Free English MOXA NPORT 5650-16-S-SC (02) PDF document. Download the PDF, use the online viewer, or browse the FAQs for easy troubleshooting.
CLICK HERE TO DOWNLOAD MOXA NPORT 5650-16-S-SC (02) PDF DOCUMENT
If this is not the document you want for this product, click here to see if we have any other documents for this product.
What is included in the package checklist for the MOXA NPORT 5650-16-S-SC?
The MOXA NPORT 5650-16-S-SC package should contain the following items:
• 1 NPort 5600 Series serial device server
• Power cord (AC models only)
• 1 DIN-rail/wall-mounting kit: WK-45-01
• NPort 5600 Quick Installation Guide
Note: Please notify your sales representative if any of the above items is missing or damaged.
What optional accessories are available for the MOXA NPORT 5650-16-S-SC?
The following optional accessories are available:
• CBL-RJ45M9-150: 8-pin RJ45 to DB9 male cable, 150 cm
• CBL-RJ45F9-150: 8-pin RJ45 to DB9 female cable, 150 cm
• CBL-RJ45M25-150: 8-pin RJ45 to DB25 male cable, 150 cm
• CBL-RJ45F25-150: 8-pin RJ45 to DB25 female cable, 150 cm
How do I perform the hardware installation for the MOXA NPORT 5650-16-S-SC?
Follow these steps for hardware installation:
STEP 1: After removing the MOXA NPORT 5650-16-S-SC from the box, attach the power adapter.
STEP 2: Connect the power.
AC Power: Connect the NPort’s 100-240 VAC power cord to the AC connector. The “Ready” LED will show a solid red color until the system is ready, at which time it will change to a green color.
DC Power: Connect the NPort’s VDC power cord to the DC connector. For a model like the NPort 5610-8-48V, loosen the screws on the V+ and V- terminals of the terminal block. Connect the power cord’s 48 VDC or -48 VDC wire to the V+ terminal, and the power cord’s DC Power Ground wire to the V- terminal, then tighten the screws. The “Ready” LED will show a solid red color until the system is ready, at which time it will change to a green color.
Grounding the DC model: Grounding and wire routing help limit the effects of noise due to electromagnetic interference (EMI). Run the ground connection from the ground screw to the grounding surface prior to connecting devices. The Shielded Ground (SG) contact is the second contact from the right of the 5-pin power terminal block connector. Connect the SG wire to the Earth ground.
STEP 3: Connect the MOXA NPORT 5650-16-S-SC to a network. Use a standard straight-through Ethernet cable to connect to a hub or switch. For setting up or testing, you can connect directly to a computer’s Ethernet port using a cross-over Ethernet cable.
STEP 4: Connect the MOXA NPORT 5650-16-S-SC’s serial port to a serial device.
Placement Options: You can place the MOXA NPORT 5650-16-S-SC on a desktop or other horizontal surface.
How do I reset the MOXA NPORT 5650-16-S-SC to its factory default settings?
To load factory defaults, press the Reset button continuously for 5 seconds. Use a pointed object to press the reset button. Release the button after the Ready LED stops blinking.
What do the front panel LED indicators on the MOXA NPORT 5650-16-S-SC signify?
The front panel of the MOXA NPORT 5650-16-S-SC has several LED indicators with the following functions:
| Name | Color | Function |
|---|---|---|
| Ready | Off | Power is off, or power error condition exists. |
| Red | Steady on: Power is on and the NPort is booting up. Blinking: Indicates an IP conflict, or DHCP or BOOTP server did not respond properly. |
|
| Green | Steady on: Power is on and the NPort is functioning normally. Blinking: The NPort has been located by NPort Administrator’s Location function. |
|
| 1 to 16 | Orange | Serial port is receiving data. |
| Green | Serial port is transmitting data. | |
| Off | No data is being transmitted or received through the serial port. |
What do the link indicator LEDs on the rear panel of the MOXA NPORT 5650-16-S-SC fiber model mean?
The rear panel of the MOXA NPORT 5650-16-S-SC fiber model has a link indicator with the following states:
| LED Name | LED Color | LED Function |
|---|---|---|
| Link | Off | Fiber disconnected. |
| Green | Fiber connected, data not transmitting. | |
| Blinking | Fiber connected, data is transmitting. |
How do I use the LCM Display Panel on the MOXA NPORT 5650-16-S-SC?
NOTE: The wide temperature model does not come with LCM display panels or push buttons. The following descriptions apply only to standard temperature models.
When the MOXA NPORT 5650-16-S-SC is working properly, the LCM panel will display a green color. It shows information such as:
• The NPort’s name (e.g., NP5610-16)
• The NPort’s local sequence number
• The NPort’s IP address
There are four buttons on the front panel to operate the LCM panel. From left to right, their functions are:
| Button | Action |
|---|---|
| MENU | Activates the main menu, or returns to a lower level. |
| ^ (Up Arrow) | Scrolls up through a list of items shown on the LCM panel’s second line. |
| v (Down Arrow) | Scrolls down through a list of items shown on the LCM panel’s second line. |
| SEL | Selects the option listed on the LCM panel’s second line. |
What are the default network settings for the MOXA NPORT 5650-16-S-SC, and how can I find a forgotten IP address?
