Free English LELO SONA (01) PDF document. Download the PDF, use the online viewer, or browse the FAQs for easy troubleshooting.
CLICK HERE TO DOWNLOAD LELO SONA (01) PDF DOCUMENT
If this is not the document you want for this product, click here to see if we have any other documents for this product.
How to use the PDF below:
* Touchscreen: Swipe up/down with-in the PDF to scroll and pinch or spread with two fingers to zoom.
* Mouse: While your mouse is hovering over the PDF, use the mouse wheel to scroll and click on the – / + buttons at the bottom of the PDF to zoom.
How do I get started with my LELO SONA?
Before enjoying your LELO SONA for the first time, charge it for 2 hours.
How do I charge my LELO SONA?
The LELO SONA is rechargeable, and its LELO USB Charging Cable is magnetic for your convenience. Plug the USB cable into a computer USB port or a USB wall charger. Make sure that the 2 raised lines on the end of the cable are lined up with the 2 lines on the LELO SONA, so that they make good contact. The LED on your LELO SONA will pulse to indicate that it is charging. When it is fully charged, the LED will emit a steady glow. Disconnect the cable and enjoy.
How do I use my LELO SONA?
1. Ensure your LELO SONA is charged.
2. Press the + button to turn on. The controls will light up and the LELO SONA will start on its lowest setting.
3. Press the + button again to increase the intensity of the vibration. Press the – button to decrease the intensity.
4. Press the () button to cycle through the LELO SONA’s 8 vibration patterns.
5. Press and hold the – button to turn off.
What are the settings for the LELO SONA?
The LELO SONA has 8 vibration patterns and varying intensities.
How do I clean my LELO SONA?
Clean your LELO SONA thoroughly after each use. Wash the silicone with warm water and an antibacterial soap, rinse with clean hot water and pat dry with a lint-free cloth or towel. Never use cleansers containing alcohol, petrol, or acetone, as these may harm the silicone and invalidate your warranty.
What do I do if my LELO SONA is not turning on?
Charge your LELO SONA for 2 hours until the light glows steady.
What do I do if my LELO SONA will not switch off?
Press and hold the – button.
What do I do if my LELO SONA is not charging?
Check that the LELO USB Charging Cable is correctly connected. Refer to the information under CHARGING YOUR LELO SONA.
What are the materials and specifications of the LELO SONA?
Materials: Body-safe silicone, ABS plastic
Finish: Smooth
Size: 115 x 55 x 50 mm
Weight: 136g
Battery: Li-Ion 530mA 3.7V
Charging: 2h at 5.0V 500mA
User Time: Up to 4 hours
Standby: 90 days
Frequency: 120Hz
Max. Noise Level: 50dB
Interface: 3-button interface
CLICK HERE TO DOWNLOAD LELO SONA (01) PDF DOCUMENT