Free English MOXA NPORT 5650-8-HV-T (02) PDF document. Download the PDF, use the online viewer, or browse the FAQs for easy troubleshooting.
CLICK HERE TO DOWNLOAD MOXA NPORT 5650-8-HV-T (02) PDF DOCUMENT
If this is not the document you want for this product, click here to see if we have any other documents for this product.
What items should be included in the package for my MOXA NPORT 5650-8-HV-T?
The MOXA NPORT 5650-8-HV-T package should contain the following items:
• 1 NPort 5600 Series serial device server
• Power cord (AC models only)
• 1 DIN-rail/wall-mounting kit: WK-45-01
• NPort 5600 Quick Installation Guide
Please notify your sales representative if any of the above items are missing or damaged.
Are there any special considerations for the wide temperature model of the MOXA NPORT 5650-8-HV-T?
Yes. The wide temperature model, such as the MOXA NPORT 5650-8-HV-T, does not come with LCM display panels or push buttons. All descriptions of LCM functionality apply only to standard temperature models.
How do I reset my MOXA NPORT 5650-8-HV-T to its factory default settings?
To load the factory defaults, use a pointed object to press the Reset button continuously for 5 seconds. You can release the button after the Ready LED stops blinking.
What do the front panel LED indicators on my MOXA NPORT 5650-8-HV-T signify?
| Name | Color | Function |
|---|---|---|
| Ready | Off | Power is off, or power error condition exists. |
| Red | Steady on: Power is on and the NPort is booting up. Blinking: Indicates an IP conflict, or DHCP or BOOTP server did not respond properly. |
|
| Green | Steady on: Power is on and the NPort is functioning normally. | |
| Blinking: The NPort has been located by NPort Administrator’s Location function. | ||
| 1 to 16 | Orange | Serial port is receiving data. |
| Green | Serial port is transmitting data. | |
| Off | No data is being transmitted or received through the serial port. |
How do I operate the LCM panel on my MOXA NPORT 5650-8-HV-T?
Note: The wide temperature MOXA NPORT 5650-8-HV-T does not include an LCM panel. The following instructions apply to standard temperature models only.
There are four buttons on the front panel used to operate the LCM panel. Going from left to right, the buttons and their functions are:
| Button | Action |
|---|---|
| MENU | Activates the main menu, or returns to a lower level. |
| ^ (Up Arrow) | Scrolls up through a list of items shown on the LCM panel’s second line. |
| v (Down Arrow) | Scrolls down through a list of items shown on the LCM panel’s second line. |
| SEL | Selects the option listed on the LCM panel’s second line. |
What do the rear panel link indicators mean on the fiber model of the MOXA NPORT 5650-8-HV-T?
| LED Name | LED Color | LED Function |
|---|---|---|
| Link | Off | Fiber disconnected. |
| Green | Fiber connected, data not transmitting. | |
| Blinking | Fiber connected, data is transmitting. |
What are the steps for the hardware installation of my MOXA NPORT 5650-8-HV-T?
STEP 1: Attach Power Adapter
After removing the MOXA NPORT 5650-8-HV-T from the box, the first step is to attach the power adapter.
STEP 2: Connect the Power
AC Power: Connect the 100-240 VAC power cord to the AC connector. The “Ready” LED will show a solid red color until the system is ready, at which time it will change to a green color.
DC Power: Connect the power cord to the DC connector. For a model like the NPort 5610-8-48V, loosen the screws on the V+ and V- terminals of the terminal block. Connect the power cord’s 48 VDC or -48 VDC wire to the V+ terminal, and the DC Power Ground wire to the V- terminal, then tighten the screws. The “Ready” LED will turn solid red, then green when the system is ready.
STEP 3: Grounding the NPort (VDC models)
Grounding and wire routing help limit the effects of noise from electromagnetic interference (EMI). Run the ground connection from the ground screw to the grounding surface before connecting devices. For models like the NPort 5610-8-48V, the Shielded Ground (SG) contact is the second from the right of the 5-pin terminal block. Connect the SG wire to the Earth ground.
STEP 4: Connect to a Network
Use a standard straight-through Ethernet cable to connect the MOXA NPORT 5650-8-HV-T to a hub or switch. If connecting directly to a computer for setup or testing, use a cross-over Ethernet cable.
STEP 5: Connect a Serial Device
Connect the serial port of your MOXA NPORT 5650-8-HV-T to your serial device.
Placement Options
You can place the MOXA NPORT 5650-8-HV-T on a desktop or another horizontal surface.
What are the default network settings for the MOXA NPORT 5650-8-HV-T?