The default network configuration for the MOXA NPORT 5650-16-S-SC is:
• LAN: Static
• IP Address: 192.168.127.254
• Netmask: 255.255.255.0
If you have forgotten the NPort’s IP address, use the Device Search Utility (DSU) from your PC to locate the device on the network. After searching the LAN for NPort units, the DSU will display the IP address of each unit it finds.
What are the general steps for software installation and configuration of the MOXA NPORT 5650-16-S-SC?
You can log in with the password moxa to change settings. For first-time use, the Wizard can guide you through configuring the IP address, SSID, and security mode.
For software installation, follow these steps:
• Download the NPort Windows Driver Manager and install it as the driver to run with Real COM mode of the NPort Series.
• Execute NPort Windows Driver Manager, then map the virtual COM ports on your Windows platform.
• To perform a self-test on the device for the RS-232 interface, you may loop back pin 4 and pin 5.
• Use HyperTerminal or a similar program (such as Moxa’s PComm Lite) to test whether the device is functioning correctly.
What are the serial port pin assignments for the MOXA NPORT 5650-16-S-SC?
The pinouts for the RJ45 serial ports on the MOXA NPORT 5650-16-S-SC are as follows:
| Pin | RS-232 | RS-422/RS-485-4W | RS-485-2W |
|---|---|---|---|
| 1 | DSR | – | – |
| 2 | RTS | TxD+ | – |
| 3 | GND | GND | GND |
| 4 | TxD | TxD- | – |
| 5 | RxD | RxD+ | Data+ |
| 6 | DCD | RxD- | Data- |
| 7 | CTS | – | – |
| 8 | DTR | – | – |
How do I wire a serial cable for an RS-232 connection with the MOXA NPORT 5650-16-S-SC?
The following table shows the cable wiring between the MOXA NPORT 5650-16-S-SC’s RJ45 port and various D-Sub connectors for an RS-232 serial device.
| NPort 5650 (RJ45 Pin) | Signal | DB9-M | DB9-F | DB-25-M | DB-25-F | Serial Device Signal |
|---|---|---|---|---|---|---|
| 1 | DSR | 6 | 4 | 6 | 20 | DTR |
| 2 | RTS | 7 | 8 | 4 | 5 | CTS |
| 3 | GND | 5 | 5 | 7 | 7 | GND |
| 4 | TxD | 3 | 2 | 2 | 3 | RxD |
| 5 | RxD | 2 | 3 | 3 | 2 | TxD |
| 6 | DCD | 1 | 1 | 8 | 8 | DCD |
| 7 | CTS | 8 | 7 | 5 | 4 | RTS |
| 8 | DTR | 4 | 6 | 20 | 6 | DSR |
What is the correct cable wiring for a 4-wire RS-485 / RS-422 connection to the MOXA NPORT 5650-16-S-SC?
The following table shows the cable wiring between the MOXA NPORT 5650-16-S-SC’s RJ45 port and various D-Sub connectors for a 4-wire RS-485 or RS-422 serial device.
| NPort 5650 (RJ45 Pin) | Signal | DB9-M | DB9-F | DB-25-M | DB-25-F | Serial Device Signal |
|---|---|---|---|---|---|---|
| 2 | TxD+ | 7 | 8 | 4 | 5 | RxD+ |
| 3 | GND | 5 | 5 | 7 | 7 | GND |
| 4 | TxD- | 3 | 2 | 2 | 3 | RxD- |
| 5 | RxD+ | 2 | 3 | 3 | 2 | TxD+ |
| 6 | RxD- | 1 | 1 | 8 | 8 | TxD- |
How should I wire a serial cable for a 2-wire RS-485 connection to the MOXA NPORT 5650-16-S-SC?
The following table shows the cable wiring between the MOXA NPORT 5650-16-S-SC’s RJ45 port and various D-Sub connectors for a 2-wire RS-485 serial device.
| NPort 5650 (RJ45 Pin) | Signal | DB9-M | DB9-F | DB-25-M | DB-25-F | Serial Device Signal |
|---|---|---|---|---|---|---|
| 3 | GND | 5 | 5 | 7 | 7 | GND |
| 5 | Data+ | 2 | 3 | 3 | 2 | Data+ |
| 6 | Data- | 1 | 1 | 8 | 8 | Data- |
How to use the PDF below:
* Touchscreen: Swipe up/down with-in the PDF to scroll and pinch or spread with two fingers to zoom.
* Mouse: While your mouse is hovering over the PDF, use the mouse wheel to scroll and click on the – / + buttons at the bottom of the PDF to zoom.
CLICK HERE TO DOWNLOAD MOXA NPORT 5650-16-S-SC (02) PDF DOCUMENT