Free English LELO SONA 2 TRAVEL (01) PDF document. Download the PDF, use the online viewer, or browse the FAQs for easy troubleshooting.


CLICK HERE TO DOWNLOAD LELO SONA 2 TRAVEL (01) PDF DOCUMENT

If this is not the document you want for this product, click here to see if we have any other documents for this product.

How to use the PDF below:
* Touchscreen: Swipe up/down with-in the PDF to scroll and pinch or spread with two fingers to zoom.
* Mouse: While your mouse is hovering over the PDF, use the mouse wheel to scroll and click on the – / + buttons at the bottom of the PDF to zoom.

How do I unlock the LELO SONA 2 TRAVEL for first-time use?

The LELO SONA 2 TRAVEL is locked for transportation. To unlock the device, simply connect the charger. Alternatively, you can consult the troubleshooting section regarding the interface lock.


What safety precautions should I follow when using the LELO SONA 2 TRAVEL?

Please observe the following safety guidelines:

Consult your healthcare provider with any questions or concerns you may have regarding your condition.

This product can be used by adults only. Keep out of reach of children.

People with reduced physical, sensory or mental capabilities or lack of experience and knowledge should use the device only if they have been given supervision or instruction concerning the use of the device in a safe way and understand the hazards involved.

Only use the product for the intended purpose. Sharing sex toys with other people may transmit sexual diseases. Do not share your sex toys with people other than your partner.

Use protective measures with your partner if necessary.

Do not use the product if you detect any cracks or signs of degradation on the covering material.

To prevent stains, do not keep your product on absorbent surfaces. If your product operates abnormally, turn off and consult the support section.

Do not use the product if one or more components are damaged.


How do I charge the LELO SONA 2 TRAVEL?

Insert the DC plug into the DC port at the base of your LELO SONA 2 TRAVEL.

Insert the mains plug into a USB Port. The LED on the interface of your LELO SONA 2 TRAVEL will pulse to indicate it is charging. When it is fully charged, the LED will emit a steady glow.

When the battery is running low, the LED on your LELO SONA 2 TRAVEL will emit a blinking white light.

Only use original chargers provided by LELO with your LELO SONA 2 TRAVEL.


How do I operate the LELO SONA 2 TRAVEL?

Before first use, charge your LELO SONA 2 TRAVEL for 2 hours.

Press and hold the (()) button to turn it on.

Press the (()) button to switch between 12 modes.

Use the + and – buttons to increase or decrease the intensity.

Press and hold the (()) button to turn off.


Where should I place the LELO SONA 2 TRAVEL during use?

The LELO SONA 2 TRAVEL is designed to stimulate the clitoris. Place the opening of the device over the clitoris for stimulation.


Does the LELO SONA 2 TRAVEL have an automatic shutdown feature?

Yes, keep in mind that LELO SONA 2 TRAVEL will initiate automatic shutdown every 20 minutes to assure the motor doesn’t overheat if the product is misused.


What type of lubricant should I use with the LELO SONA 2 TRAVEL?

For an even more pleasurable sensation, apply a liberal amount of LELO Personal Moisturizer to your body and to LELO SONA 2 TRAVEL before and during use. Do not use hand creams or silicone-based lubricants as they may make the silicone permanently tacky.


How do I clean and store the LELO SONA 2 TRAVEL?

The LELO SONA 2 TRAVEL is fully waterproof, making cleaning simple. Rinse and spray with LELO Toy Cleaner, then rinse again and allow it to dry.

Always clean your LELO SONA 2 TRAVEL thoroughly before and after each use. You can wash the silicone with warm water and antibacterial soap, rinse with clean hot water, and pat dry with a lint-free cloth or towel.

Never use cleansers containing alcohol, petrol, or acetone.

Avoid leaving your LELO SONA 2 TRAVEL in direct sunlight and NEVER expose it to extreme heat.

Store your LELO SONA 2 TRAVEL in a dust-free place and keep it away from products of other materials.


What should I do if the LED on my LELO SONA 2 TRAVEL does not pulse when the charger is connected?

If the battery is drained, it will require several minutes to acknowledge that it is being charged.

Ensure the charger is properly connected by checking the wall and DC sockets.


What should I do if the LELO SONA 2 TRAVEL does not activate when the button is pressed?

The battery may be empty. Recharge your LELO SONA 2 TRAVEL.

The interface of your LELO SONA 2 TRAVEL may be locked. Hold down the + and – buttons for 3 seconds.


What are the technical specifications of the LELO SONA 2 TRAVEL?

Materials: Body-safe silicone, ABS Plastic

Finish: Smooth

Size: 87 x 54 x 46 mm / 3.43 x 2.13 x 1.81 in

Weight: 67 g / 2.36 oz

Battery: Li-Ion 300 mAh 3.7 V

Charging: Up to 2 h at 5.0 V 500 mA

Rated Power Input: 5 V 1.5 W

Rated Power Output: 3.7 V 0.75 W

User time: Up to 2 h

Standby: 90 days

Frequency: 100 Hz

Max. noise level: < 70 dB

Interface: 3 buttons

NO IMAGE CONTENT AT THIS TIME. PLEASE CHECK BACK LATER

CLICK HERE TO DOWNLOAD LELO SONA 2 TRAVEL (01) PDF DOCUMENT


Leave comments, questions, reviews, tips, tricks, hacks or page errors below. Account not required.