LELO MIA 3 (01) PDF Document

Please consult your healthcare provider with any questions or concerns you may have regarding your condition.

This product can be used by adults only. Keep out of reach of children.

People with reduced physical, sensory or mental capabilities or lack of experience and knowledge should use the device only if they have been given supervision or instruction concerning the use of the device in a safe way and understand the hazards involved.

Only use the product for the intended purpose. Sharing sex toys with other people may transmit sexual diseases. Do not share your sex toys with people other than your partner.

Use protective measures with your partner if necessary.

Do not use the product if you detect any cracks or signs of degradation on the covering material.

To prevent stains, do not keep your product on absorbent surfaces. If your product operates abnormally, turn it off and consult support.

Do not use the product if one or more components are damaged.

The LELO MIA 3 is locked for transportation. To unlock it, simply connect the charger or hold down the + and – buttons simultaneously for 3 seconds.

Before the first use, charge your LELO MIA 3 for 2 hours.

To switch on: Give a semi-short press to the + button.

To switch between 8 modes: Double-click either the + or – button.

To switch off: If on level 1, give a semi-short press to the – button. If on any other level, give a semi-long press to the – button.

Step 1. Gently remove the protective lipstick cap on your LELO MIA 3.

Step 2. Before charging, ensure the USB plug is free from water or lubricant residue.

Step 3. Gently insert the USB plug into the matching socket on a USB extension cord or directly into a USB socket on a computer.

The appliances must only be supplied at SELV (Safety Extra Low Voltage).

Pulse: The LED will pulse to indicate the LELO MIA 3 is currently charging.

Steady glow: The LED will emit a steady glow when the device is fully charged.

Blinking white light: The LED will emit a blinking white light when the battery is running low.

The LELO MIA 3 is fully waterproof, making cleaning simple. Always clean the device thoroughly before and after each use.

Option 1: Rinse and spray with LELO Toy Cleaner, then rinse again and allow it to dry.

Option 2: Wash the silicone with warm water and antibacterial soap, rinse with clean hot water, and pat dry with a lint-free cloth or towel.

Tip: For an even more pleasurable sensation, you can apply a liberal amount of LELO Personal Moisturizer to your body and to the LELO MIA 3 before and during use.

Do not use hand creams or silicone-based lubricants with the LELO MIA 3, as they may make the silicone permanently tacky.

Never use cleansers containing alcohol, petrol, or acetone for cleaning.

Avoid leaving the device in direct sunlight and never expose it to extreme heat.

Store your LELO MIA 3 in a dust-free place and keep it away from products made of other materials.

If the LED does not pulse when connected, the battery may be completely drained and will require several minutes to acknowledge that it is being charged.

Alternatively, the charger may not be properly connected. Check the wall and USB socket connections.

The battery may be empty. Recharge your LELO MIA 3.

The interface may be locked. Hold down the + and – buttons for 3 seconds to unlock the device.