Free English LELO TOR 3 (01) PDF document. Download the PDF, use the online viewer, or browse the FAQs for easy troubleshooting.
CLICK HERE TO DOWNLOAD LELO TOR 3 (01) PDF DOCUMENT
If this is not the document you want for this product, click here to see if we have any other documents for this product.
How to use the PDF below:
* Touchscreen: Swipe up/down with-in the PDF to scroll and pinch or spread with two fingers to zoom.
* Mouse: While your mouse is hovering over the PDF, use the mouse wheel to scroll and click on the – / + buttons at the bottom of the PDF to zoom.
How do you get started with the LELO TOR 3?
First, unlock your LELO TOR 3 by pressing and holding the ( + ) and ( – ) buttons simultaneously for 3 seconds until the light turns on. Then, press the ( + ) button to turn on your LELO TOR 3. Pressing the ( + ) button again increases vibration strength. Press the ( – ) button to decrease vibration strength. Press the ( ) button to cycle through the 8 vibration patterns. To turn off your LELO TOR 3, press and hold the ( – ) button until the light turns off.
How do you clean your LELO TOR 3?
Wash the LELO TOR 3 before and after each use with LELO Toy Cleaner or soap and water, and then rinse with warm water. Pat dry with a lint-free cloth or towel.
What should you avoid using to clean your LELO TOR 3?
What are the specifications of the LELO TOR 3?
| Materials: | Body-safe silicone, ABS plastic |
| Finish: | Smooth |
| Size: | 60 x 44 x 29 mm / 2.3 x 1.7 x 1.1 in |
| Weight: | 19g / 0.6oz |
| Battery: | Li-Ion 70mAh 3.7V |
| Charging: | 1.5h at 5.0V 70mA |
| User Time: | 1.5 hours |
| Standby: | 90 days |
| Frequency: | 120Hz |
| Max. Noise Level: | 50dB |
| Interface: | 3-button interface |
How do you charge the LELO TOR 3?
Insert the DC connector of the USB Charging Cable into the charging port on the LELO TOR 3. Insert the USB plug into a USB port on your computer or a USB charger. The LED on your LELO TOR 3 will pulse to indicate it is charging. When fully charged, the LED will emit a steady glow. When the battery is low, the LED on your LELO TOR 3 will emit a pulsing light.
What should you do if the LELO TOR 3 does not turn on?
Charge your LELO TOR 3 for 1.5 hours. The indicator light on the LELO TOR 3 will pulse to indicate it is charging. When fully charged, the indicator light will emit a steady glow.
What should you do if the LELO TOR 3 cannot be switched off and/or the interface buttons are not responding?
Lock your LELO TOR 3 by pressing and holding the ( + ) and ( – ) buttons simultaneously for 3 seconds. This will reset the LELO TOR 3.
What should you do if the LELO TOR 3 is not synchronizing with the LELO app?
Make sure your LELO TOR 3 is unlocked and Bluetooth is activated on your smartphone.
CLICK HERE TO DOWNLOAD LELO TOR 3 (01) PDF DOCUMENT