Free English ASPIRE NAUTILUS 2 (01) PDF document. Download the PDF, use the online viewer, or browse the FAQs for easy troubleshooting.
CLICK HERE TO DOWNLOAD ASPIRE NAUTILUS 2 (01) PDF DOCUMENT
If this is not the document you want for this product, click here to see if we have any other documents for this product.
How to use the PDF below:
* Touchscreen: Swipe up/down with-in the PDF to scroll and pinch or spread with two fingers to zoom.
* Mouse: While your mouse is hovering over the PDF, use the mouse wheel to scroll and click on the – / + buttons at the bottom of the PDF to zoom.
How do I fill the ASPIRE NAUTILUS 2?
1. Unscrew the top cap in a counterclockwise direction.
2. Add your favorite E-liquid into the tank. Do not overfill. Ensure the E-liquid level is no higher than the top of the glass as shown in the diagram.
3. Screw the top cap back on in a clockwise direction. Let the ASPIRE NAUTILUS 2 stand for 5 minutes after filling to allow the cotton to be fully saturated with E-liquid.
How do I replace the coil in the ASPIRE NAUTILUS 2?
1. Unscrew and remove the ASPIRE NAUTILUS 2 top hardware.
2. Unscrew the BVC coil from the bottom hardware.
3. Screw in a new BVC coil.
4. Replace the top hardware.
What are the specifications of the ASPIRE NAUTILUS 2?
The specifications of the ASPIRE NAUTILUS 2 are:
Capacity: 2ml
Height: 53mm
Diameter: 22mm
Coils: 0.7ohm (18-23W) / 1.8ohm (10-14W)
What materials are used in the construction of the ASPIRE NAUTILUS 2?
The ASPIRE NAUTILUS 2 is constructed from stainless steel and Pyrex glass.
CLICK HERE TO DOWNLOAD ASPIRE NAUTILUS 2 (01) PDF DOCUMENT