Free English LELO TOR 2 (01) PDF document. Download the PDF, use the online viewer, or browse the FAQs for easy troubleshooting.
CLICK HERE TO DOWNLOAD LELO TOR 2 (01) PDF DOCUMENT
If this is not the document you want for this product, click here to see if we have any other documents for this product.
How to use the PDF below:
* Touchscreen: Swipe up/down with-in the PDF to scroll and pinch or spread with two fingers to zoom.
* Mouse: While your mouse is hovering over the PDF, use the mouse wheel to scroll and click on the – / + buttons at the bottom of the PDF to zoom.
How do I unlock the LELO TOR 2?
The LELO TOR 2 is locked for transportation. To unlock it, you can simply connect the charger. Alternatively, you can unlock the device by pressing and holding the + and – buttons simultaneously for 3 seconds until the light turns on.
How do I charge the LELO TOR 2?
Insert the DC plug into the DC port at the base of your LELO TOR 2. Insert the main plug into a USB port. Always use original chargers provided by LELO with your device. Before first use, charge your LELO TOR 2 for 2 hours.
What do the LED light patterns indicate on the LELO TOR 2?
The LED lights on the interface indicate the battery status:
Pulsing light: The device is charging.
Steady glow: The device is fully charged.
Blinking white light: The battery is running low.
How do I turn the LELO TOR 2 on and off and change modes?
To turn the device on, press the + button. Once on, press the + button again to move up through the 6 stimulation modes. Press the – button to move down through the modes. To turn the device off, press and hold the – button.
What type of lubricant should I use with the LELO TOR 2?
You should apply LELO Personal Moisturizer to the product and your body for enhanced pleasure. For an even more pleasurable sensation, apply a liberal amount before and during use. Do not use the LELO TOR 2 with hand creams or silicone-based lubricants, as these may make the silicone permanently tacky.
How do I clean the LELO TOR 2?
The LELO TOR 2 is fully waterproof, making cleaning simple. Always clean the device thoroughly before and after each use.
Method 1: Rinse and spray with LELO Toy Cleaner, then rinse again and allow it to dry.
Method 2: Wash the silicone with warm water and antibacterial soap, rinse with clean hot water, and pat dry with a lint-free cloth or towel.
Never use cleansers containing alcohol, petrol, or acetone.
How should I store the LELO TOR 2?
Avoid leaving your LELO TOR 2 in direct sunlight and NEVER expose it to extreme heat. Store the device in a dust-free place and keep it away from products made of other materials.
Why does the LED on my LELO TOR 2 not pulse when the charger is connected?
If the LED does not pulse upon connection, it may be due to one of the following reasons:
The battery is drained and will require several minutes to acknowledge that it is being charged.
The charger is not properly connected. Check the wall and DC sockets.
Why does the LELO TOR 2 not activate when the + button is pressed?
If the device does not activate, check the following:
The battery is empty. Recharge your LELO TOR 2.
The interface of your LELO TOR 2 is locked. Hold down the + and – buttons for 3 seconds to unlock it.
What are the specifications of the LELO TOR 2?
| Materials | Body-safe silicone, ABS plastic |
| Finish | Matte |
| Size | 47 mm x 23 mm x 60 mm / 1.8 x 0.9 x 2.3 in |
| Diameter | 29 mm / 1.1 in |
| Battery | Li-Ion 70 mAh 3.7 V |
| Charging | Up to 2 h at 5.0 V 70 mA |
| User time | Up to 2 h |
| Standby | Up to 90 days |
| Frequency | 125 Hz |
| Max. noise level | 60 dB |
| Interface | 2 buttons |
CLICK HERE TO DOWNLOAD LELO TOR 2 (01) PDF DOCUMENT