Free English ASPIRE NX100 MOD (01) PDF document. Download the PDF, use the online viewer, or browse the FAQs for easy troubleshooting.
CLICK HERE TO DOWNLOAD ASPIRE NX100 MOD (01) PDF DOCUMENT
If this is not the document you want for this product, click here to see if we have any other documents for this product.
How to use the PDF below:
* Touchscreen: Swipe up/down with-in the PDF to scroll and pinch or spread with two fingers to zoom.
* Mouse: While your mouse is hovering over the PDF, use the mouse wheel to scroll and click on the – / + buttons at the bottom of the PDF to zoom.
What are the technical specifications for the Aspire NX100 mod?
Wattage Range: 1-100W
Output Voltage Range: 0.00-8.50V
Resistance Parameters: While in both Wattage Mode and TC Mode, NX100 can fire coil resistance from 0.1Ω to 3.5Ω (Wattage may be less than 100 watts when coil resistance exceeds 0.1-0.4Ω).
Continuous Fire Time: Can be adjusted from 5s to 15s
Charging Port: Micro-USB charging port
Screen: 0.9 inch TFT color screen
Firmware update: Via Micro-USB port
Dimensions: 30*47*78.5mm
Battery: 3.7V single 26650 high rate discharge battery
What types of batteries are compatible with the Aspire NX100 mod and how do I select the battery type?
The NX100 mod uses a 3.7V single 26650 high rate discharge battery. It also comes with an 18650 battery adapter sleeve. The 18650 adapter sleeve allows you to use the 18650 battery instead of the 26650 battery.
Upon battery installation, the NX100 screen will display 2 battery icons labeled with 18650 and 26650. Please select the battery type you inserted.
Note: The maximum wattage output when using the 18650 battery is 75W, while maximum wattage output when using a 26650 battery is 100W.
What are the button functions and shortcuts on the Aspire NX100 mod?
| Button Action | Function |
|---|---|
| Click fire button 5 times | To Lock/Unlock Mod |
| Click fire button 3 times | To enter or exit stealth mode |
| “W” + “-“ | Child Lock & Unlock |
| “T” + “+” | TCR settings |
| “W” + “T” | Color settings |
| “+” + “-“ | To rotate screen |
| “T” + “-“ | Change Logo |
| “W” + “+” | Lock and Unlock buttons |
| Press fire button for 3s when locked | To turn system off |
| Pressing fire button while installing battery | To select language |
| “T” | To change coil materials and TCR settings (M1, M2, M3) under TC mode |
| Fire button | To fire or to Confirm |
| “+” / “-“ | To increase or decrease Voltage, Temperature, Wattage |
| “W” | To change between VV, VW, Bypass and CFBP (C1, C2, C3) modes |
How do I use the Customizable Firing Button Profiles (CFBP) on the Aspire NX100?
The CFBP feature allows for heat ramp-up (power curve) to be fine-tuned.
1. Press the “W” button to select VW, VV, Bypass, C1, C2, and C3. C1, C2, and C3 are CFBP modes.
2. While in CFBP, press the “W” button for 1.5 seconds to bring you to the CFBP interface.
3. While in the CFBP setting interface, press the “W” or “T” button to set time.
4. Press the “+” button to increase wattage and the “-” button to decrease wattage.
5. To save settings simply press the fire button.
What are the temperature control features and ranges for the Aspire NX100?
The temperature control features allow for the following ranges:
Temperature Range (F): 200-600F
Temperature Range (C): 100-315℃
Note: SS under TC Mode only supports SS316L coils.
How should I charge the Aspire NX100 mod?
Connect your NX100 mod to the charger and the screen will show a flashing battery icon. When the battery charge reaches 4.2V or is fully charged, the mod will stop charging and the screen will remain off.
The battery cannot be replaced while charging. Please unplug the USB cable before changing your battery.
When the battery charge drops below 0.5V or battery is incorrectly installed the mod will stop charging.
To accomplish 2A charge current, the adaptor output should be 5V/2A.
The mod supports passthrough charging. To lengthen the life of the mod, we do not recommend vaping while charging (passthrough).
How do I upgrade the firmware on the Aspire NX100?
1. Download the driver software from the Aspire website.
2. Connect your NX100 to your PC. The driver will detect your NX mod automatically.
3. Click “OpenFile” to choose the correct firmware file.
4. Click “Update” to upgrade your NX mod.
If it fails during the update process, please repeat step 3 to step 4.
What protection features are included in the Aspire NX100 mod?
Automatic Cut Off
Short Circuit Protection
Low Resistance Protection
Overheat Protection
Over charge Protection
Over Discharge Protection
CLICK HERE TO DOWNLOAD ASPIRE NX100 MOD (01) PDF DOCUMENT