Free English ASPIRE K3 (01) PDF document. Download the PDF, use the online viewer, or browse the FAQs for easy troubleshooting.
CLICK HERE TO DOWNLOAD ASPIRE K3 (01) PDF DOCUMENT
If this is not the document you want for this product, click here to see if we have any other documents for this product.
How to use the PDF below:
* Touchscreen: Swipe up/down with-in the PDF to scroll and pinch or spread with two fingers to zoom.
* Mouse: While your mouse is hovering over the PDF, use the mouse wheel to scroll and click on the – / + buttons at the bottom of the PDF to zoom.
How do I fill the ASPIRE K3 with e-liquid?
To fill the ASPIRE K3, unscrew the base hardware from the tank. Hold the tank upside down and fill your e-liquid into the tank, avoiding the airflow pipe in the center. Screw the base hardware back onto the tank.
How do I change the coil in my ASPIRE K3?
To change the coil in your ASPIRE K3, unscrew the base hardware from the tank. Unscrew the old coil unit from the base hardware. Screw in a new coil unit to the base hardware. Screw the base hardware back onto the tank.
How do I operate the ASPIRE K3?
To turn on the ASPIRE K3, press the fire button 5 times in succession. The LED will flash 3 times (blue and orange). Repeat to turn off. To vape, press and hold the fire button while inhaling. The LED will light up (blue/orange depending on battery level). To charge, connect the micro USB cable to the charging port and to an external charger or computer. The LED will display the charging status (orange for charging, blue for fully charged). The indicator light will flash orange/blue 20 times when the battery is fully charged.
What do the LED indicator lights on the ASPIRE K3 mean?
The LED indicator lights on the ASPIRE K3 show the battery charge level:
- Blue light: 3.8V-4.2V (60-100% charge)
- Orange light: 3.2V-3.79V (0-59% charge)
What are the specifications of the ASPIRE K3 battery?
The ASPIRE K3 battery has the following specifications:
| Capacity | 1200mAh |
| Output Voltage | 5.5V |
| Output Wattage | Maximum 30W |
| Resistance | 0.65Ω (1.8Ω BVC) |
| Continuous Discharge | 20A |
What are the specifications of the ASPIRE K3 atomizer?
The ASPIRE K3 atomizer has the following specifications:
| Capacity | 2.0ml |
| Resistance | 1.8Ω with organic cotton |
| Material | Pyrex Glass |
| Length | 55mm |
| Width | 18mm |
What should I do if the ASPIRE K3 is not working?
If your ASPIRE K3 is not working, try the following troubleshooting steps:
- Ensure the battery is fully charged.
- Check that the atomizer coil is correctly installed and tightened.
- Make sure there is e-liquid in the tank.
- Clean the connection points between the battery and the atomizer.
- Replace the coil with a new one if it is old or burnt out.
CLICK HERE TO DOWNLOAD ASPIRE K3 (01) PDF DOCUMENT