’ sound, it indicates that the body is properly installed.

3. Install the food bowl shields

Insert both shields into the body.

4. Install the food tank

Press the food tank lock to lock it in place.

• Batteries are not included. The feeder requires three alkaline D batteries.

• To avoid sudden power outages and the feeding of your pet being affected, do not use the batteries as the only source to power the feeder; the batteries can only be used as an emergency plan.

• To avoid battery leakage, remove the batteries if the device won’t be in use for a period of time.

• When powered in battery mode, only the RFID recognition function, Wi-Fi function, and feeding function are enabled; all other functions are disabled.

5. Add dry pet food to the food tank

• To prevent uneven food dispensing, please add enough pet food to prevent low surplus food alarm triggered.

• Recommended kibble size: 2-18mm (0.07-0.7in) in diameter.

• Do not use canned, wet, or moist food.

6. Put the food tank lid on

Place the desiccant bag in the holder under the food tank lid.

• It is recommended to change the desiccant bag every 15 days to prevent mold growth.

• Remove the desiccant bag before cleaning the lid.

Press the locks on both sides of the food tank lid to install the lid in place.

7. Connect Power

1) Plug the 5V power adapter into a power outlet.

2) The indicators will light up automatically to indicate the feeder is on.

1. Download and install the PETLIBRO app from the App Store or Google Play. Note: There are two similar apps available, PETLIBRO and PETLIBRO LITE. Please make sure you download the correct one (PETLIBRO).

2. Follow the instructions in the app to configure the network and connect your feeder.

1. After successfully adding the device in the app, tap the “ADD COLLAR” button.

2. Place the collar tag in the RFID recognition area, as close to the RFID reader as possible.

Note: There are two methods to pair the collar tag: sensor-based pairing and QR code-based pairing. If one method fails, you can switch to the other.

3. After a successful addition, tap “CONFIRM” to pair the collar tag.

4. Follow the app instructions to add relevant pet information.

• Power off the device before cleaning.

• Clean the food bowl with tap water.

• Do not clean the feeder in a dishwasher. Only the stainless steel bowl is dishwasher safe.

• Use a soft damp cloth to clean the feeder base. Do not wash any part with electronic components.

• Replace the desiccant bag every half a month to keep food fresh.

Unplug the cable from the outlet and remove the batteries.

• Use the feeder in a dry place.

• Use the feeder on a level surface.

• Dispose of all packaging materials properly. Some items may be packed in plastic bags; these bags could cause suffocation. Keep them away from children and pets.

• Do not use the feeder with pets that are not able to reach the food bowl or with any physical disability.

• Do not immerse the base part in water at any time as it may damage electronic components.

• Do not use the feeder outdoors. Check its operation frequently to be sure it is operating properly.

• Do not disassemble the feeder other than as instructed in this user manual.

• Only use accessories recommended or sold by the manufacturer. The use of accessories not recommended or sold by the manufacturer may cause an unsafe condition.

• Do not modify the feeder.

• Examine the feeder after installation. Do not plug in if there is water on the power cable or plug.

• To avoid tripping, always position the power cable out of the way of foot traffic.

• Do not install or store the feeder where it will be exposed to weather or temperatures below 0°C (32°F).

• Do not use the feeder without adding pet food first.

• Power off the feeder when it’s not in use.