The default IP address configuration for the MOXA NPORT 5650-8-HV-T is:
• LAN: Static
• IP Address: 192.168.127.254
• Netmask: 255.255.255.0
You may log in with the password moxa to change these settings.
How can I find the IP address of my MOXA NPORT 5650-8-HV-T if I have forgotten it?
If you have forgotten the IP address of your MOXA NPORT 5650-8-HV-T, use the Device Search Utility (DSU) from your PC to locate the device. After searching the LAN for NPort units, the DSU will display the IP address of each unit it finds.
How do I perform a software installation for my MOXA NPORT 5650-8-HV-T?
1. Download the NPort Windows Driver Manager and install it as the driver to run with Real COM mode of the NPort Series.
2. Execute NPort Windows Driver Manager; then map the virtual COM ports on your Windows platform.
3. You may refer to the pin assignment section to loop back pin 4 and pin 5 for the RS-232 interface to carry out a self-test on the device.
4. Use HyperTerminal or a similar program (such as Moxa’s PComm Lite) to test whether the device is working correctly.
What are the serial port pinouts for the MOXA NPORT 5650-8-HV-T?
The MOXA NPORT 5650-8-HV-T uses an RJ45 connector for its serial ports with the following pin assignments:
| Pin | RS-232 | RS-422/RS-485-4W | RS-485-2W |
|---|---|---|---|
| 1 | DSR | – | – |
| 2 | RTS | TxD+ | – |
| 3 | GND | GND | GND |
| 4 | TxD | TxD- | – |
| 5 | RxD | RxD+ | Data+ |
| 6 | DCD | RxD- | Data- |
| 7 | CTS | – | – |
| 8 | DTR | – | – |
How should I wire an RS-232 serial cable for my MOXA NPORT 5650-8-HV-T?
The following table shows the connections from the NPort’s RJ45 port to various RS-232 connectors for communication with a serial device.
| NPort 5650 RJ45 Pin | Signal | DB9-M Pin | DB9-F Pin | DB-25-M Pin | DB-25-F Pin | Serial Device Signal |
|---|---|---|---|---|---|---|
| 1 | DSR | 6 | 4 | 6 | 20 | DTR |
| 2 | RTS | 7 | 8 | 4 | 5 | CTS |
| 3 | GND | 5 | 5 | 7 | 7 | GND |
| 4 | TxD | 3 | 2 | 2 | 3 | RxD |
| 5 | RxD | 2 | 3 | 3 | 2 | TxD |
| 6 | DCD | 1 | 1 | 8 | 8 | DCD |
| 7 | CTS | 8 | 7 | 5 | 4 | RTS |
| 8 | DTR | 4 | 6 | 20 | 6 | DSR |
How should I wire a 2-wire RS-485 serial cable for my MOXA NPORT 5650-8-HV-T?
The following table shows the connections from the NPort’s RJ45 port to various connectors for 2-wire RS-485 communication with a serial device.
| NPort 5650 RJ45 Pin | Signal | DB9-M Pin | DB9-F Pin | DB-25-M Pin | DB-25-F Pin | Serial Device Signal |
|---|---|---|---|---|---|---|
| 3 | GND | 5 | 5 | 7 | 7 | GND |
| 5 | Data+ | 2 | 3 | 3 | 2 | Data+ |
| 6 | Data- | 1 | 1 | 8 | 8 | Data- |
How should I wire a 4-wire RS-485/RS-422 serial cable for my MOXA NPORT 5650-8-HV-T?
The following table shows the connections from the NPort’s RJ45 port to various connectors for 4-wire RS-485/RS-422 communication with a serial device.
| NPort 5650 RJ45 Pin | Signal | DB9-M Pin | DB9-F Pin | DB-25-M Pin | DB-25-F Pin | Serial Device Signal |
|---|---|---|---|---|---|---|
| 2 | TxD+ | 7 | 8 | 4 | 5 | RxD+ |
| 3 | GND | 5 | 5 | 7 | 7 | GND |
| 4 | TxD- | 3 | 2 | 2 | 3 | RxD- |
| 5 | RxD+ | 2 | 3 | 3 | 2 | TxD+ |
| 6 | RxD- | 1 | 1 | 8 | 8 | TxD- |
How to use the PDF below:
* Touchscreen: Swipe up/down with-in the PDF to scroll and pinch or spread with two fingers to zoom.
* Mouse: While your mouse is hovering over the PDF, use the mouse wheel to scroll and click on the – / + buttons at the bottom of the PDF to zoom.
CLICK HERE TO DOWNLOAD MOXA NPORT 5650-8-HV-T (02) PDF DOCUMENT